|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed. |
| 2 | M&L for brick work with fly ash brick 75 kg/cmsq compressive strength old size, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone/concrete walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick cement plaster, (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surface complete all as specified and directed. |
| 5 | M&L for preparing newly plastered surfaces of walls and applying two coats of Cement base paint over one coat of primer complete all as specified and directed. |
| 6 | M&L for preparation/complete removal of old exterior surface and applying two coat of cement base paint including cracks filled wall care putty wherever necessary complete all as specified and directed. |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 8 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410-W (Gde-E-250) Quality A) including distance pieces, cleats etc complete all as specified and directed. |
| 9 | S&F in repair Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 5 cm but n.exc 10 cm long complete all as specified and directed. |
| 10 | M&L for Preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed |
| 11 | S&F in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including restraining & resecuring including making good staples, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismantling complete all as specified as directed |
| 12 | S&F in repair for concertina coil fencing with punched tape concertina coil 600mm dia having 50 nos round per 6 m length,spring core wire (2.5 mm thick) and fixing the same with GI staple and GI clips or any type of angle to fixed or any height (use scaffholding) to retain horizontal necessary bolts MS sprkes including dismantling complete all as specified and directed. |
| 13 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 14 | M&L for Reinforced Cement concrete (1:2:4) type B0 using (12.5 mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including formwork comlete all as specified and directed. |
| 15 | S & F in repair TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping ends and binding M/s wire (annealed) not less than 0.9 mm dia Fe-410-W(Gde.E-250) quality A complete all as specified and as directed. |
| 16 | S & F TMT bars 06 mm dia and 08 mm dia cut to length bent to shape required including cranking, bending spirally for hooping ends and binding M/s wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 17 | Demolition of cement concrete unreinforced of any description & any position and disposing of the rubbish materials in low laying areas of defence land complete all as specified and as directed. |
| 18 | M&L for 75mm thick PCC 1:3:6, type C-2 using (40mm graded stone aggregate) as in plinth protection and similar places finished even & smooth without using extra cement marking 10mm wide joints at every 3m interval and every corner, filled with hot mix of bitumen complete all as specified and directed. |
| 19 | M&L for 100 mm thick Plain Cement Concrete (PCC) 1:2:4 Type B-2 using (40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all specified and directed. |
| 20 | M&L for 35mm thick (measured solid) precast cement concrete (1:2:4) type B-0 using (12.5mm graded stone aggregate) as in louvers or jallies set in cement mortar (1:4) including all necessary formwork and reinforcement including dismantling existing jalli of any description complete all as specified and directed. |
| 21 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
