|
| 1 | Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc as directed by Engr-in-Charge. |
| 2 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided , including removal of debries to Outside MD Land , complete all as specified and as directed. |
| 3 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.. |
| 4 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including removal of debries to Outside MD Land , complete all as specified and as directed . |
| 6 | M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge. |
| 7 | Extra forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tried/ stopped ends etc. complete all as specified and as directed. |
| 8 | M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings as directed |
| 9 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 10 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, Beams, cover slabs, in pre cast works, etc, by hooking ends and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 11 | M&L for providing pre cast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for landing, cover slabs (for man holes etc ), shelves and similar work including dismantling of old cover slab of any description all as specified and directed. |
| 12 | M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate for as in sub base complete all as specified and directed. |
| 13 | M&L for Providing and laying 60mm thick factory made Rubber moulded chamfered edge cement concrete coloured paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 14 | M&L 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate for flooring, Hardstanding, Pavings surface finished fair and even complete all as specified and directed. |
| 15 | M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in sub-floors/sub base all as specified and directed by Engr-in-Charge. |
| 16 | M&L for Rubber moulded Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed in cement mortar 1:6, including demolition of old tiles all as specified and directed by Engr-in-Charge. |
| 17 | S&F Stainless steel letters SS (304 Grade) in repairs of any description over wall/ wall Granite slab / ACP Panel size 100mm to 150mm, including fixing with screws/adhesive and filling of hollow portion , etc., and removing of existing old letters, complete all as specified and directed. |
| 18 | S&F Stainless steel letters SS (304 Grade) in repairs of any description over wall/ wall Granite slab / ACP Panel size 150mm to 300mm, including fixing with screws/adhesive and filling of hollow portion, etc., and removing of existing old letters, complete all as specified and directed. |
| 19 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 20 | M & L for 20 mm thick, Machine cut polished kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting rubbing and polishing to give mirror finished polished surface etc completed all as specified. |
| 21 | M & L for 20 mm thick polished Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified. |
| 22 | M&L for preparation and painting of lines, dashes, arrows and letters etc on old painted concrete / Bituman surfaces of n exceeding 10 cm width with road marking paint with one coat of Aqua Water based (any colour) (proportion as per manufacturer's instruction), marking edges of paint straight in line by road marking machinery all as specified and as directed by the Engineer-in-charge. |
| 23 | M&L for Preparation and painting of lines, dashes, arrows and letters etc on old painted concrete / Bitumen surfaces exceeding 10 cm width with road marking paint with one coat of oil-based any colour marking edges of paint straight in line by manually/road marking machinery, all as specified and as directed by the Engineer-in-charge. |
| 24 | M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying two coat of cement base paint including filling cracks/undulated surfaces with wall care putty wherever required complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed |
| 26 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 27 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directionsof Engineer-in-Chief. |
| 28 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. |
| 29 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed. |
| 30 | S & F sheet glass of 5.50mm thick selected quality in square and exceding 0.5 Sqm in each pane. |
| 31 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 32 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 34 | M&L for PCC 1:3:6 type C2, using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed |
| 35 | S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 36 | S&F plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410(Gde-250) |
| 37 | Supply only mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed at other fitted with washer and nut 11 to 15 mm dia and , length of bolt exc 15cm and n exc 22.5cm long complete all as specified and directed. |
| 38 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 39 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws as specified. |
| 40 | M/L PCC 1:2:4, type B2 (40 mm graded agg) for 100 mm thick path/ flooring without using extra cement all as directed. |
| 41 | M&L for Forming construction (dummy) joints 65 mmx10 mm wide filled with sealing compound grade A. all as specified and directed. |
| 42 | M&L for plastering in internal wall surfaces of 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 43 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and directed. |
| 44 | M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engr -in- charge. |
| 45 | M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge. |
| 46 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
