|
| 1 | Taking down frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame, complete all as specified and as directed. |
| 2 | Taking down frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame, complete all as specified and as directed. |
| 3 | Taking down shutters exc 1 sqm and n exc 2 sqm each of any description, complete all as specified and as directed. |
| 4 | Taking down shutters exc 1 sqm and n exc 2 sqm each of any description including resecuring, easing ,adjusting, welding etc and refixing in same or different opening of similar nature complete all as specified and as directed. |
| 5 | S&F pressed steel frames (1.25mm thick MS Sheet) of size 125x60mm for doors with one or more rebates including necessary fixing, lugs, hinges, lock strike plate, etc with one shop coat of primer complete all as specified and directed. |
| 6 | S&F pressed steel frames (1.25mm thick MS Sheet) of size 105x60mm for doors with one or more rebates including necessary fixing, lugs, hinges, lock strike plate, etc with one shop coat of primer complete all as specified and directed. |
| 7 | S&F Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification making the surface good complete all as specified and directed. |
| 8 | S&F Factory made coloured solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed |
| 9 | S&F 35mm thick factory made plain, framed, panelled shutters (any No. of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of 2nd class hard wood fitted to chowkats complete all as specified and directed. |
| 10 | Supply and fixing 30 mm thick factory made flush shutters, solid core construction, with block board core, both face is covered with 0.9mm thick decorative laminated surface finish, colour or pattern as approved, fixed with approved adhesive as per manufacturer's instructions with lipping/frame to match complete all as specified and as directed. |
| 11 | M&L Factory Made 35mm thick 2nd class hard wood glazed & gauged skeleton shutters open rebated and prepared to received glass/gauge etc. ( without sash bars) edges of framing plains chamfered or rounded fitted with cut and mitred bead for securing glass etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsall as specified.Note : - Wire mesh and glazing shall be measured and paid separately. |
| 12 | M& L for cement concrete pcc type C0 1:3:6 using (12.5 mm graded aggregate) as in filling in hollow pressed steel frames etc. complete all as specified & directed. |
| 13 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 14 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.. |
| 15 | S&F 100 mm long butt hinges type B-22 extruded aluminium alloy with galvanised mild steel hinge pine complete all as specified and directed. |
| 16 | S&F aluminium handles 150 mm,cast type ,anodised complete all as specified and directed. |
| 17 | Supply and fixing 60x40 mm door stopper hanging type, consisting two leg aluminium anodised natural shade matt finish aluminium rod with rubber shoe complete all as specified and directed. |
| 18 | S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 19 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 20 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | S&F 300 mm long aluminium anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of extruded section and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 22 | S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauzed glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :-i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm square guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window(x) 3mm thick sheet glass ordinary quality and with oil putty in square n exc 0.50 sqm in each pane fixed in glazed /gauge skelton shutter of window (xi) Two coat of synthetic enamel paint over a coat of primer.xii) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Note: (i) Windows shall be provided as per the TD i.e typical details of Box window (Steel) with fly proof shutter.(ii) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account. |
| 23 | S & F mild steel box type ventilator partially fixed with glass and partially fixed with two glass and gauzed top hung type complete all as per item ser No 22 here in above. |
| 24 | S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes and Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured wall tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid, over and including 10 mm thick backing coat in CM 1:4 complete all as directed by Engineer-in-Charge. |
| 26 | Dismantling boarding, any description any size, fixed in any position with screws complete all as specified and directed. |
| 27 | M&L for providing cupboard shutter as in repair of required size at site made out of 18 mm thk PVC colour sheet and provision of shutters one side decorative pre laminated PVC sheet and all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned, complete all as specified and directed. |
| 28 | S&F 18 mm thick Celuka Ply of density 600kg/cum of plain colour Sheet for kitchen cabinets sides, top, bottoms and shelves inside the cabinet, complete all as specified and directed. |
| 29 | S&F 18 mm thick Celuka Ply of density 600kg/cum one side prelam/Rigidlam (Colour/Shade as approved by GE) and other side plain white colour to make kitchen cabinet shutters / drawer etc. complete all as specified and directed. |
| 30 | S & F Continuous (piano) hinges, 40mm width of flaps when open brass, bright finish or electro galvanised, complete all as specified and directed. |
| 31 | Supply and fixing Stainless Steel (SS 304) handles 100 mm size for Kitchen Cabinet Shutters, complete all as specified and directed.Make: Hettich / Godrej/ Ebco |
| 32 | Supply and fix in repair Auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters complete all as specified and directed.Make: Hettich / Godrej/ EbcoNote : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion. |
| 33 | Supply and fix in repair Ball bearing drawer channel telescopic type (500mm) Full Extension Load of load bearing capacity 45 Kg etc,complete all as specified and directed.Make: Hettich / Godrej/ EbcoNote : Each pair means 2 Nos of telescopic channel, one piece fixed on left side and another piece fixed on right side. |
| 34 | Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of primer (red oxide primer) of any description over 10cm width or girth etc, complete all as specified and directed. |
| 35 | M&L for preparation of new wooden surfaces of girth exc 10cm and painting two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 36 | M&L for providing and injecting emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 concentrate along the external wall of building below concrete or masonry apron or on internal wall along and above the skirting using chemical emulsion @ 2.25 litre per linear metre including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement 2 Coarse sand) in apron complete all as specified and directed. |
| 37 | M&L for providing and injecting chemical emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 of soil under existing floors using chemical emulsion @ 1 Litre per hole 300mm apart including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement & 2 Coarse sand) to match the existing floor and making good the disturbed surfaces to match with the existing surface complete all as specified and directed. |
| 38 | M&L for providing and injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and making good the surface by applying the matching distemper/whitewash complete all as directed and specified. |
| 39 | S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia complete all as specified and directed |
| 40 | S&F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed |
| 41 | S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed |
| 42 | S&F ArmGyp-FB ceiling snow Frost vinyl face, washable metallized polyester foil backing ,vinyl covered edges, suspended ceiling on suspension system. Panels shall be of Size 600 mm x 600 mm x 9 mm, having 7 kg/SQM, including providing Grid system for fixing ceiling tiles shall comprise of suspension system with true horizontal level, suspended on inter locking tegular “Select” system with 15mm black flanges incorporating a 4mm central reveal in black colour and a load carrying capacity of minimum 14.50 kg/m2 with birdsmouth notches metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 15mmx25mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600 mm centre to centre to form a grid of 1200mmx600 mm and secondary cross \\"T\\" of length 600 mm and size 15mmx25mm made of 0.30 m thick (minimum) sheet to be interlocked at middle of the 1200mmx600 mm panel to form grids of 600mmx600mm and wall angle of size 20mmx15mmx0.3 mm and laying false ceiling tiles of approved texture in the grid including, required fitting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 15 mm of all T-sections all complete for all heights including dismantling of old ceiling, complete all as specified and directed. |
| 43 | M&L for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by Engineer-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including dismantling of old panelling complete all as specified and directed |
| 44 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 45 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 46 | S&F double action floor door spring hydraulically regulated made up minimum 1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 47 | S & F top pivot of casting body suitable for aluminium door complete all as specified and directed. |
| 48 | Supply and fixing 170 to 200 mm size extruded aluminium alloy handles fabricated fancy type, anodised fixed with stainless steel screws complete all as specified and directed. |
| 49 | Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. Please Enable Macros to View BoQ information |
| 50 | Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. Please Enable Macros to View BoQ information |
