|
| 1 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 3 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 4 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 5 | Brick work with common burnt clay bricks of class designation 5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and fixing 25 mm thick Cudappah stone slab with cement mortar 1:4 ( 1 cement : 4 m.sand ) for cup board shelves . |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 9 | Second class teak wood |
| 10 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 11 | Second class teak wood |
| 12 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). |
| 13 | 18 mm thick |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 15 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 16 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 17 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 18 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 19 | With ISI marked stainless steel butt hinges of required size - Second class teak wood |
| 20 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 21 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 22 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 23 | 250x16 mm |
| 24 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 25 | 200x10 mm |
| 26 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 27 | 125 mm |
| 28 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 29 | Twin rubber stopper |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) a) Second class teak wood |
| 31 | 40 mm thick shutters |
| 32 | Providing and fixing 6mm thick cement particle board and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): |
| 33 | Providing and fixing Pre-laminated medium density fibre board with both side decorative lamination Grade I, Type II interior grade IS : 14587 marked, in shelves with screws and fittings wherever required (fittings to be paid separately). a) 8 mm thick |
| 34 | Providing and fixing Interior Grade plywood conforming to IS : 10701 marked, in shelves , furniture with screws and fittings wherever required (fittings to be paid separately). a) 18 mm thick interior grade |
| 35 | Providing and fixing Structural plywood conforming to IS : 10701 marked, in shelves with screws and fittings wherever required (fittings to be paid separately). a) 12 mm thick |
| 36 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : a) 150x40x5.0 mm (heavy type) |
| 37 | 150x40x5.0 mm (heavy type) |
| 38 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 39 | 300x12 mm |
| 40 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 41 | 100x12 mm |
| 42 | Providing and fixing bright finished Ornamental brass handles with screws etc. complete: |
| 43 | 280x55mm |
| 44 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 45 | 125 mm |
| 46 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 47 | single rubber |
| 48 | Providing and fixing bright finished Ornamental brass sliding door bolt with necessary screws, etc. complete. |
| 49 | 300x16 mm |
| 50 | Providing and fixing bright finished Stainless steel close fitted O crank hinges for cupboards/wardrobes etc, with necessary screws etc. complete : |
| 51 | Providing and fixing bright finished Stainless steel handles for cupboard doors with screws etc. complete: |
| 52 | 75 mm |
| 53 | Providing and fixing 8mm dia single steel wheel fixed between powder coated M.S.sheets for cupboard sliding doors with screws etc. complete: |
| 54 | Providing and fixing 32mm dia round powder coated M.S.sheet knob for cupboard sliding doors with screws etc. complete: |
| 55 | Providing and fixing special quality bright finished metalic cupboard or ward robe round mutlipurpose locks with four levers of approved quality including necessary screws etc. complete. |
| 56 | Providing and Fixing PVC sheet in the door shutters with adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 57 | 1.0 mm thick |
| 58 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 59 | 1.0 mm thick. |
| 60 | Providing and Fixing 24 gauge Aluminium sheet in the door shutters with brass nails iucluding cutting and making good the shutters etc, complete. |
| 61 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 62 | Double charge vitrified tile polished finish of size |
| 63 | Size of Tile 600 x 600 mm |
| 64 | Providing and fixing 6mm thick stainless steel square rod in the tile flooring including making necessary groove using cutting machine and filling joints with white cement mixed with pigment to match the shade of tiles etc, complete. |
| 65 | Providing and Fixing PVC sheet in floors with adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and making good the floors etc, complete. |
| 66 | 0.60 mm thick |
| 67 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. |
| 68 | Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 69 | 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. |
| 70 | 12 mm cement plaster of mix : |
| 71 | 1:6 (1 cement: 6 fine sand) |
| 72 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 73 | 1:6 (1 cement: 6 fine sand) |
| 74 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 75 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 76 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 77 | Two coats. |
| 78 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 79 | Varnishing with varnish of approved brand and manufacture: |
| 80 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. |
| 81 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 82 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 83 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 84 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 85 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 86 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 87 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 88 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 89 | Removal of PVC Sheet flooring by cutting , peeling off and scraping and removal of adhesive all complte as directed by the Engineer in charge. |
| 90 | Dismantling G.I. pipes including taking out the pipes, fittings and clamps , manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 91 | 15 mm to 40 mm nominal bore |
| 92 | Dismantling wash basins of size 550 x 440 mm , including fittings and clamps / bolts all complete as directed by the Engineer-in-charge : |
| 93 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 94 | For fixed portion |
| 95 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 96 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 97 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 98 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 99 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 100 | Extra for Powder coating 50 microns on available aluminium sections at site by sending to the factory plant including transportation from site to plant & plant to site, loading and unloading of materials etc,complete |
| 101 | Providing and fixing 450 mm dia RCC Hume pipe 300mm long in the brick masonry wall with cement mortar at the height of 3.00m above floor level including cutting and making good the walls etc, complete. |
| 102 | Shifting of files,steel almirahs,fridge,steel chairs,wooden tables,steel racks,Cushion chairs,Storage units including lifting from 3 rd and 4 th floor old DRT office to Level 4 building first floor by mechanical transportation,loading,unloading and placing them in the designated location in DRT office premises. |
| 103 | Cleaning of sewerage line by jet rodding , desilting the choked 11 nos of manhole chambers , removal of muck, brick bats and other wastes away from the site , washing / flushing of chambetrs and checking and ensuring , free flow of sewage all complete as directed by the Engineer in charge. Please Enable Macros to View BoQ information |