|
| 1 | M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil complete all as specified and directed. |
| 2 | M&L for Plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed. |
| 3 | Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed |
| 4 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and directed. |
| 6 | M&L Providing precast cement concrete louvres and jallies,35mm thick (measured solid), including all .mouldings but excluding frame .Type B0 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 8 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 9 | M&L for RCC M30 using 20mm graded aggregate as in pillers piers posts and struts etc. complete all as specified and directed. |
| 10 | M&L for form work to sides of footing and plinth beams finished fair and rough complete all as specified and directed. |
| 11 | M&L for form work to the sides of columns etc complete all as specified and directed. |
| 12 | M&L for RCC M30 using 20mm graded aggregate as in footings fdn beams etc complete all as specified and directed. |
| 13 | M & L for 10mm dia and over TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm complete all as specified and directed. |
| 14 | M & L for 5mm dia and over upto and incl 10 mm dia in stirrrups, spacers and binders TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm complete all as specified and directed. |
| 15 | M&L for PCC Coping 1:2:4 type B0 using 12.50mm graded stone aggregate complete all as specified and directed. |
| 16 | M/L MS Framed work as in door or gates of angle Iron or other section with guessts plate rails brace etc complete confirming to Fe 410 W Gde E all as spd.Angle Iron frame bar two leafs |
| 17 | M & L painting two coats of synthetic enamel paint over a oat of red oxide on steel surface |
| 18 | M & L for providing RCC 1:2:4, type B0 using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, parapets and railing upto 60 cm in height, copings, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for Formwork to sides and soffits of floor or lintel beams, haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. incl flat fair furnished surfaces |
| 20 | M&L for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but n exc 10cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work incl flat fair finished surfaces |
| 21 | Supplying and laying of 75mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. Please Enable Macros to View BoQ information |
