Tender For Periodical Works Of Various Md Accns And Otm Accns At annual rate contract Doom Dooma Under Ge(Af) Chabua
Tender Value
1.45 Crore
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chabua → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Works Of Various Md Accns And Otm Accns At annual rate contract Doom Dooma Under Ge(Af) Chabua
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jun-2026 | Revised dates | Date | 11-Jul-2026 |
| 2 | 04-Jul-2026 | Date amendment | Date | 11-Aug-2026 |
| 3 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
| 4 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M & L for making good popout/repair in concrete slabs (Exposed rigid pavement) by cutting spilled joints sides perpendicular and parallel to edge by mechnical tools like diamond cutter,cleaning with compressed air under pressure and filling with Elastomeric concrete after application of specified primer all as per manufacturers insturction and specification copmlete and removal of rubbish to a distance exc 250M but n.exc 500m complete all as specified and directed. |
| 2 | M & L for making good edge/repair in concrete slabs (Exposed rigid pavement) by cutting to 40mm deep and cutting spilled joints sides perpendicular and parallel to edge by mechnical tools like diamond cutter,cleaning with compressed air under pressure and filling with Elastomeric concrete after application of specified primer all as per manufacturers insturction and specification copmlete and removal of rubbish to a distance exc 250M but n.exc 500m complete all as specified and directed. |
| 3 | M & L for racking out of joint/removing old any sealing compound,dirt form construction joint 10mm wide (+3mm) and 40mm deep,cleaning the joint sides properly by mechanical means with diamond cutter ,filling the joints with closed cell ,medium density ,cross linked polyethylene foam backup rod of 12mm dia and applying bond breaker tape on top of backup rod for complete width of the joints,priming top with specified primer suitable for polysulfied based sealeant ,10mm thick including using masking tape on edges joints to avoid accidental spillage of esaleant on top surface of pavements complete all as specified and directed. |
| 4 | M & L for racking out of joint/removing old any sealing compound,dirt form EXPANSION JOINTS 25mm wide (+3mm) and 40mm deep,cleaning the joint sides properly by mechanical means with diamond cutter ,filling the joints with closed cell ,medium density ,cross linked polyethylene foam backup rod of 32mm dia and applying bond breaker tape on top of backup rod for complete width of the joints,priming top with specified primer suitable for polysulfied based sealeant ,10mm thick including using masking tape on edges joints to avoid accidental spillage of esaleant on top surface of pavements complete all as specified and directed. |
| 5 | M & L for racking out of joint/removing old any sealing compound,dirt form dummy/contraction joints 6mm wide (+3mm) and 40mm deep,cleaning the joint sides properly by mechanical means with diamond cutter ,filling the joints with closed cell ,medium density ,cross linked polyethylene foam backup rod of 8mm dia and applying bond breaker tape on top of backup rod for complete width of the joints,priming top with specified primer suitable for polysulfied based sealeant ,10mm thick including using masking tape on edges joints to avoid accidental spillage of esaleant on top surface of pavements complete all as specified and directed. |
| 6 | M & L for making good crack/repair in concrete slabs (Exposed rigid pavement) by cutting to 40mm deep and cutting spilled joints sides perpendicular and parallel to edge by mechnical tools like diamond cutter,cleaning with compressed air under pressure and filling with Elastomeric concrete after application of specified primer all as per manufacturers insturction and specification copmlete and removal of rubbish to a distance exc 250M and n.exc 500m complete all as specified and directed |
| 7 | Demolition of Plain cenent concrete (PCC) including PQC of any description and in any other position not otherwise specoally provided for using pneumatic tools, removal of rubbish to a distance exc 250M and n.exc 500m complete all as specified and directed. |
| 8 | M & L for 400mm thick Pavement Quality Concrete (PQC) work in Pavement/Dispersal /Taxi link of minimum flextural strength 45 Kgs/Sqcm after 28 days of pavement slab using minimum 400 kgs Ordianary Portland Cement grade 43 per cum with not exc 31.5mm graded crushed stone aggregate confirming to IS:383 and mimed with non circular synthetic fiber reinforcement @ 0.25% of cement as per manufacturers insturctions ,spread,compacting using vibrator,finishing the surface by belting and brooming without using extra cement etc including necessary formwork etc complete all as specified and directed. |
| 9 | M & L for making good of joint by cutting concrete slab rectangular grooves of cross section of 10mm wide and 30mm deep and cutting spilled joint,sides peripendicular and paralleled to edges by mechnical tools like diamond cutter ,cleaning with compressed air under pressure and filling with Elastomeric concrete after application of specified primer and removal of rubbish to a distance exc 250M and n.exc 500M and depositing complete all as specified & directed. |
| 10 | M & L for semi perforated PVC pressure pipe of 6 Kgf/Sqcm,150mm dia,top 2/3 portion perforated and bottom 1/3 non-perforated including fittings like sockets,couplings,tees etc,laid in trences for repair of GEO Drain complete all as specified and directed. |
| 11 | M & L resurfacing of existing PQC slab of size 3.6m x 3.8mincluding making kerb,hauncing,bund etc complete all as specified & directed. |
| 12 | M & for grading & levelling side of service road including rolling and consoliding on existing surface by Tandem Vibratory roller complete all as specified and directed. |
| 13 | Repair of RCC drain : ( BOQ item no 13 to 17) (i) M&L for RCC M-25 Design mix (20mm graded aggregates) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all specified and directed. |
| 14 | (ii) M&L for RCC M-25 Design mix (20mm graded aggregates) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all specified and directed. |
| 15 | (iii) M & L for MS TMT 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 16 | (iv) M&L formwork to sides of concrete foundations, footings, bases of columns and similar work, rough finished flat surfaces all as specified and directed. |
| 17 | (v) M&L Formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter with fair finished flat surfaces all as specified and directed. |
| 18 | M & L bringing approved earth form out side of MOD land and depositing as directed. |
| 19 | M & L forming embankment including raising earth,spreading in layers n.exc 25cm thick,watering ramming/rolling with 8-10 ton power roller as specified & directed. |
| 20 | Repair of number sticker of DTGM board complete all as specified and directed. |
| 21 | Repair of signage boards complete all as specified and directed. |
| 22 | Repair of primary cable of signage board complete all as specified and directed. |
| 23 | Repair of integration with controlling system of 04 KVA rating specification complete all as specified and directed. |
| 24 | Repair of integration with controlling system of 25 KVA rating specification complete all as specified and directed. |
| 25 | Repair of MS sliding gate with motorised system complete all as specified and directed. |
| 26 | Cleaning & desilting of Mansoon drain of Runway,PTT including items specified in BOQ item no 27 to 31 complete all as specified and directed. |
| 27 | (i) Power roller -(1 Nos) 8 to 10 Ton, working 8 hours per day |
| 28 | (ii) Grader-01 Nos (For 8 working hour) |
| 29 | (iii) JCB-01 Nos (For 8 working hour) |
| 30 | (iv) Tipper-01 Nos (For 8 working hour) |
| 31 | (v) Tractor-01 Nos (For 8 working hour) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Today
Aug 18, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender