|
| 1 | REPAIRS TO BED HARD TOP STEEL (FD/MAP/E6/08(R) |
| 2 | Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour oxide primer complete all as specified and as directed. |
| 3 | Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked along with 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg complete all as specified and as directed. |
| 4 | Removing the existing unserviceable shoe and supply and fix new PVC shoe in leg of Bed Hard as per existing pattern. complete all as specified and as directed. |
| 5 | Removing existing Head Board and foot rest of Bed hard steel and supply and fix of new Head Rest and foot rest complete all as specified and as directed. |
| 6 | REPAIRS TO CHAIR VERANDAH (FD-359) |
| 7 | Removing the existing unserviceable/ broken plastic cane from seat and back and supplying and canning with new plastic cream colour cane for seat and back complete all as specified and as directed. |
| 8 | Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified and as directed. |
| 9 | REPAIRS TO CHAIR VERANDAH (FD/MAP-II/06) |
| 10 | Supply and fix new PVC seat made of PPCP material 4mm thick of Chair Verandah MAP including taking down the old worn out /broken seat and back complete all as specified and as directed. |
| 11 | Supply and fix new PVC Back made of PPCP material 4mm thick of Chair Verandah MAP including taking down the old worn out /broken Back complete all as specified and as directed. |
| 12 | Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified and as directed. |
| 13 | CHARPOY HARD TOP (FD/MAP-II/01 ) |
| 14 | Removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightening of MS Pipes thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and as directed. |
| 15 | Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWP plywood conforming to IS: 710 top ISI marked alongwith countersunk screws bolted on the stiffeners 10 in Nos all as shown on Drg complete all as specified and as directed. |
| 16 | REPAIRS TO CHAIR WRITING OFFICERS (FD/E6/MAP/12) |
| 17 | Removing the existing unserviceable PVC arm rest and Supply and Fix in repairs new PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant complete all as specified and as directed. |
| 18 | Removing unserviceable Seat of chair writing and Supply and Fix new Seat 75mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardness duly covered with tapestry cloth not less than 250/- per RM complete all as specified and as directed. |
| 19 | Removing unserviceable back of chair writing and Supply and Fix new back 75 mm thick (PU) polyurethane foam moulded with density 50-55kg per cubic metre thick and hardness duly covered with tapestry cloth not less than 250/- per RM complete all as specified and as directed. |
| 20 | Removing unserviceable shoe of chair writing and supply and fix new shoe of chair complete all as specified and as directed. |
| 21 | Table Bed side (FD/E6/MAP/15R) |
| 22 | Removing the existing unserviceable handle of locker bedside & supply and fix new 100 mm long steel Handle complete all as specified and as directed. |
| 23 | Supplying and fixing in repair Telescopic channels powder coated in the drawers of the table bed side complete all as specified and as directed. |
| 24 | Preparation of old painted surface of conduit pipes No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat synthetic enamel paint by spray painting of black colour complete all as specified and as directed. |
| 25 | Removing unserviceable any side of table bedside and supplying and fixing new side of size 450mmx450mm 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be Chocolate/Mehogany/Wall nut chest shade to be approved by GE before bulk manufacture complete all as specified and as directed. |
| 26 | Removing unserviceable conduit pipe and supplying and fixing new 20mm dia conduit pipe of 1.6mm thick wall thickness as per existing complete all as specified and as directed. |
| 27 | TABLE COMPUTER (FD/E6/MAP/03) |
| 28 | Removing the existing top of table computer 900x600mm and supply and fix new top of same size 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade or as per existing complete all as specified and as directed. |
| 29 | Removing the existing any kind of unserviceable Particle/MDF Board Shelf and supply and fix new shelf of size 450x300mm made out of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade or as per existing complete all as specified and as directed. |
| 30 | Removing unserviceable existing keyboard tray of table computer and Supply and Fix new key board tray of size 480mmx300mm duly 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade or as per existing and one set of telescopic channel of size 300mm as per drg complete all as specified and as directed. |
| 31 | Removing unserviceable drawers of table computer and Table composite and supply and fix new drawer of size made out of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade or as per existing complete all as specified and as directed as following:-(a) Front of size 230x130mm(b) Sides of size 300mmx90mm (c) Powder coated Telescopic channels two in nos 300mm long(d) Bottom size of 300mmx175(d) Drawer End of size 140mm x 90mm |
| 32 | M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of table computer by gas welding wherever required complete all as specified and as directed. |
| 33 | Teapoy verandah (FD/E6/MAP/17) |
| 34 | Removing the existing unserviceable top & supply & fix 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge size 450mmx450mm with 2 mm thick PVC edging all round complete all as specified and as directed. |
| 35 | Preparing old painted steel surfaces of frame & apply one coat of black synthetic enamel paint including removing the unserviceable rubber shoes and supply and fixing new of same size rubber shoes complete all as specified and as directed. |
| 36 | REPAIR TO SIDE BOARD FD-1112 |
| 37 | Removing the existing unserviceable/ broken shutter of side board and supply and fix new shutter of size 400x650mm made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak fixed with 40 mm wide chromium plated continuous piano hinges including CP handle, 100 mm long,01 Nos knob and magnetic catcher to stick the doors. Edges of the Shutters to be covered PVC beading 2mm thick machine pressed all around, complete all as specified and as directed. |
| 38 | Removing the unserviceable broken back ply of side board and supply and fixing new 6 mm thick BWP grade plywood conforming to IS: 710 complete all as specified and as directed. |
| 39 | Removing the unserviceable/ broken drawers of side board and supply and fixing new drawers made of front 18 mm thick prelaminated MDF Board exterior Grade as per existing shade both one side laminated and other side white balancing paper rest all the sides bottom etc to be made out of 12mm thick PLMDF Board exterior grade,also fixing of 40 mm knob of matching colour as per shade of Board, alongwith one set of telescopic channel complete all as specified and as directed. |
| 40 | Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as specified and as directed. |
| 41 | REPAIR TO CHAIR EASY (FD 229) |
| 42 | Removing the existing unsv/broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and as directed.( Note : Each leg shall be measured separately). |
| 43 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and shown on drgs (Note : Each leg shall be measured separately). |
| 44 | Removing the existing unserviceable/ broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and as directed.(Note : Each arms shall be rest measured separately). |
| 45 | Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane complete all as specified and as directed. |
| 46 | Supply and fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 47 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 48 | REPAIR TO CHAIR DINNING (FD- 279) |
| 49 | Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and as directed.(Note : Each leg shall be measured separately) |
| 50 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed.(Note :Each leg shall be measured separately). |
| 51 | Removal of unserviceable back rest batten and supply and fix new back rest batten made out of 1st class hard wood teak of size as per drg complete all as specified and as directed. |
| 52 | Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair complete as per drg complete all as specified and as directed. |
| 53 | Supply & fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 54 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 55 | REPAIR TO CHAIR WRITING (FD- 280) |
| 56 | Removing the existing unserviceable/ broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and as directed.(Note : Each leg shall be measured separately) |
| 57 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed.(Note : Each leg shall be measured separately) |
| 58 | Removing the existing unserviceable/broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and as directed.(Note : Each arm shall be rest measured separately) |
| 59 | Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair complete as per drg complete all as specified and as directed. |
| 60 | Supply and fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 61 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 62 | REAPIR TO CHAIR DINNING WITH PVC SEAT (FD/MAP-II/05) |
| 63 | Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard teak wood rear leg complete all as specified and as directed. (Note : Each leg shall be measured separately) |
| 64 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed. (Note : Each leg shall be measured separately). |
| 65 | Removing the existing unserviceable/ broken PVC Seat of Chair Dining and supply and fix new PVC Seat complete all as specified and as directed. |
| 66 | Removal of unserviceable back rest batten and supply and fix new back rest batten made out of 1st class hard wood teak of size as per drg complete all as specified and as directed. |
| 67 | Supply and fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak under the seat irrespective of what shown on drgs complete all as specified and as directed. |
| 68 | Supply and fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 69 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 70 | REPAIR TO CHAIR DINNING CUSHIONED/LONG BACK (FD/MAP-II/04)(FD/E6/MAP/10R |
| 71 | Removing the existing worn out seat cushion and supply and fix new PU foam seat foam of size 450X450X75mm thick, density 50-55 Kg/cum with 12 mm thick plywood BWP grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and as directed. |
| 72 | Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard teak wood rear leg complete all as specified and as directed. (Note : Each leg shall be measured separately) |
| 73 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed. (Note : Each leg shall be measured separately). |
| 74 | Preparation of surfaces and french polishing to wooden surfaces for repaired chairs and applying two or more coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 75 | REPAIRS TO SOFA SET 1/3/4/5 SEATER SEAT (FD-281) |
| 76 | Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100 mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as specified and as directed. Note: (The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM). |
| 77 | Replacement of cover of tapestry cloth of cushion of sofa and supply & fix new cover of tapestry cloth on existing foam cushion with Velcro on one edge of best quality. Shade and texture to be Jute pattern and colour to be got approved before bulk stiching complete all as specified and as directed. Note : The cost of tapestry cloth shall not be less than Rs 350/- per meter. |
| 78 | Removing unserviceable long rail of seat or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood teak of size 1590x100x35mm duly french polished complete all as specified and as directed. |
| 79 | Removing unserviceable short rail of any side of sofa set 4/5 seater and supply and fix new short rail made out of first class Hard Wood teak of size 525x100x35mm duly french polished complete all as specified and as directed. |
| 80 | Removing unserviceable wooden bearer of any side of sofa set 4/5 seater and supply and fix new wooden bearer made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as specified and as directed. |
| 81 | Removing unsv wooden Arm of any side of sofa set 4/5 seater and supply and fix new wooden Arm made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as specified and as directed. |
| 82 | Material and labour for smoothening surface with sand paper of Sofa set five seater for repolishing the old polished surface or unpolished surface including bottom of sofa with one coat of french polish both above and below the sofa complete all as specified and as directed. |
| 83 | Material and labour for smoothening surface with sand paper of Sofa set four seater for repolishing the old polished surface including bottom with one coat of french polish complete all as specified and as directed. |
| 84 | REPAIR TO TABLE DINING 4/6 PERSON (FD/MAP-II/03) |
| 85 | Removing the existing unserviceable/ broken top of Table dining 4 person and supply and fix new top of 1200x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine complete all as specified and as directed. |
| 86 | Removing the existing unserviceable/ broken top of Table dining 6 person and supply and fix new top of 1500x900mmx18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed. |
| 87 | Removing the existing unserviceable/ broken top long rail of Table dining 4 person and supply and fix new long rail made of 1st class hard wood teak of size as shown on drawingcomplete all as specified and as directed. |
| 88 | Removing the existing unserviceable/broken top short rail of Table dining 4 person and supply and fix new short rail made of 1st class hard wood teak of size as shown on drawing complete all as specified and as directed. |
| 89 | Removing the existing unserviceable/ broken leg of Table dining 4 person and supply and fix new leg made of 1st class hard wood teak complete all as specified and as directed. |
| 90 | Preparation of Wooden surface and applying French polishing to Table dining 4/6 persons except laminated portion complete all as specified and as directed. |
| 91 | REPAIR TO TABLE DRESSING LADIES (FD/MAP-II/07) |
| 92 | Removing the existing unserviceable/ broken drawers of Table dressing ladies and supply and fix new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWP grade plywood duly fixed with aluminium anodised knobs 40 mm complete all as specified and as directed. |
| 93 | Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing ladies and supply and fix new mirror minimum 5 mm thick suitable for the existing frame alongwith 6mm thick BWPgrade plywood back all as per existing and shown on drg complete all as specified and as directed. |
| 94 | Removing the existing unsv/broken anysides of Table Dressing ladies and supply and fix in repair new sides made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed. |
| 95 | Replacement of existing foam cushion of Stool dressing cushion seat including existing tapestry cloth of Stool dressing cushion seat, and supply & fix new PU Moulded Foam 50-55 kg per cubic meter density of size 400 x 330 x 80mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as specified and as directed. (FD/E6/MAP/14). Note: (Tapestry cloth shall not be less than Rs. 350.00 Per RM). |
| 96 | Preparation of old surface and French polishing to Table dressing ladies except laminated portion complete all as specified and as directed. |
| 97 | REPAIR TO TABLE BED SIDE ( FD-276) |
| 98 | Removal unserviceable plywood at back of table bed side and supply and fix plywood 6mm thick BWP Gde as per IS:710 complete all as specified and as directed. |
| 99 | Removal of unserviceable any part and supply and fix new part made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed. |
| 100 | Material and labour for french polishing of complete table exposed to view except laminated portion per drawing complete all as specified and as directed. |
| 101 | REPAIR TO TABLE WRITING (FD-275) |
| 102 | Removal of unserviceable leg and supply and fix new leg made out of 1st class hard teak wood as per drawing and complete all as specified and as directed. |
| 103 | Removal of unserviceable knob/handle of drawer from front shutter of cabinet and supply and fix new aluminium anodised knob/ handle heavy duty of quality as per sample available as per drawing and complete all as specified and as directed. |
| 104 | Removal of unserviceable side of cabinet of table and supply and fix new side of cabinet including shutter and lock made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed. |
| 105 | Removal of unserviceable top and supply and fix new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete all as specified and as directed. |
| 106 | Removal of unserviceable drawer and supply and fix new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWP Gde)plywood at the bottom of drawer over one set of powder coated telescopic channels to move the drawers all as per drawing and complete all as specified and as directed. |
| 107 | M&L for french polishing of complete table exposed to view except laminated portion complete all as specified and as directed. |
| 108 | REPAIR TO TABLE CENTRE (FD-274) |
| 109 | Removing the existing unserviceable table centre top and supply and fix new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 110 | REPAIR TO PEG TABLE (FD-384) |
| 111 | Removing the existing unserviceable peg Table top and supply and fix new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shadecomplete all as specified and as directed. |
| 112 | REPAIR TO TEAPOY (FD-382) |
| 113 | Removing the existing unserviceable Teapoy Top and supply and fix new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 114 | REPAIRS TO HAT STAND WITH MIRROR FD-361 |
| 115 | Removing unserviceable Veeneerply from Hat stand and supply and fix new Veneerply teakshade of size 1000x700mm of BWP Grade complete all as specified and as directed. |
| 116 | Removing unserviceable mirror and supply and fix new mirror of size 440x300mm conforming to IS 2553(Part 1) 2018 complete all as specified and as directed. |
| 117 | Removing unserviceable pegs and supply and fix new pegs made of brass for hanging Hat complete all as specified and as directed. |
| 118 | Removing existing unserviceable beading and supply and fix new beading all around the Hat as shown in drawing complete all as specified and as directed. |
| 119 | Material and labour for smoothening surfaces with sand paper of Hat stand and polishing the old polished surface with two coats of french polish complete all as specified and as directed. |
| 120 | REPAIRS TO DRESSING MIRROR GENTS FD/E6/MAP/16 |
| 121 | Removing unserviceable 12 mm plywood from Dressing mirror Gents and supply and fix new ply of size 1200x600mm of BWP Grade complete all as specified and as directed. |
| 122 | Removing unserviceable prelaminated particle board and supply and fix of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed. |
| 123 | Removing unserviceable magnets and supply and fix new magnets complete all as specified and as directed. Please Enable Macros to View BoQ information |
