|
| 1 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 3 | 200x10 mm |
| 4 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 5 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 7 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 10 | Old work (one or more coats) |
| 11 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 13 | One or more coats on old work |
| 14 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 15 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 16 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 17 | 10 litre capacity - White |
| 18 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 19 | Providing and fixing brass bib cock of approved quality |
| 20 | 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 22 | 15mm nominal bore |
| 23 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 24 | 15 mm nominal bore with 45 cm length. |
| 25 | Providing and fixing PTMT grating of approved quality and colour. |
| 26 | Circular type. |
| 27 | 100 mm nominal dia. |
| 28 | 125 mm nominal dia with 25 mm waste hole. |
| 29 | Repairs to existing doors PVC by chiseling,cutting and tightening the styles and rails etc. wherever required including dismantling and refixing the same all complete as per the directions of Engineer-in-Charge. |
| 30 | Cleaning of wall & floor tiles of toilet and other sanatary and water supply items with approved Tile cleaner of Roff or equivalent brand removing all stains, dust etc. filling white cement whereever required as per direction of Engineer-in-Charge. |
| 31 | Providing Beldar to clean the dust from floors, walls of room, in the rented out portion building as per the direction of E-I-C. |
| 32 | Credit for old and unserviceable material received from dismantling:- |
| 33 | Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brass gate valves, CP ring,CP brass towel rail etc. of all dia |
| 34 | PVC cistern Please Enable Macros to View BoQ information |
