Tender For Renovation & Modernization Works For Nabl Accreditation Of Center Of Excellence Of Sps (Plant Pest Diagnostic Laboratory) For Export Promotion Of Plants And Plant Productions In Consonance With Wto-Sps Aggreements In College Of Agriculture
Tender Value
11.65 Lakhs
Estimated cost
Bid Submission
29 May 2026
0 days left
EMD
23500
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation & Modernization Works For Nabl Accreditation Of Center Of Excellence Of Sps (Plant Pest Diagnostic Laboratory) For Export Promotion Of Plants And Plant Productions In Consonance With Wto-Sps Aggreements In College Of Agriculture At Svpuat, Meerut
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | 12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) |
| 3 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. LANGUAGE AS PER DSR |
| 4 | Providing and laying 2 mm thick PVC Matt flooring |
| 5 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 6 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesivebonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality LANGUAGE AS PER DSR |
| 7 | Providing and fixing 18 mm thick HDMR with both side balancing lamination factory pressed BWP grade ply as per IS 710 of approved brand xes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. LANGUAGE AS PER DSR |
| 8 | Providing and fixing 12 mm thick frameless toughened glass |
| 9 | Providing and fixing of Stainless steel Sink 610x460x200 mm size |
| 10 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 11 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. LANGUAGE AS PER DSR |
| 12 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100mm |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats) |
| 15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 16 | Renewal of old putty of glass panes |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 18 | P/F of Blinds curtain with accessories complete for windows |
| 19 | Wiring point for light/Fan with 1.50 sqmm copper wire |
| 20 | P/F of 300 mm sweep Exhaust Fan, Single Phase AC 220-240 V, 1300 -1400 RPM, copper winding motor, Hevells, Crompton, Orient Make |
| 21 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 22 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch |
| 23 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet |
| 24 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet |
| 25 | S/Fixing of Electronic Fan regulator |
| 26 | S/Fixing of LED Strip light warm white Indoor, 120 LEDs/m, IP 65 protection |
| 27 | S/Fixing of 22 W LED Tube light |
| 28 | S/Fixing of LED Panel light 2x2 ft,. (System lumen efficacy > 135 lm/Watt) |
| 29 | Earthing with G.I. earth plate 600x600x6 mm including accessories, and providing masonry enclusre with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 30 | P/F of 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 31 | P/F of PVC Conduit Pipe 25 mm dia |
| 32 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. |
| 33 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm |
| 34 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender