|
| 1 | Schedule-A |
| 2 | Taking down chowkhat or frames with shutters of any description (without taking off shutters from the frame) n.exc. 1.5 Sqm each all as specified and as directed. |
| 3 | All as per above item no 1, but exceeding 1.50 sqm each and n.exc. 4 Sqm each |
| 4 | Taking down shutters only of any description exc 1 Sqm and n.exc. 2 Sqm each |
| 5 | Taking down shutters only of any description n.exc 1 Sqm |
| 6 | S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (g) Door Floor spring ISI Marked(h) Six lever mortice lock brass on in each door.(j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick. |
| 7 | S&F aluminium colour powder coated door shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:-(a) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (b) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (c) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (d) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (e) Six lever mortice lock brass on in each door.(f) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (g) Tinted glass/Plain glass(Colour) 5mm thick. |
| 8 | S&F for 12mm thick Seamless toughen glass panel (single panel) with fixing decorative Air Force/Unit logo on glass panel doors as required , including Stainless Steel Brackets,fastner, rubber gusket or packing material all around the panel for fixing with wall or framed work as required and making good surfaces complete all as specified and as directed by EIC. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 9 | S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd(b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per spd.(e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd.(f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with \\"H\\" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment. |
| 10 | S&F aluminium coloured power coated Side Hung window/ventilator Shutter with section comprising the following:- (a) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (b) Aluminium coloured power coated butt hinges 3 Nos in each window 100 mm sizes as per spd. (c) Aluminium coloured power coated tower bolt 2 Nos in each window 150 mm long as per spd.(d) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd.(e) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. |
| 11 | Taking down and Re-fixing in the same opening aluminium powder coated door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing ,alum hings ,cleats glazing clips, rubber packing, anodised aluminium snap beading screws,double action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium Alloy sheet foundation Box, Main Body with stainless steel cover, outer ring pivot made of brass, Door closer ,cementing works etc complete all as specified. |
| 12 | Taking down and Re-fixing in the same opening 12mm thick Seamless toughen glass panel (single panel) with fixing decorative Air Force/Unit logo on glass panel doors as required , including Stainless Steel Brackets,fastner, rubber gusket or packing material all around the panel for fixing with wall or framed work as required and making good surfaces complete all as specified and as directed by EIC. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 13 | S&F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete. |
| 14 | S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
| 15 | S&F in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed. |
| 16 | S&F solid PVC board 18/19 mm exterior grade HDMR board as in Modular Kitchen cupboard/ Almirah conforming to BWP grade with density not less than700-750 Kg/M3,Finished with 1.0 mm thick laminate mica on external & internal surface kitchen cabinet etc. , complete all as specified and directed. |
| 17 | S&F in repairs 18/19 mm thick prelaminated partical board exterior gde prelaminated one side with decorative choice and other side white lamination fixing with screws as in cup board shutter & shelves and , complete all as specified and directed. |
| 18 | S & F 75 to 80 mm long stainless steel handle complete all specified. |
| 19 | S&F continuous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm, complete all as specified and directed.Note :- Net area of front finished surface will be measured. |
| 22 | S&F factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels. |
| 23 | M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces. |
| 24 | S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed by Engr-in-charge |
| 25 | S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted as per Specifications and Draw-ings, complete all as specified and as directed. |
| 26 | Factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege |
| 27 | Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) |
| 28 | S & F in repair rubber beading to be fixed over glass panes in Aluminum windows complete all as directed. |
| 29 | S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and as directed. |
| 30 | Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc. |
| 31 | Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed. |
| 32 | S&F 4.0mm thick sheet glass plain pane best quality fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed. |
| 33 | S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed. Please Enable Macros to View BoQ information |
| 34 | S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed. Please Enable Macros to View BoQ information |
