|
| 1 | A. Repair of propeller shaft, bearing housing and PRG foundation Gas set for heating of bended bearing housing leg and foundation plate of PRG box. |
| 2 | Gauging electrode for gauging of bulged material from bearing housing and PRG foundation. |
| 3 | Suitable electrode for material filling in legs of bearing housing and foundation plate of PRG box. (Electrode- 7018) |
| 4 | Suitable electrode for welding of support plates in legs of bearing housing and foundation plate of PRG box. (Electrode- Lomelt 205) |
| 5 | Machining i.e. taper turning of bearing fitting surface of propeller shaft. |
| 6 | Supervisor: 01 person X 04 days |
| 7 | Fitter: 01 person X 04 days |
| 8 | Welder: 02 person X 04 days |
| 9 | Helper: 03 person X 04 days |
| 10 | B. RHS drive shaft housing and intermediate shaft housing Industrial Gas set for cutting of locks etc. |
| 11 | Cutting electrode for gauging of bulged portion of housings |
| 12 | Suitable steel electrode for material filling in cracked portion of housings (Lomelt 205) |
| 13 | Low hydrogen electrode for material filling in oval shaped housings (Jointing 7018) |
| 14 | Grinding stones for grinding of surfaces |
| 15 | Supervisor: 01 person X 03 days |
| 16 | Fitter: 01 person X 03 days |
| 17 | Welder: 02 person X 03 days |
| 18 | Helper: 03 person X 03 days |
| 19 | C. Repair of RHS Drive shaft and driving wheel: Cutting electrode for removal of bulged portion of lugs and splines. |
| 20 | Material filling in lugs of driving wheel with low hydrogen electrode. (Electrode – 7018) |
| 21 | Material filling in splines of sprocket and drive shaft with suitable steel electrodes ( Electrode – Lomelt-205 ) |
| 22 | Hard facing electrodes ( Electrode – Lomelt- 310) |
| 23 | Grinding stone for grinding of splines of drive shaft and driving wheel |
| 24 | Lock fitment |
| 25 | Supervisor: 01 person X 05 days |
| 26 | Fitter: 01 person X 05 days |
| 27 | Welder: 02 person X 05 days |
| 28 | Helper: 02 person X 05 days |
| 29 | Contractor’s Profit @10% |
| 30 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
