|
| 1 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc Complete all as specified and directed |
| 2 | Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified & directed. |
| 3 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion embedded in concrete, brick work, masonary etc,and making good disturbed ground complete all as specified and directed. |
| 4 | Dismantling fencing wire mesh, any type any size complete all specified and directed. |
| 5 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed. |
| 8 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge |
| 9 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge |
| 10 | S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills,tubular trusses and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge. |
| 11 | S&F mild steel work as in joist channels, angle or tee section, fixed independently w/o connecting plate conforming to Fe.290.Gde-E-165, incl cutting tops to shape as directed, drilling holes,notching for wire, welding work etc. flat iron fillets incl all necessary drilling, bolting or riveting, etc. ,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;, and similar work including necessary cutting,drilling,welding etc. complete all as specified and directed by engr-in-charge |
| 12 | Providing and fixing at sitein repair Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite ) screens cut on CNC machine of approved design & Colour, measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with MS Hollow pipes frame & MS Square bar incl stainless Steel Screws / Fastners or required length all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 13 | Excavation of post holes (or similar holes) in Soft / loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good final finished surface complete all as specified and directed. |
| 14 | M&L Cement concrete type C2 1:4:8 (40 mm graded aggregates) in foundations, filling and mass-concrete incl required formwork complete all as specified and directed. |
| 15 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 16 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 17 | Supply only chain link MS galvanised fencing, any size, shape or any type complete all as specified and directed by Engr-in-charge. |
| 18 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement complete all as specifed & as directed. (incl new brick work) |
| 19 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately) complete all as directed.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate. |
| 20 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate Please Enable Macros to View BoQ information |
| 21 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate Please Enable Macros to View BoQ information |
