Tender For Additional Protective And Repair Work On The 2X12.50M Reinforced Cement Concrete T-Beam Culvert Bridge Located At Km 9 Of The Vishesharganj-Sangr Ur-Dhaurahara Road In District Amethi, Amethi-Uttar Pradesh
TDR : 55629875
Tender Notice
BOQ
7 Days Left
Amethi
Uttar Pradesh
Tender For Additional Protective And Repair Work On The 2X12.50M Reinforced Cement Concrete T-Beam Culvert Bridge Located At Km 9 Of The Vishesharganj-Sangr Ur-Dhaurahara Road In District Amethi
Name of Work:- Additional protective and repair work on the 2x12.50m RCC T-Beam culvert bridge located at Km 9 of the Vishesharganj-Sangr ur-Dhaurahara Road in District Amethi
Sl. No.
Item Description
1
Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.)
2
Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, 2 transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
3
Providing and laying filter material underneath pitching in 3 slopes complete as per drawing and technical specifications Clause 1302
4
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications
5
Type-A, W\\": Metal Beam Crash Barrier (Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m 5 high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811
6
Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grado cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
