|
| 1 | Items: |
| 2 | Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark. |
| 3 | Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. for 63 Amp |
| 4 | Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. |
| 5 | Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G. (3-14-4 / 76) |
| 6 | Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg. |
| 7 | Supplying & erecting XLPE (IS: 7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. 3 core 2.5 Sq.mm. |
| 8 | Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistoried copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (B) 4 core 4 Sq. mm. |
| 9 | Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. |
| 10 | Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable (A)50 mm outer dia |
| 11 | Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5 Sq. mm. |
| 12 | Solderless crimping type Copper lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm. |
| 13 | Providing cement concrete for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffling or any other purpose. 0.5 X 0.5 X 0.5 X 56 (6-3-8 / 122) |
| 14 | Supplying & erecting approved make SMC press moulded composite FRP. (Plastic) loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 4 way & hinged doors having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps & earth bolt of following size of box. (c) 150mm x 125mm x 100mm. (deep) |
| 15 | Supplying and erecting nuwood 12 mm thick on existing angle iron frame. |
| 16 | Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following capacity for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly epoxy power painted inside and outside with hinged doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch of same make and suitable input and output Bakelite terminals and with door earthing approved by Engineer in charge. (C) 63 Amp |
| 17 | Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (i)4 way |
| 18 | Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer – in – charge. (B) 50 mm. dia. (2 Inches) |
| 19 | (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (i)20- 30W |
| 20 | Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (iv) above 90 to 120 watts |
| 21 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 25 Sq. mm |
| 22 | Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (C) 3 KVA with 1Hr Backup |
| 23 | Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with check nut complete painted with one coat.of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket 0.5 Mtr |
| 24 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (A) 2 core 2.5 Sq. mm Please Enable Macros to View BoQ information |
