|
| 1 | Excavation in trenches for laying pipes and fittings, n exc 1.5 m wide and not n exc 1.5 m depth and getting out in hard dense soil including grading and ramming bottom surface complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning , filling in including spreading, levelling , watering & well ramming in layers n.exc 25cm including making good disturbed surface to original levels complete all as specified and directed |
| 3 | Removal of exacavation material to a distance n exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed |
| 4 | Supplying, laying, testing and commissioning of ductile iron pipe (DI Pipe) (ISI marked IS No 8329:2000), laying above the ground of nominal diameter 200mm, class K -9, with internal cement mortar lining and external bitumen coating with flanged at both the ends with & including all jointing material and painting with two coats of synthetic enamel paint (post office red colour) including removing the old unserviceable pipes, of any type complete all as specified and directed. |
| 5 | Supplying, laying, testing and commissioning of ductile iron pipe (DI Pipe) (ISI marked IS No 8329:2000), laying above the ground of nominal diameter 150mm, class K -9, with internal cement mortar lining and external bitumen coating with flanged at both the ends with & including all jointing material and painting with two coats of synthetic enamel paint (post office red colour) including removing the old unserviceable pipes, of any type complete all as specified and directed. |
| 6 | Supplying, laying, testing and commissioning of ductile iron pipe (DI Pipe) (ISI marked IS No 8329:2000), laying above the ground of nominal diameter 100mm, class K -9, with internal cement mortar lining and external bitumen coating with flanged at both the ends with & including all jointing material and painting with two coats of synthetic enamel paint (post office red colour) including removing the old unserviceable pipes, of any type complete all as specified and directed. |
| 7 | S&F in repair or replacement and commissioning of 150 mm bore MS ERW pipe class 'B' in standard length conforming to IS 1239 part -I (ISI Marked) duly painted with two coats synthetic enamel paint of first quality over coat of primer for complete all as specified and as directed. |
| 8 | S&F in repair or replacement and commissioning of 100 mm bore MS ERW pipe class 'B' in standard length conforming to IS 1239 part -I (ISI Marked) duly painted with two coats synthetic enamel paint of first quality over coat of primer for complete all as specified and as directed. |
| 9 | S&F in repair or replacement and commissioning of 80 mm bore MS ERW pipe class 'B' in standard length conforming to IS 1239 part -I (ISI Marked) duly painted with two coats synthetic enamel paint of first quality over coat of primer for complete all as specified and as directed. |
| 10 | Supply, laying, jointing DI fittings (DI Specials) conforming to IS 9523 such as bends, caps, collars, Tees, Tail piece, Elbows, Tapers and Reducers etc complete all as per site requirement. Note:- The DI specials shall be of minimum class K-9 and from same manufacturer as of DI pipe. |
| 11 | Supply & fix in repair double door fire hose cabinate box with arrangement for holding 2 Nos 15m long hose pipe of size not less than 800mm x 600 mm x 250 mm, made out from 16 Gauge MS sheet duly painted with two coats of (red colour) synthetic enamel paint over a coat of red oxide zinc chrome primer with double leafed glazed shutters (glazed with 4 mm thick transparent fiber sheet) mounted over the MS angle iron 50mm x 50mmx 6mm frame having minimum 1m long, 4 Nos legs, and grouted the same into PCC (using1:3:6 type) and must have the legend \\" FIRE HOSE\\" painted prominently in the graphic style complete all as specified and directed by Engr-in-Charge |
| 12 | S&f in repair/ replacement of pressure gauge 4\\" dia 0 to 14 Kgs rating in existing position complete all as specified and directed. |
| 13 | S&F in repair / replacement of strainer for sucction 150 mm more flanged type ISI marked complete all as specified and dirrected. |
| 14 | S&F in reapir /replacement of channels / angles for foundations, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and directed by Engr-in-Charge |
| 15 | Supply and fix in repair sluice valve with flanged ends 150 mm bore cast iron body, flanged and drilled end non rising type with nuts, as per IS 14846, ISI marked including all joints, class PN 1.6 complete all as specified and directed. |
| 16 | Supply and fix in repair sluice valve with flanged ends 100 mm bore cast iron body, flanged and drilled end non rising type , SS spindle with nuts, as per IS 14846, ISI marked including all joints, class PN 1.6 complete all as specified and directed. |
| 17 | Supply and fix in repair sluice valve with flanged ends 80 mm bore cast iron body, flanged and drilled end non rising type , SS spindle with nuts, as per IS 14846, ISI marked including all joints, class PN 1.6 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 18 | Supply and fix in repair sluice valve with flanged ends 80 mm bore cast iron body, flanged and drilled end non rising type , SS spindle with nuts, as per IS 14846, ISI marked including all joints, class PN 1.6 complete all as specified and directed. Please Enable Macros to View BoQ information |
