|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : REPAIRS MAINTENANCE TO COMPUND WALL,IRON GATE AND WICKET GATES,FENCING AND ALLIED WORKS AND REPAIR/MAINT OF CERTAIN BLDGS AND INSTALLATIONS AT HQTC. CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | COMMON ITEMS APPLICABLE FOR 'JOB A' & 'JOB B' |
| 3 | Dismantling structural steel work of any description and any position including doors, gate,fencing,framed trusses etc complete all as specified and directed. |
| 4 | S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed. |
| 5 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 6 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd complete all as specified and directed. |
| 7 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed. |
| 8 | S&F mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 5 to 10 mm dia and exc 5cm but n exc 10cm long complete all as specified & directed. |
| 9 | M&L for two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer including prepration of new/previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described |
| 10 | M&L Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour as specified complete all as specified and directed. |
| 11 | M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with grey cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 15 mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 13 | M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed. |
| 14 | ITEMS APPLICABLE FOR 'JOB A' |
| 15 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance as directed complete all as specified and directed. |
| 16 | M&L for Precast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc 10 cm in width and setting in mortar 1: 6 , complete complete all as specified and directed. |
| 17 | M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete all as specified and directed. |
| 18 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, including dismantling of stone masonry complete all as specified and directed. |
| 19 | M&L for flush pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 21 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick other then fair faces of brick work or concrete surfaces in cement mortar 1:6 , finished even and smooth with out using extra cement complete all as specified and directed. |
| 23 | M&L for rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for applying three coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces and applying 2 coats of cement paint over a coat of alkali resistant priming paint complete all as specified. |
| 26 | M&L for preparation of new surfaces and apply two coats of exterior emulsion paint (weather coat ) over a coat of approved primer complete all as specified and directed. |
| 27 | S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates,and chequerd plate etc. including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 28 | S&F in repair 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed. |
| 29 | Dismantling posts or struts (wood, steel or RCC) any section post embeded in concrete brick work,masonery etc including taking out embeded portion and making good disturbed ground,complete all as specified and directed. |
| 30 | S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. |
| 31 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 32 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed.(Note:- MS nut bolts, round bars and flats etc shall be measured and paid seperately under relavent items as supply only) |
| 33 | Supply only 4 mm dia GI Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 34 | S&F MS in flat ,round or square bars in available length confirming to Fe-410-W(Gde-E-250) including drilling holes notching for fixing nuts & bolts etc complete all as specified & directed, |
| 35 | Repair to existing chainlink fencing including strenthing, tighting, and binding with new or old fencing post/flat iron/nut bolt etc or necessary welding, complete all as specified and directed.(Note:fencing post/flat iron/nut bolt etc required as new item shall be measured and paid supply only) |
| 36 | M&L Preparation of old painted surface of any description not otherwise described steel and iron surface not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed. |
| 37 | M&L for preparation of old decorated plastered or unplastered surface of walls including scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete all as specified and directed. |
| 38 | All as per item No 35.00 here-in -before but two coats of white washing on walls complete all as specified and directed. |
| 39 | Complete removal of existing treatment including preparation of old surface and application of two coats of cement based over a coat of alkali resistant priming paint complete all as specified and directed. |
| 40 | M&L for preparation of old decorated surface of wall and applying one coat of cement based paint complete all as specified and directed. |
| 41 | Complete removal of existing treatment of walls including preparation of old surface and applying two coats of exterior emulsion paint (weather coat) over a coat of approved primer complete all as specified and directed. |
| 42 | M&L for preparation of existing treatment of walls and applying one coat of exterior emulsion paint (weather coat) complete all as specified and directed. |
| 43 | M&L preparation of old painted plastered surface of any description not otherwise described for road kerb stone, concrete , stone ,brick edging etc, surface over 10 cm width or girth and applying one coat of synthetic eanmel paint of any colour complete all as specified and directed. |
| 44 | M&L for one coat painting lines, strips, dashes, arrows, letters,etc. on roads, pavements and the like exc 10cm wide with road marking waterbase paint, white or golden yellow complete all as specified and directed. |
| 45 | M&L for cleaning the road surfaces of dirts, seals, oil grease, and foreign materials etc. and applying 2.5mm thick marking strips/lines, dashes, arrows, (retro reflective) of white or yellow colour using hot thermo plastic material by fully/ semi automatic thermoplastic paints applicator machine fitted with profile shoe glass beads dispenser, propane tank heater and profile shoe heater drive by operator on existing/ new road surfaces complete all as specified and directed. (glass beads shall not be less than 300 gms per sqm). |
| 46 | M&L for preparing of old chequered tiled and Paverblock surfaces/existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint or equivalent of any colour complete all as specified and directed. |
| 47 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 48 | M&L cement concrete 1:2:4, type B1(20mm graded stone aggregate) as in coping, kerb etc including necessary form work complete all as specified and directed. |
| 49 | M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified and directed. |
| 50 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) in fixing of fencing post fillings and mass concrete complete all as specified nd directed |
| 51 | M&L for providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5mm)graded aggregate) 50 mm thick (measured solid) including all mouldings but not excluding frame set in cement mortar 1:4 including dismantling existing louvres and jallies complete all as specified and directed. |
| 52 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 53 | Relaying of Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laying , and levelling and relaying the same tile complete all as specified and directed. |
| 54 | Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination complete all as specified and directed. |
| 55 | Demolition of reinforced cement concrete in ground floors (below or above ground level)l complete all as specified & directed. |
| 56 | Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc and getting out in hard/dense soil complete all as specified & directed. |
| 57 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation, fillings and mass concrete complete all as specified nd directed |
| 58 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 59 | Use and waste of form work to sides of pillars, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed. |
| 60 | Use and waste of form work to side and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels beam,tie beam, cantilevers, shelves including supports, overhangs, etc. also splays between floors and rough finished, complete all as specified and directed. |
| 61 | S&F TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 62 | Ditto,as Sl Item No 59.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 63 | M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 64 | M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 65 | M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers,tie beam,lintels over 1.5m span complete all as specified and directed. |
| 66 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 67 | Grubbing up tree trunk including cutting of trunk portion exc 30cm and not exc 100cm girth protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed. |
| 68 | Cutting of roots of girth exc 20 cm and making clear site for excuetion of work and removing of unserviceable material to a distance not exc. 50 m and clearing site complete all as specified and directed. |
| 69 | Removing excavated material (soil) not exc 50m and depositing where directed at a level not exc 1.50 m above the starting point complete all as specified and directed. |
| 70 | ITEMS APPLICABLE FOR 'JOB B' |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 72 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and directed. |
| 73 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile (300mmx 300mm), in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and directed. |
| 74 | M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick back coat in cement mortar 1:4 complete all as specified and directed. |
| 75 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile (400mm x 400 mm ) of size, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and directed. |
| 76 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 77 | M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in flooring, complete all as specified and directed. |
| 78 | M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed. |
| 79 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed. |
| 80 | M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified and directed. |
| 81 | M&L for Granite (of any type) tiles 18-20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of graniteand 20 mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 82 | M&L for rounding to edges of stone/granite slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 83 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed. |
| 84 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including suitable fittings of door shutter i.e.,incl 3 no - 100 mm hinges, 2 no - 150mm handle, 2 no - 150mm tower bolt, 1 no - 150mm sliding bolt complete all as specified and directed. |
| 85 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 86 | S&F 19mm thick plywood 7 ply with BWR type BB, fixed with adhesive and screws for top, bottom and sides of working table / shelves/ wall mounted shelves of any shape to required size, pattern/design, including necessary fixing to wall with necessary fixing bolts and accessories for wall mounting and floor bush for work stations complete all as specified and as directed. |
| 87 | S&F for 0.90mm thick decorative laminate type I of surface finish(colour & pattern as approved) fixed with approved adhesive as per manufacturers instruction finished to approved size for working tables/ shelves/ wall mounted shelves of any shape of any pattern and design etc complete all as specified and as directed. |
| 88 | S&F Cast brass powder coated automatic lock and release butt hinges of size 100mm complete all as specified and as directed. |
| 89 | S&F Cast brass powder coated Box type decorative door handle of size 75mm complete all as specified and as directed. |
| 90 | S&F lock and key(drawer/ cupboard) of size 32mm of make-Godrej model-\\"Curvo\\" or Techno-commercially equivalent in any other ISI marked makes as approved by GE complete all as specified and as directed. |
| 91 | S&F in repairs, fancy type CP 2 way bib cock with wall flanges complete all as specified and as directed. |
| 92 | S\&F in repairs fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 93 | S&F in repairs PVC connection 15mm size 450mmlong with CP PTMT nuts complete all as specified and as directed. |
| 94 | S&F in repairs 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial ply wood including provn for hanging clips complete all as specified and as directed. |
| 95 | S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 96 | S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 97 | S&F in repairs standard PVC waste pipe 32mm dia.,complete for WHB complete all as specified and as directed. |
| 98 | S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified and as directed. |
| 99 | S&F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 100 | S&F in repairs 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed. |
| 101 | S&F in repairs CP health faucet including one mtr length SS conncting pipe all as specified complete all as specified and as directed. |
| 102 | S&F in repair Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 103 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. including concrete bedding including making good to floor complete all as specified and as directed. |
| 104 | Dismantling for Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 105 | S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions and complete all as specified and as directed. |
| 106 | M&L for fibre cement ceiling board coloured textured designer 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as specified and as directed. |
| 107 | M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed. |
| 108 | S&F for 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 109 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads complete all as specified and as directed. |
| 110 | M&L for preparation of old plastered surface of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 111 | Dismantling water tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed. |
| 112 | Supply, hoisting, fixing in position and connecting 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layer,incl incoming and outgoing pipes,complete all specified and as directed Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
