|
| 1 | M&L for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose disintegrated portion of any height in any situation / floor (incl provn of supports, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/sqm and dubbing / filling with with PCC (1:2:4), type B- 0 using 12.5 mm graded aggregate , 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm , finished even and smooth to desired shape and applying two coat of weather proof emulsion paint to match with existing surface complete all as specified and directed.Note : (i) Unit rate of this items includes the cost of scaffolding , formwork etc and nothing extra shall be paid on account of variation in height. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving exc.15 cm thickness above ground level and removing the rubbish outside MoD land complete all as specified & directed.Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 3 | Material and labour for 75mm thick PCC 1:3:6 type C-2 ( using 20mm graded aggregate) as in plinth protection laid in alternate bays, surface finished even & smooth without using extra cement including making joints complete all as specified and directed. |
| 4 | Material and labour for 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed. |
| 5 | Material and labour 40mm thick PCC (1:2:4) type B-1 ( using 20mm graded aggregate) as in floor surface finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | Material and labour for PCC 1:2:4 type B-1 ( using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed. |
| 7 | Dismantling floor, hearth wall tiling inculding cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off the premises. Note :- The demolished material shall be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 8 | Material and labour for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) size of tile 300mmx300mm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 9 | Supply and laying Glazed ccoloured ceramic tiles in vertical surface 300x 200x 7 mm / 450X 300X 7mm thick, (Square/rectangular ) dark/printed in vertical surface set & jointed in neat cement slurry and pointed with coloured cement to match, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 10 | Material and labour for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 complete all as specified and directed. |
| 11 | Material and labour for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 10mm thick backing coat on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and directed. |
| 12 | Supply and laying chequered cement concrete tiles glossy finished 300mmx300mmx22mm thick made by table vibratory method set, jointed and pointed in neat cment slurry as in floors with grey cement & pigment tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 complete all as specified and directed. |
| 13 | M&L for sand cushion (Tibba Sand), filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed. |
| 14 | M&L for precast concrete coloured interlocking paver block rubber moulded, vibratory finished of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-35 Grade of approved colour and design complete all as specified and directed |
| 15 | M&L for precast concrete coloured interlocking paver block rubber moulded, vibratory finished of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade of approved colour and design complete all as specified and directed |
| 16 | Demolition of brick or stone masonary built in cement morter incl all quions, arches, pillar etc. complete all as specified and directed. |
| 17 | Material and labour for brick work with sub class -B bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and directed. |
| 18 | All as per description of serial Item No. 17.00 here in before but as in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 20 | Material and labour for 15mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Material and labour for 10mm thick rendering on concrete surface in cm 1:3 as in ceiling surface to be finished even and smooth without using extra cement complete all as specified and directed.. |
| 22 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | Material and labour for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 24 | M & L for Preparing surface of new plastered surface and applying two coat of oil bound distemper emulsion over one coat of primer complete all as specified and directed. |
| 25 | Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 26 | M & L for preparing surface of new plastered surface and applying two coats of weather coat exterior emulsion paint over and including a coat of primer, tint as approved by Garrison Engineer in camouflage pattern to match existing surface complete all as specified and directed. |
| 27 | M&L for preparation of old decorated surfaces of ceiling/bottom of chajja and similar suspended work (plastered or un plastered) including cornices, plaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of white wash complete all as specified and directed. |
| 28 | M&L for preparation of old decorated surfaces of walls (plastered or un plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed. |
| 29 | M&L for preparation of old decorated painted surfaces of walls (plastered or unplastered) including all cornices pilasters etc by brooming down or steel wire burshing, scraping down smoke, soot, moulds, moss and efflorescence salts, trading oil and greasy spots etc incl washing, rubbing down and stopping and applying one coat of weather proof exterior acrylic emulsion in camouflage pattern/as per existing surface as approved upto any height complete all as specified and directed and directed . |
| 30 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved complete all as specified and directed. |
| 31 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved complete all as specified and directed. |
| 32 | M&L for preparation of old painted surfaces of any description not other wise described including filling the depressions with cement based wall care putty and applying one coat of white wash on walls complete all as specified and directed. |
| 33 | Taking down chowkhats or frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 34 | Taking down chowkhats or frames but with shutters (with out taking off shutter from the frames) Exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed. |
| 35 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed. |
| 36 | Supply and fixing 150 mm size extruded aluminium aluminium alloy handels fabricated type, anodised fixed with stainless steel screws complete all as specified and directed. |
| 37 | Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. |
| 38 | Supplying & fixing 1.25 mm thick Pressed Steel door frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 39 | Supplying & fixing 1.25 mm thick Pressed Steel door frames size 125x60mm for double doors with one or more rebates inclding necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 40 | Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed. |
| 41 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used instead of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS framewelded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II. |
| 42 | S&F factory made 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides include for the provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. |
| 43 | S & F factory made Glazed & Skeleton shutters 35mm thick open rebated & prepare to received glass, gauge etc edges of framing plain chamfered or rounded in window, ventilator etc are provided with stiles and rails in 2nd class hard wood all as specified in SSR part-I, section 8 clause 8.20(b). |
| 44 | S&F 35 mm thick 2nd class hardwood, Plain, framed, panelled shutters (any number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm BWP commercial ply with commercial veneering on both faces; supplied and fitted to chowkhats |
| 45 | S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both guage and glass shutter comprised gauzed glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :-(i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. (ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.(iii) MS tower bolt 150mm long 2 No per leaf. (iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf (vii) 10 mm squre guard bar @ 10 cm c/c (viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window(x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.xii) Two coats of synthetic enamel paint over one coat of red oxide primer. Note: (i) Windows shall be provided as per the TD of Chief Engineer Chandigarh Zone, TD-219 i.e typical details of Box window (Steel) with fly proof shutter.(ii) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account. |
| 46 | S & F mild steel box type ventilator partially fixed type with glazing bar with mesh & glass, partially with two shutters all as per item No 45 above but top hung complete all as specified and directed. |
| 47 | Material and labour for surfaces of any description not other describe over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, including preparation of new wooden surface complete all as specified and directed. |
| 48 | Material and labour for surfaces of any description not other describe ver 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, including preparation of new steel surface complete all as specified and directed. |
| 49 | Supply and fixing Aluminium butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed. |
| 50 | Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. |
| 51 | Supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed. |
| 52 | Supply and fixing in stainless steel wirecloths 0.45 mm nominal dia of wire and average width aperature 1.40mm and fixed with stainless wire staples complete all as specified and directed.. |
| 53 | S&F in repairs stainless steel wirecloths 0.45 mm nominal dia of wire and average width aperature 1.40mm and fixed with stainless wire staples complete all as specified and directed.. |
| 54 | Supply and fixing 140mm long floor door stopper of aluminium alloy body and toungue, anodised wirh hard drawn steel spring,fixed to door shutter fixed with stainless steel screws complete all as specified and directed. |
| 55 | S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes including Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads complete all as specified and directed. |
| 56 | Supply and fix in repairs heavy duty Stainless steel (Grade 305) curtain rods 25mm dia complete all as specified and as directed. |
| 57 | Supply and fix in repairs Stainless steel (Grade 305) brackets with finnals (open ends) suitable for curtain rods of 25mm dia complete all as specified and as directed. |
| 58 | Supply and fix in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 25mm dia complete all as specified and as directed. |
| 59 | Taking up or down 15 mm dia steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. |
| 60 | Taking up or down 20 mm bore tubes & connections including clearing for refixing or removal to store complete all as specified and directed. |
| 61 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 62 | S & F 20mm bore of tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 63 | Dismantling water tanks any type of capacity Exc 250 but n.exc 500 liters complete all as specified and directed. |
| 64 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) tripple layered white, hoisted and fixed in position, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 65 | S&F in repair 15mm bore long body Angle cock fancy type chromium plated screwed down high pressure complete all as specified and directed. |
| 66 | S&F in repair 15mm long body bib taps long shank cast copper alloy, Fancy type, Chromium plated with crutch or butterfly handle screwed for iron piper or for brass ferrule complete all as specified and directed. |
| 67 | S&F in repair Pillar taps long body fancy type with capasten head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 68 | S&F in repairs 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 69 | S & F in repair towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden/plastic cleats complete all as specified and directed. |
| 70 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 71 | S&F in repairs 100 mm dia Stainless steel grating complete all as specified and directed. |
| 72 | S&F in repairs 75 mm dia Stainless steel with hole grating complete all as specified and directed. |
| 73 | S&F in repairs waste down pipe 32/40mm bore for wash basin/sink complete all as specified and directed |
| 74 | S& F in repair vetrious china squatting pan orissa pattern size 580 x 440mm white, with integral foot rests excluding flushing cistern and flush pipe but including traps as required complete all as specified and directed |
| 75 | S&F vitreous china wash down water closet pan pedestal pattern ( type white including PVC seat cover , connection to waste pipe and flushing pipe complete all as specified and directed. (fixed in repair) |
| 76 | S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets, float and handle, L-Bend complete all as specified and directed |
| 77 | S&F in repairs vitreous china wash basin, white, flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper but including bracket complete all as specified and directed |
| 78 | Demolition up to 100/75mm bore and breaking up drain pipes (AC/reinforced concrete/salt glazed ) complete all as specified and directed |
| 79 | S & F 110mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trench or in floor complete all as specified and directed |
| 80 | S & F 75mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trench or in floor complete all as specified and directed |
| 81 | S&F PVC (SWR) bends of 110 mm bore complete all as specified and directed |
| 82 | S&F PVC (SWR) bends of 75 mm bore complete all as specified and directed |
| 83 | S & F in repair 75mm bore PVC (SWR) floor trap, with grating plain/ whole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 84 | S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 85 | M&L for PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation, and other similar work complete all as specified and directed. |
| 86 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 87 | S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 |
| 88 | S&F in repairs Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossings with and provision of galvasnised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line wire to be measured) |
| 89 | Restraining resecuring, including making good staples etc. Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossings with and provision of galvasnised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line wire to be measured) |
| 90 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 91 | M & L for Pre-painted galvalume aluminum zinc coating GIaluminum zinc coating GI based corrugated or semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 92 | M& L for Pre-painted galvalume aluminum zinc coating GIaluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 93 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed section etc complete all as specified and directed. |
| 94 | M&L for MS work in Roof trusses (framed), trussed, purlins, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or reveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
