Tender For Lining Of Watercourse Of O/L Rd 121726-L Of Banga Disty. By Laying Of Ugpl Of Vill. Sangatpur/ Pandori, Distt. Kapurthala
Tender Overview
Project Description
Tender for Lining Of Watercourse Of O/L Rd 121726-L Of Banga Disty. By Laying Of Ugpl Of Vill. Sangatpur/ Pandori, Distt. Kapurthala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jun-2026 | Corrigendum10 | Date | 15-Jun-2026 |
| 2 | 26-Jun-2026 | Corrigendum12 | Date | 15-Jul-2026 |
| 3 | 15-Jun-2026 | Corrigendum08 | Date | 26-Jun-2026 |
| 4 | 15-Jun-2026 | Corrigendum08 | Date | 26-Jun-2026 |
| 5 | 15-Jul-2026 | Corrigendum13 | Date | 03-Aug-2026 |
| 6 | 03-Aug-2026 | Corrigendum14 | Date | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Lining of Water course of RD 121726-L |
| 2 | Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc. |
| 3 | Depth upto 1.5 mtr. |
| 4 | Depth upto 1.5 to 2.25mtr. |
| 5 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 6 | First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement. |
| 7 | 10mm thick cement plaster 1.4 on sides walls. |
| 8 | 10mm thick cement plaster 1:4 on bed and top. |
| 9 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement. |
| 10 | Cement Concrete 1:2:4 including supply, carriage & with stone ballast or shingle. |
| 11 | Cement concrete 1:4:8 with brick ballast 40mm gauge. |
| 12 | Lowering, jointing and cutting of UPVC pipes 250 mm dia laying same to correct gradient and alignment and jointing ends and fixing complete in all respect including cost of carriage,loading and unloading |
| 13 | Providing and fixing of G.I pipe 50 mm for air vent valve complete in all respect to the specification of engineer in charge |
| 14 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank. |
| 15 | Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 |
| 16 | Providing and fixing of Alfa Alfa Valve 250 mm dia. fitted on riser pipe to act as Nakka (D regulators) |
| 17 | Centreing &shuttering for Concerte faces |
| 18 | Providing & Fixing of Steel Shutter Gate Assembly 250 mm dia. in Main Pipeline complete in all respect |
| 19 | Dismantling of Brick work in Cement |
| 20 | Providing and fixing Elbow/bends of 90 degree 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (250 mm) |
| 21 | Providing and fixing Elbow/bends of 45 degree 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (250 mm) |
| 22 | Providing and fixing equal Tee of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (250 mm) |
| 23 | Providing and fixing MS service Sadle of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge with flench (250 mm) |
| 24 | Providing and fixing Tail end piece 250 mm of 4 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge |
| 25 | Providing and fixing air valve complete |
| 26 | Any other item Misc. item |
| 27 | Any other item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 18 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender