|
| 1 | Projection Mapping/Dynamic Facade Lighting with Operation and Maintenance at Gorakhgiri Parvat, District Mahoba (U.P.) |
| 2 | General Note: Applicable to all Items |
| 3 | All equipment supplied, installed and workmanship of the work done shall be covered under Warranty for 5 years from the date of completion of the work. The defects, if any, noticed during the defect liability period shall be rectified with no extra cost , failing which the successful bidder shall be liable for action by the Authority/Client Department/ UPPCL. The Warranty against Manufacturing defects against 5 years for LEDs, projection systems, audio-visual equipment, and all related accessories, as well as regular cleaning, calibration, and replacement of defective parts. The O&M scope shall also cover the design, development, and maintenance of the entire Proejction System. Regular software updates, bug fixes, database management, and UI/UX improvements will be carried out to ensure smooth functionality and compatibility with the latest OS platforms. SITC of DLP LASER Phosphor Multimedia Projection system having, minimum 23500 Lumens 20000 hours illumination life, 1920 x 1200 WUXGA Native Resolution, 4000000:1 Contrast Ratio, inputs: HDBaseT,motorised focus and zoom,HDMI, DVI-D, 3D at 120Hz along with projector mountin bracket etc complete with lens as per site with vertical and horizontal offset and installation as per the site requirement. Supplied With long throw lens, The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based. |
| 4 | Supply of weatherised enclosers for equipment. Equipment should be complete with fans & temperature and humidity sensors remote controlled with all accessories.Enslosure should also have built in airconditioner for maintaining ambient temperature and humidity inside enclosure with Warranty for 5 years. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct/Engineer in charge. |
| 5 | Supply of Production Media Server- Intel Core i9 Series Processor or above with following minimum specifications, 16 GB RAM system memory, Minimum 1TB SSD storage, Dedicated 8 GB Graphic card (NVIDIA/AMD), Wireless key board, Wireless mouse with licensed loaded Window 10/11, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc. |
| 6 | Supply of Display Media Server- Intel Core i9 Series Processor or above with following minimum specifications, 16 GB RAM system memory, Minimum 1TB SSD storage, Dedicated 8 GB Graphic card (NVIDIA/AMD), with licensed loaded Window 10/11, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc.with Warranty for 5 years. |
| 7 | Supply of 3D Projection mapping software and for UI/UX Integration, Playback control System to manage, schedule & control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software to complete the job with all respects with Warranty for 5 years. |
| 8 | Content Generation, Designing, Storyboarding, Historian, Voice Over, Project Conservationist onboarding, Direction and Graphics, ArtisticDirection, research, script, translation, dramatization, Visualizing the content, creating 2D,3D animation, CGI, video shoot including artist, laser animation,Art component (if any) as per theme approved by Architect in charge. The cost is inlcusive of creation of content in 2 languages and minimum 2 options for the script to be submitted to the Architectural Consultant for their approval/Project Manager. |
| 9 | The content should be supported by sound design and voiceover in 2 languages. Audio files and voiceover in the local language with required sound design converted to suit the speaker/headset hardware of suitable duration which will be played on loop. The content to be developed as per the defined theme by the Architectural Consultant/Project Manager showcasing the history of Gorakhnath Baba and relation of Mahoba. The output to be planned as per the directional speakers. Programming and integration of show with content,effect complete etc.as reqd.The cost is inclusive of creation of entire video walkthorugh of the program (minimum 2 options) and gettingit approved by the Architect in charge based onthe theme and idea communicated to the Bidder. The work includes collection of required information & relevant data, human resouce alignment etc., development of content for illumination show in consultation with client and making changes as per the observations / requirements. Content duration will be for 15-20mins max. Supply, tesitng and commissioning of 6-10m height pole made made in combination of mild steel pipe sections 114mm dia. & 76mm dia. with suitable fixing arrangement to mount Laser projector. The pole to be provided with a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation.After Fabrication, Entire Pole is hot dip galvanized(100 microns Minimum ) for the effective corrosion resistance. The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 16A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating (coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge/Project Manager |
| 10 | 20 KVA UPS with 30 minutes power backup, along with Electrical cabling and Earthing with Warranty for 5 years. |
| 11 | Cables, Accessories, Fibre Optic Extenders, Electrical Panels, Container for control room, equipment racks, Control room AC, Control room table, Electrical cabling etc. with Warranty for 5 years. |
| 12 | Audio System |
| 13 | Supply of Loudspeakers with Drivers 2x 12\\" LF / 1 x 1,4\\" HF Coaxial , Frequency range 65 - 18K Hz; Power capacity programm / peak:1400/2400W bi-amplified LF; 220/400W biamped HF; 1400/2400W passsive; , Impedance- 4 Ohm bi-amped LF, 8 ohm biamped HF; 4Ohm passive , Coverage range (h x v) 60° x 40°/90° x 50°, rotatable HF-Horn; Sensitivity 1 W / 1 m - 107 dB biamped LF, 112db biamped HF; 110db Passive ,SPLmax / 1 m / peak 143 dB, with Polyurea coating for outdoor installs IP54. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge. OR S.I.T.C of Dual 12\\" waterproof Line Array System type Two way dual 12\\" Weatherproof Line Array Speaker System HF driver Dual 3\\" Neo compression driver LF driver Dual 12\\" woofer Frequency response (-3dB) LF: 50Hz-4kHz, HF: 900Hz-16kHz Sensitivity (1W@1m) LF:102dB, HF:110dB Max SPL(1m) LF: 126dB/132dB(Peak), HF: 130dB/136dB(Peak) Power LF: 500W HF: 100W (RMS) LF: 1000W HF: 200W (MUSIC) LF: 2000W HF: 400W (PACK) Rated impedance LF: 8 Ohms HF: 8 Ohms Connector NL4×2 @ LF:1+ 2- HF: 3+ 4- OR Supply, installation, testing and commissioning of a 3-way, Dual 11.25\\" D'Apolito Loaded High Energy Horn Loaded Speaker System. The speaker shall meet the following performance criteria: Serviceable frequency range of 63 HZ - 20 kHZ (-10 dB) or better and a frequency response of 57 HZ - 20 kHZ (-3dB) or better.For HF mode, the rated power which the speaker should be able to utilize for long periods of time shall be atleast 100 W while rated power which the speaker should be able to handle in short bursts shall be atleast 400 W. In MF Mode, rated power which the speaker should be able to utilize for long periods of time shall be atleast 250 W while rated power which the speaker should be able to handle in short bursts shall be atleast 1000 W. In LF Mode, rated power which the speaker should be able to utilize for long periods of time shall be atleast 550 W while rated power which the speaker should be able to handle in short bursts shall be atleast 2200 W. In Standard mode, horizontal dispersion pattern of 70º or better while vertical dispersion of the array shall be 40º or better. In Wide Mode, horizontal dispersion pattern of 90º or better while vertical dispersion of the array shall be 50º or better. In Standard mode, the maximum decibel (dB) level which the speaker should be able to deliver without distortion be atleast 143 dB. In Wide Mode, the maximum decibel (dB) level which the speaker should be able to deliver without distortion be atleast 142 dB. In HF mode, Sensitivity should be 114 dB or a cut above.In MF mode, Sensitivity should be 107 dB or a cut above. In MF mode, Sensitivity should be 106 dB or a cut above. In HF/MF/LF mode, the nominal impedance should be 8 ohms.The crossover frequency of the speaker should be 200Hz, 2 kHz (Active). For LF, there shall be 2 x 11.25” ferite transducers -3.5” vc or better. For MF, there shall be 1X3\\" Ferrite Transducers - 3\\" VC or better. The aesthetics should comprise of a Marine Birchwood Cabinet(premium grade) enclosure, Perforated Stainless Steel Grill backed by acoustically transparent foam over a stainless steel mesh with Slide Bolt Locking System with Fly Adapters for Underhangs mounting system or better |
| 14 | Supply of Subwoofer with Drivers 1x 18\\" LF; Frequency range 32 - 160 Hz, Power capacity-programm / peak: 2400 / 4800 W; Impedance - 8Ohm, Sensitivity 1 W / 1 m - 96dB Passive; SPLmax / 1 m/ peak 132dB, with Polyurea coating for outdoor installs IP54.The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge OR Dual 18\\" waterproof subwooferSystem Dual 18Woofer 2x18Frequency response(-3dB) 35Hz-500HzSensitivity(1W@1m) 102dBMax.SPL(1m) 127dB/133dB (Peak)Power 1000W (RMS) 2000W (MUSIC) 4000W (PEAK )Rated impedance 4 OhmsCabinet Birch plywood OR Supply, installation, testing and commissioning of a 21” Horn Loaded Sub for an Extended LF Response. The speaker shall meet the following performance criteria: Serviceable frequency range of 19 HZ - 200 HZ (-10 dB) or better and a frequency response of 22 HZ - 140 HZ (-3dB) or better. The rated power which the speaker should be able to utilize for long periods of time shall be atleast 2000 W while rated power which the speaker should be able to handle in short bursts shall be atleast 8000 W. The coverage pattern should be omni-directional. The maximum decibel (dB) level which the speaker should be able to deliver without distortion be atleast 137 dB. Sensitivity should be 98 dB or a cut above. The nominal impedance should be 4 ohms. For LF, there shall be 21\\" Long Excursion ADR Drivers, 5.3\\" VC - Neo or better. The aesthetics should comprise of a Marine Birchwood Cabinet(premium grade) enclosure, Perforated Stainless Steel Grill backed by acoustically transparent foam over a stainless steel mesh with Integrated Handles - M-10 insertion points mounting system or better. |
| 15 | Supply of Four Channel amplifier with inbuilt DSP, 1800W @2ohm , 2400W @4 ohm; 1600W @8ohm ; 3600W @4Ohm and 4800W@8Ohm in bridge mode; Maximum output voltage 175Vpeak and 55Apeak current; Frequency Response 20Hz-20KHz;S/N Ratio- 104dBA; Crosstalk >70dB@1Khz;THD+N < 0.1%; Slew Rate-50V/microSec; Damping Factor >500@ 20-100Hz; A/D and D/A Converters of 24bit/48KHz; DSP Inbuilt Preset Memory; Crossover Filters - linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR);Input Equalizers - Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass; Output Equalizer ; Limiters - P TruePower™, RMS voltage, RMS current, Peak limiter; Audio signal input 1 Network/data 1 x USB plug - and with speaker presets, Separate input and output DSP, 4 input inbuilt DANTE. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge. OR S.I.T.C of of All-Weather 8\\" 2-Way 250W Passive Coaxial Loudspeaker Highly weather-resistant IP56 rating ,Coaxial speaker design with 8\\" Kevlar-reinforced woofer and 1\\" fluid-cooled high-frequency compression driver250W power handling (average continuous pink noise) with high sensitivity provides high SPL capability Consistent 120 x 120° broadband pattern control High-slope passive crossover network for constant coverage and natural midrange Minimum audibility Sonic Guard high-frequency overload protection 80 Hz to 20 kHz frequency range (-10 dB), 100 Hz to 20 kHz frequency response (±3 dB) Built-in 200W 70/100V multi-tap transformer and direct 8-ohm low-impedance transformer bypass Paintable enclosure is constructed of thick ABS and fiberglass and is heavily braced to maximize low-frequency performance Make: BetaThree. OR Supply of Four Channel amplifier with inbuilt DSP, 3000W @2ohm , 2400W @4 ohm; 1400W @8ohm ; 3600W @4Ohm and 4800W@8Ohm in bridge mode; Maximum output voltage 175Vpeak and 55Apeak current; Frequency Response 20Hz-20KHz;S/N Ratio- 104dBA; Crosstalk >70dB@1Khz;THD+N < 0.1%; Slew Rate-50V/microSec; Damping Factor >500@ 20-100Hz; A/D and D/A Converters of 24bit/48KHz; DSP Inbuilt Preset Memory; Crossover Filters - linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR);Input Equalizers - Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass; Output Equalizer ; Limiters - P TruePower™, RMS voltage, RMS current, Peak limiter; Audio signal input 1 Network/data 1 x USB plug - and with speaker presets, Separate input and output DSP, 4 input . The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge |
| 16 | S.I.T.C of Professional 2 Channel Power AmplifierPower(4ohms): 2000W/CHPower(8ohms): 1300W/CHInput Sensitivity: 0.775V/1V/32dB SwitchableFrequency Response: 20Hz-20kHz ±2dBS/N Ratio: >105dBTHD (@1kHz): <0.1% @8Ω, 1kHzIMD (@60Hz/7kHz 4:1): <0.5% @8Ω, 60Hz/7kHz 4:1Damping Factor: >500 @8Ω, 100HzRated Power Supply: 220-230V ~ 50/60HzCooling: Dual Cooling Fan Controlled by Temperature |
| 17 | S.I.T.C of 16 Mic/Line Audio Mixer with digital Effects 16 Mic/Line Audio Mixer with digital Effects , Channels 16,® Ghost Preamps 12,® Sapphire EQ 4-band,dbx® Limiters on inputs 4,Lexicon® Effects, Single Engine, USB Interface, Auxes 4,Subgroups 4 mono/2 stereo, Faders 100mm.(2 bands of swept mids) |
| 18 | SITC Audio Interface Hybrid FireWire and USB Audio Interface with software license. Eight 24-bit analog quarter-inch (TRS) inputs and Eight 24-bit analog quarter-inch (TRS) outputs, Operates on all analog I/O at standard sample rates up to 192 kHz, MIDI I/O,Auto-switching international power supply. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge/Project Manager |
| 19 | Installation and Commissioning of all the above mentioned items and integation of the software and hardware equipments, including the rate of setting up any necessary encolures for storing of consoles etc. as required, mounting of any structural elements to support the fixture etc complete as per directions from Architect in charge and Enginner in charge. |
| 20 | Lighting |
| 21 | SITC of IP66 rated moving head Hybrid projector to shoot a beam of light onto large surfaces. The fixture should have a housing made of Marine Grade Aluminum Alloy and USB upgrade system. Fixture wattage should be in the range of approx. 400W.The fixture should have Beam angle : Beam Projection 2-21°，Spot Projection 3-42° Frost : 5° of atomization, providing a strong Beam and Spot effect with fast and silent X/Y movement that can provide extremely clean static and rotation gobo wheel projection. The fixture should provide a beam diameter of 3.68 meters at a distance of 30 meters, and the illuminance is about 2500 lux min. The average lifespan of the lamp should be at least 1500 hours, with electronic linear focusing 380 W . Channel 28 CH. Double Strobe (0.5 - 9 t/s). The beam should be stronger and have sharp edges, and the beam formed by high- efficiency optics is like a bright beam of light. The fixture should have an Onboard Control display, and a color touchscreen display. Custom Mode 0.25Hz Strobe, 16 international standard DMX512 Channels, Master-Slave Mode. The fixture should have a fixed Gobo wheel with a 11 + 1 animation range with 8 Rotating Gobos + White, Bi-directional flow water animation effect. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge OR SITC of IP65+ rated moving head Hybrid projector to shoot a beam of light onto large surfaces. The fixture should have a housing made of Marine Grade cast Aluminum. Fixture wattage should have 650W or more LED Engine.The fixture should have Beam angle : Zoom 5.4˚ to 44˚; also should have 2 X Frost filter, providing a strong Beam and Spot effect with fast and silent X/Y movement that can provide extremely clean static and rotation gobo wheel projection. The fixture should provide a beam diameter of 1.9 meters at a distance of 20 meters using 5.4 degree, and the illuminance is about 3400 lux min. The average lifespan of the LED should be at least 20,000 hours. Channel 42/54 CH. Electronic Shutter effect: Strobe / Pulse. The beam should be stronger and have sharp edges, and the beam formed by high- efficiency optics is like a bright beam of light. The fixture should have an Onboard Control and display. Control options: DMX, RDM, Art-Net, sACN. The fixture should have a fixed Gobo wheel with a 8 + open, animation range with 7 Rotating Gobos + open, Bi-directional flow water animation effect. The cost is inlcusive of preparation of Shop drawing for the fixture location and its approval based on the idea communicated by Architect in charge. The cost is also inlcudes the rate of customisation such as powder coating, size alteration, beam angle alteration etc. as approved by Architct in charge |
| 22 | The fixture should be having a dimmer with 0 - 100% linear dimming. The fixture should have a full range CMY wheel + One color wheel(13 colors + White, Rainbow-glow effect), and one frost filter. The fixture should have prism wheel（3 pcs prism + 1 prism, ,Multiple prism combination ) Ingress protection of the fixture should be IP66 rated itself (IP-rated enclosure should be prohibited). The fixture should run on AC120~240V Input 50/60Hz. The operating temperature range of the fixture should be - 20°C to 45°C. The storage temperature of the fixture should be -20°C to +70°C. The fixture dimension should be within the dimension of 754 mm (Height) x 320 mm (width) x 509 mm (length) or lesser. The weight of the fixture should be within 43 kg. Lamp Temperature to be 6900K. Horizontal scanning at 540° (160 Bit Precision Scanning with electronic error correction). Electronic Ballast to make the product lighter, brighter, and more stable bulb. more environmentally friendly, Energy Saving. PAN tilt - X Axis - 540° Y-Axis 270 ° with Warranty for 5 years. |
| 23 | RGBW Façade Light 90-120W With DMX Cable and all accessories with Splitter etc |
| 24 | RGBW Façade Light 150-200W With DMX Cable and all accessories with Splitter etc |
| 25 | SITC of DMX Controller & accessories etc |
| 26 | Electrical Control Panel for DMX RGBW Light |
| 27 | SITC of Lighitng Console & software licence: Supply, Installation, Testing and Commissioning of Digital Lighting console with licensed software for dimmer control and LED color mixing of the above light fixtures. The console should have relevant display and should be utilizing a smartphone-like interface for setup, programming and playback. Programming should be part of the item and as per the technical specification mentioned below and any other item required to complete the work in totality as directed by the Engineer-In charge: • It should support 512 DMX channel and above lighting fixtures. • It should have playback faders of 1cue-stack & 2 chases. • It should have min 02 nos USB ports to program and to store lighting program on the console. • It shall consist min 28000 library fixtures files. • It shall capable of connecting external monitor via HDMI port. |
| 28 | Electrical Control Panel for Projector & Other Projector Equipments for Power |
| 29 | Porta Cabin (All Weather) |
| 30 | On site Warranty & 1 Years with Operation & Maintenance (1 Technician & Operator) Basic Cost of Work with 1 Year Total O&M |
| 31 | GST Extra as per applicable Please Enable Macros to View BoQ information |
