|
| 1 | Dismantling of brickwork or stone/ boulder masonry, built in cement or cement lime mortar includingall quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles including removal of debris from site to outside MoD land. |
| 2 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radious built in cement mortar (1:4) all as specified. |
| 3 | All as per item No. 2.00 above but EXCEPT BRICKS complete all as specified.NOTE: - Old Serviceable Bricks obtained from Item No. 1.00 above shall be re-used under this Item. |
| 4 | Taking down cement plaster any description on walls including racking out joints, hacking for key and scrubbing down with water including removal of debris from site to outside MoD land all as specified. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces on wall including finishing surface even and fair without using extra cement all as specified. |
| 6 | M&L for preparation of newly plastered or un-plastered surfaces of walls and applying two coats of cement base paint all as specified. |
| 7 | M&L for preparation of old decorated surfaces of wall /ceiling and cornices by booming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of weather proof exterior emulsion paint with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI by allowing 6-8 hrs to dry the surface for painting of subsequent coats as directed at a height upto 20 mt from ground level for over head water tanks including necessary scaffolding as required complete all as specified. |
| 8 | M&L for preparation of old decorated surfaces of wall /ceiling and cornices by booming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of weather proof exterior emulsion olive green colour as base coat and making good camouflage pattern by applying two more coats of different coloured patch in different shapes as approved by GE at a height upto 20 mt from ground level for over head water tanks including necessary scaffolding as required complete all as specified. |
| 9 | Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition including removal of debris from site to out side MoD land. |
| 10 | M&L for reinforced pre-cast cement concrete in landing,cover slabs,chullah hoods,chajjas,shelves and simillar items with plain faces in cement concrete 1:1.5:3 type A-1 using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 all as specified. |
| 11 | M&L for mild steel TMT bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified. |
| 12 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified. |
| 13 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level including removal of debris from site to out side MoD land all as specified. |
| 14 | M&L for 100 mm thick cement concrete type C-2 mix 1:3:6 using 40 mm graded crushed stone aggregate as in floor, hardstanding and similar work etc all as specified. |
| 15 | M&L for 100 mm thick cement concrete type B-1 mix 1:2:4 using 20 mm graded crushed stone aggregate as in floor, hardstanding and similar work etc including finishing even and fair wihtout using extra cement all as specified. |
| 16 | M&L for forming construction joints 30 mm deep x 10 mm wide filled with sealing compound grade 'A' all as specified. |
| 17 | M&L for cement concrete in 1:4:8 mix, type D-2 using 40 mm graded crushed stone aggregate as in sub base of interlocking tiles/ chequered tiles etc all as specified. |
| 18 | M&L for sand filling under paver block/ floors or in foundation including wartering and consolidation all as specified. |
| 19 | M&L for 60 mm thick factory made machine pressed precast concrete interlocking paver block with grey cement and pigments of any shape and size confirming to IS 15658-2006 in M-35 grade all as specified. |
| 20 | S&F for factory made chequered cement concrete tile of size 200 mm x 200 mm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor laid over 20 mm thick screed bed or bedding layer in cement mortar1:6 mortar all as specified. |
| 21 | M&L providing, cement concrete in 1:2:4 mix, type B-0 using 12.5 mm graded crushed stone aggregate as in coving, mud stops, rounded or chamfered on edges etc all as specified. |
| 22 | Dismantling structural steel work including doors, gates but excluding framed steel truss etc all as specified. |
| 23 | M&L for rolled mild steel in framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade E-165 complete all as specified. |
| 24 | M&L for preparation of newly or previously untreated steel and iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified. |
| 25 | M&L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint all as specified. |
| 26 | M&L in repair welding not exc 2.5 cm in length and thickness of metal to be welded not exc 6 mm all as specified. |
| 27 | M&L in repair welding exc 2.5cm but n exc 5cm in length and thickness of metal to be welded not exc 6 mm all as specified. |
| 28 | M&L for complete removal of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer at a height up to 20 mtr form ground level all as specified. |
| 29 | M&L for providing precast cement concrete 1:2:4 mix, type B-1 using 20 mm graded crushed stone aggragate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, anchorage blocks, kerb stone and similar work with plain fair faces, including chamfered, weathering, throating etc and setting in cement mortar 1:4 complete all as specified. |
| 30 | M&L for preparation of old painted surfaces of pre-cast cement concrete Kerb stones, parapets etc and applying one coat of synthetic enamel paint complete all as specified. |
| 31 | M&L for preparation of newly painted surfaces of pre-cast cement concrete Kerb stones, parapets etc and applying two coats of synthetic enamel paint over a coat of primer complete all as specified. Please Enable Macros to View BoQ information |
| 32 | M&L for preparation of newly painted surfaces of pre-cast cement concrete Kerb stones, parapets etc and applying two coats of synthetic enamel paint over a coat of primer complete all as specified. Please Enable Macros to View BoQ information |
