|
| 1 | Scraping of old painted surface including disposal of all scraped material upto a distance of 30 mtr for 20 mm thick bituminious surface as directed by engineer in charge |
| 2 | Dismantling existing plaster including disposal of refuse as directed by the Engineer in charge within adistance of 60 metre. |
| 3 | 12 mm thick Plaster with cement & course Sand of 1.25 FM Mortar in 1:4 |
| 4 | Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats over plastered surface to prepare the surface even and smooth complete. |
| 5 | Finishing wall with weather coat paint (Asian or Berger Brand) on new surface with two coat to give an even shade including supply of all material, labour & tools and plants etc. requiredfor proper completion of the work. |
| 6 | Apply two coat superior synthetic enamal paint including primer coat on steel surface |
| 7 | First class B/w in 1:4 Cement C'sand mortor in Sub Structure including supply of all meterial labour t&P etc required for proper completion of work |
| 8 | Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I. |
| 9 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work |
| 10 | Supply & Fixing Garden Bench (Victoria Type Bench)•Cast Iron having back height of 720 mm and seating height of 390 mm.•M.S Tube of 65mm X 25mm rectangular tube having length of 1520 mm in 10 Nos. •For seating purpose with extra support 25mm X 5mm M.S Flat for extra stability all sharp and rough edge of Bench are to be grinded with grinder and all fill up with m seal where its required necessary thus bench is having the provision of hole past system (for grouting). •Bench in complete with a coating of 1st class red oxide and with two coats of synthetic enamel of 1st class quality paint in green colour. •Finally bench is assembled with nuts and bolts. •Gross weight of each bench is 70 kg. |
| 11 | Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 12 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm cum |
| 13 | Rough dressing the trenched ground including breaking clods. |
| 14 | Fine dressing of the ground. |
| 15 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge |
| 16 | CROSS WALKER : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDING PURPOSE 5 FT X 2 FT X 5 FT. [MR] |
| 17 | SINGLE POLE CYCLE : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDING PURPOSE 3.5 FT X 2 FT X 4 FT |
| 18 | SIT UP STATION : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDING PURPOSE 4.5 FT X 4.5 FT 2 FT [MR] |
| 19 | SEATED CHEST PRESS : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDING PURPOSE 7 FT X 6 FT X 3 FT. |
| 20 | PUSH OR PULL CHAIR : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDING PURPOSE 7 FT X 6 FT X 3 FT |
| 21 | TRIPLE TWISTER : MAIN FRAME - 4 INCHI 114 OD GI B CLASS OF ISI MARK, THICKNESS OF 3 MM, OTHER CONNECTING PIPES, 41 OD B CLASS GI, 32 OD B CLASS GI, ALL MACHINES ARE FITTED ON LOCK, BEARING OF KG COMPANY OR SIMILAR WILL BE USED BEARING, SIZE 6205 ZZ, ALL MACHINES ARE POWDER COATED FOR GIVING EXTRA LIFE, AND WILL BE HEAT AND WATER RESISTANT, SEATS CAP AND FOOTREST IS OF ALUMINIUM CASTED, 25 MM IRON ROD IS USED IN BEARING SHEET, 10 MM FLENGE OF 200 MM DIA IS USED TO FIX THE, MACHINES, GAS METAL ARC IS USED FOR ALL WELDINGB PURPOSE 4 FT X 4 FT |
| 22 | GST 18 % Please Enable Macros to View BoQ information |
