|
| 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge within adistance of 60 metre. |
| 2 | Distt. Of old damaged Brick work in cement mortar |
| 3 | Excavation in foundations in ordinary soil ( Loam clay or sand ) including lift up to 1.5 m and lead up to 30.o meter and including filling, watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer- in charges up to a distance of 30 m from the foundation trenches |
| 4 | Providing and laying PCC with cement, C Sand and 40 mm gauge stone ballast in 1:4:8 |
| 5 | First class B/w in 1:4 Cement C'sand mortor in Sub Structure including supply of all meterial labour t&P etc required for proper completion of work |
| 6 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing |
| 7 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Beam |
| 8 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Column or Wall |
| 9 | Supply, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including supply of all material, labour, Tools & Plants etc. required for proper completion of work |
| 10 | First class brick work in 1:4 cement and coarse sand mortar in Super Structure & Filling one brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. |
| 11 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work |
| 12 | Apply two coat superior synthetic enamal paint including primer coat on steel surface |
| 13 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). |
| 14 | Finishing wall with weather coat paint (Asian or Berger Brand) on new surface with two coat to give an even shade including supply of all material, labour & tools and plants etc. requiredfor proper completion of the work. |
| 15 | Supply and Fixing inoguration black granite stone padestal including grooving matter, brick work, plaster, painting etc. all complete |
| 16 | First class B/w in 1:4 Cement C'sand mortor in Sub Structure including supply of all meterial labour t&P etc required for proper completion of work |
| 17 | 12 mm thick Plaster with cement & course Sand of 1.25 FM Mortar in 1:4 |
| 18 | Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I. |
| 19 | Supply,Laying and Consolidation of 22.40-53 mm gauge stone Ballast |
| 20 | Supply and Laying of Rubber moulded C.C Interlocking Tiles 80mm thick in road pavement having a compressive strength not lass than 300 kg / cm2 including 40 mm thick bed of fine sand of F/M 1.25 |
| 21 | >wyk lSV ¼ikap izdkj ds >wys½ ¼>wyks ds izdkj½• Lohax >wyk Mcy lhV okyk 2** th0vkbZ0 ikbZi ch0 Dykl rFkk 07,e0,e0 tUthj cSafjx VSfLVax okyhA ¼110 fdxzk0½• LykbZM fon gV 1-25** th0vkbZ0 ikbZi ch0 Dykl vkbZ0,l0vkbZ0 ekdZA¼235 fdxzk0½• lh0&lkW >wyk 2** th0vkbZ0 ikbZi ch0 Dykl 1-25** ikbZi czSdsV 04 lhV rFkk isfUVax lfgrA¼40 fdxzk0½• fjoksfYoax IysVQkeZ 1** th0vkbZ0 ikbZi ch0 Dykl 40 x 40 x 6 ,axy rFkk 14 th0 IysVQkeZ esa ,e0,l0 'khVA¼70 fdxzk0½• taxy fte 1** ikbZi th0vkbZ0 rFkk 3@4** th0vkbZ0 ikbZi ch0 Dykl isfUVax lfgrA¼75fdxzk0½ |
| 22 | Supply & Fixing Garden Bench (Victoria Type Bench)•Cast Iron having back height of 720 mm and seating height of 390 mm.•M.S Tube of 65mm X 25mm rectangular tube having length of 1520 mm in 10 Nos. •For seating purpose with extra support 25mm X 5mm M.S Flat for extra stability all sharp and rough edge of Bench are to be grinded with grinder and all fill up with m seal where its required necessary thus bench is having the provision of hole past system (for grouting). •Bench in complete with a coating of 1st class red oxide and with two coats of synthetic enamel of 1st class quality paint in green colour. •Finally bench is assembled with nuts and bolts. •Gross weight of each bench is 70 kg. |
| 23 | Supply, boring and fixing 1.50 HP single phase submarcible pump including boring, 110mm dia PVC Stainer and Plaine Pipe 6kg/sqcm Tirupati make ISI Mark, 32mm dia GI Pipe B-Class Jindal Make ISI Mark, Filter Colth,Glowing of 1.5 HP Single Phase Motor Pump Set ISI Mark Aroma/Rockwell Make, Copper Cable 3 core 2.5mm2 Kent/Finolex Make ISI Mark,Aluminium Cable 2 core 10mm2 Kent/Finolex Make ISI Mark, Panel with overload relay and single phase protection ISI Mark Haveles/Bentex Make, 32mm dia MS Clamp,1.25” Elbow etc. all T&P,labour,material, all connections and wiring as per atteched specifications and as per directed Engineer in Charge |
| 24 | Deduct cost of old brick bats |
| 25 | GST 18 % Please Enable Macros to View BoQ information |
