|
| 1 | Clearing Jungle including uprooting of trunk vegetations grass, bush, wood trees and saplings of girth upto 30 cm. measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres out side the periphery of area cleared as per S.I. No. 259 |
| 2 | Racking out joints of brick work in cement or lime mortar to a depth of 1 cm including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 mts S.I No-707 |
| 3 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. |
| 4 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 Coarse sand): Flush/ Ruled/ Struck or weathered pointing 13.32.1 |
| 5 | Removal of defective concrete, cleaning the surface thoroughly, applying the shotcrete mixture mechanically with compressed air under pressure, comprising of cement, sand, coarse aggregates, water and quick setting compound in the proportion as per clause 2807.1., sand and coarse aggregates conforming to IS: 383 and table 1 of IS: 9012 respectively, water cement ratio ranging from 0.35 to 0.50, density of gunite not less than 2000 kg/cum, strength not less than 25 Mpa and workmanship conforming to clause 2807.6. |
| 6 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.as per morth specification no 305 |
| 7 | Plain Cement Concrete Grade M20 in Open Fondation complete as per Drawing and Technical Specifications. |
| 8 | Providing and laying Filter material underneath pitching in slopes |
| 9 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment. |
| 10 | Supplying and installation of delineators (road way indicators, hazard markers, object marker) 80-10cm, high above ground level, painted black and white in 15cm, wide strips, fitted with 80x100 mm rectangular or 75 dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019 |
| 11 | Painting or vansishing on iron worksin small areas or new wood work with one cost of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work paint to be used should confirm to the I.S.I No. 103 1950. but for every coat on previously painted old wood or steel work.(As per SOR No. 643) Two coat Please Enable Macros to View BoQ information |
