|
| 1 | S&F in repair 15mm bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 2 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 3 | S & F in repairs 15 mm bore stop valve cast copper alloy, fancy type, chromium plated with long shank and cup, screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed. |
| 4 | S & F in repairs 20 mm bore stop valve cast copper alloy, fancy type, chromium plated with long shank and cup, screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed. |
| 5 | Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed. |
| 6 | S&F in repair Brass Chromium plated basin / wall / sink mixer suitable for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed . |
| 7 | S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed |
| 8 | S&F in repair 25 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed |
| 9 | S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed |
| 10 | S&F in repair waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 11 | S&F in repair waste coupling 40 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 12 | S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 13 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and directed |
| 14 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 15 | S & F in repair PVC waste pipe 32 to 40 mm suitable for WHB / Sink up to floor trap and fixed complete all as specified and directed |
| 16 | S & F in repairs brass chromium plated overhead shower 150mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed . |
| 17 | S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top), ISI marked, two layered, hoisted and fixed in position with and including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old existing water tank complete all as specified and directed |
| 18 | S&F in repair Rotational moulded polythylene 1000 capacity water storage tank (Cylindrical vertical with closed top), ISI marked, three layered, hoisted and fixed in position with and including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old existing water tank complete all as specified and directed |
| 19 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer in Charge. |
| 20 | S&F in repair Aluminium anodised towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engr- in-Charge. |
| 21 | S&F in repair brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engr- in-Charge. |
| 22 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed |
| 23 | S&F PVC (SWR), 110mm bore junction, single (Single Tee), equal or unequal, complete all as specified & directed. |
| 24 | S&F PVC (SWR), 110mm bore junction, single (Double Tee), equal or unequal, complete all as specified & directed. |
| 25 | S&F PVC (SWR) vent cowl 110mm bore, complete all as specified & directed. |
| 26 | S&F grating square 150mm size of PTMT (Minimum weight 100 qms), complete all as specified & directed. |
| 27 | S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to wall/floors 110mm bore including suitable clamps etc complete all as specified and directed. |
| 28 | S & F in repairs 110 mm dia, PVC bends, complete all as specified and directed |
| 29 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 30 | S&F 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed. |
| 31 | Taking up or down 15mm dia of CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed |
| 32 | Taking up or down 20mm dia of CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed |
| 33 | Taking up or down 25mm dia of CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed |
| 34 | S&F Galvanized iron steel tubing 15 mm bore medium grade including with fittings & fixtures, fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 35 | S&F Galvanized iron steel tubing 20 mm bore medium grade including with fittings & fixtures, fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 36 | Supplying and fixing of 25mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 37 | S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low / high level, white / coloured with inlet ball valve, float and handle including brackets, etc. complete all as specified and directed |
| 38 | S&F in repair vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed |
| 39 | S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed |
| 40 | M&L in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 41 | S&F in repair PTMT cabinet with mirror of size 600x450mm x124mm complete all as specified & directed. |
| 42 | Demolition of wall stone/brick masonry built in cement mortor including all quoins arches pillars etc, completed all as specified and directed. |
| 43 | M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 completed all as specified and directed. |
| 44 | S&F in repairs, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard Wardrobe 12mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity Index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified & directed |
| 45 | S&F in repairs, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard Wardrobe 20mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified & directed. |
| 46 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 47 | S&F in repairs 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and including all fittings like tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed. |
| 48 | S&F in repairs 12 mm thick Pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and including all fittings like tower bolt, handle, knob, magnet to timber frame work complete all as specified & directed. |
| 49 | S &F in repair 30mm width Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised, complete all as specified and directed by Engr-in-Charge |
| 50 | S&F of auto closing hinges openable at 0 degree suitable for kitchen cabinet shutters (Make-Hettich / Ebco / Prime), complete all as specified and direcetd |
| 51 | Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed. |
| 52 | Material and labour for 15mm thick rendering in cement mortar 1:4 on external surface of brick wall or concrete surfaces finished even & smooth without using extra cement, mixed with water proofing compound as per manufacturer's instruction complete all as specified and as directed by Engr-in-Charge. Note:- WPC shall be measured and paid separetely. |
| 53 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 54 | Material and labour for 10mm thick rendering in cement mortar 1:6 on internal surface of brick wall or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed. |
| 55 | Material and labour for 5mm thick rendering in cement mortar 1:3 on ceiling surface finished even & smooth without using extra cement complete all as specified and directed. |
| 56 | M&L for providing and applying wall care putty of 1mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and as directed |
| 57 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed. |
| 58 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings, complete all as specified and directed. |
| 59 | Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 60 | M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 61 | M&L for white marble 18-20 mm thick as in (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match laid over and including 10 mm thick screed bed / backing coat in CM 1:3 complete all as specified and as directed. |
| 62 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM (1:4) on fair face of brick or concrete surface, complete all as directed by Engr-in-Charge |
| 63 | M & L for Vitrified Ceramic tiles (dark shade) 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 64 | M & L for Vitrified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed. |
| 65 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 66 | M&L for machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado, windowcills, and pillar etc., laid over and including 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab including rubbing and polishing etc., complete all as specified and as directed. |
| 67 | M&L machine pressed precast concrete interlocking pavers block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment, complete all as specified and as directed |
| 68 | All as per item no.123 but except tiles, complete all as specified and directed. |
| 69 | M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 70 | Rounding to edges of stone slabs one edge, such as in steps, cooking plaform, and other glazed similar situations, complete all as specified and directed |
| 71 | Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed |
| 72 | S&F Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling, complete all as specified and directed |
| 73 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 74 | S&F 10mm thick without relevant PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I. / M.S. as per pecification and drawing, complete all as directed by Engr-in-Charge |
| 75 | M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth with out using extra cement, complete all as specified and directed. |
| 76 | S&F in repair of Teak parquet of size & shade as directed Sqm & Pattern approved By GE (matching existing shade and pattern) including fixing, sanding and polishing of the same with water based polish and fixing with grove of each other including dismantling of old wooden flooring complete all as specified and directed by Engr-in-Charge |
| 77 | M&L for French polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old/new works and applying one or two coats of French polish complete all as specified and directed |
| 78 | S&F in repairs toilet paper holder of stainless steel chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed |
| 79 | M & L for new or old external wall surface by wire brushing/grinding in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with mechanical water nozzal with clean water & allow to dry. Fill visible cracks/ joints by non-shrinkable polymer modified crack sealing compound (Asian Paints, Berger Paints or Equivalent) by opening the cracks in V-Groove & allow it to dry for 24 hours. Apply one coat of undiluted fibre reinforced liquid applied elastomeric waterproofing membrane, impregnated with synthetic fibre (PU modified) (with mechanically airless paint sprayer machine) and allow it to dry for 6 hours approx. The coverage should be approx 4sqm/ltr/coat. Thereafter apply 02 coats of 100% acrylic emulsion water based top coat with silicone additives and having rich sheen (Approx Coverage 5- 5.5sqm / litre / 2 coats) (with mechanically airless paint sprayer machine) & match with brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding necessary security for the workers for any height, covering etc complete all as per specified and directed. Note:- (i) This item shall be executed by authorised applicator only. (ii). The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account. |
| 80 | S&F in repair 15mm angle cock with flange cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge. |
| 81 | S&F in repair two -in- one tap cast copper alloy chromium plated fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for 15mm bore iron pipe or for unions, complete all as directed by Engr-in-Charge |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 83 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engr-in-Charge |
| 84 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge |
| 85 | M & L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 86 | M&L for preparation/cleaning of old/new chequred tiles, Interlocking tiles and any floor surfaces of any descriptions and any position & applying one coats of terra cotta exterior grade paint on floor/tiles etc complete all as specified and directed |
| 87 | M & L for Chequred cement concrete designer tiles of size 300X300X20 to 25mm thick with grey cement and pigment (color), glossy finish set jointed and pointed in neat cement slurry in floors / path etc laid over and including 20mm thick screed bed In CM 1:6 complete all as specified and as directed. |
| 88 | S&F in repair stainless steel, Chromium plated soap dish including fixing arrangement etc. complete all as specified and directed . Please Enable Macros to View BoQ information |
