Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | House service connection at Balugaon Town (3438 nos) including supply, laying, jointing of HDPE pipe, fittings, valves, and restoration of road surface complete. |
| 2 | Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from PHE Deptt./ WATCO CI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completition of the work, lifting of excess excavated materials/ debrises from work site & disposing within 5 KM radious by mechanical transport, fixing 1/8\\" dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge. |
| 3 | With 100mm dia distribution main |
| 4 | With 150mm dia distribution main |
| 5 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPE pipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.complete as per site condition & ditrection of Engineer in charge. |
| 6 | Laying of Distribution Main using DI K-7 and MS pipes (100 mm to 250 mm dia, 4709 m length) at Balugaon Town including jointing, testing, and commissioning complete. |
| 7 | Cutting asphalt or bituminousof flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge. |
| 8 | Bituminous road |
| 9 | Cutting Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge. |
| 10 | Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge. |
| 11 | In all kinds of soil |
| 12 | Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring). |
| 13 | Laying & Carriage Cost |
| 14 | 100mm dia DI (K7) |
| 15 | 150mm dia DI (K7) |
| 16 | 200mm dia DI (K7) |
| 17 | 250mm dia DI (K7) |
| 18 | Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge. |
| 19 | Material Cost |
| 20 | Laying Cost |
| 21 | Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe) |
| 22 | Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only) |
| 23 | 100mm diameter |
| 24 | 150mm diameter |
| 25 | 200mm diameter |
| 26 | 250mm diameter |
| 27 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 28 | 100mm dia M.S.Pipe (4 mm thick) |
| 29 | 100mm dia M.S. Flange.(12mm thick) |
| 30 | 100mm dia x 90' M.S. Bend |
| 31 | 100mm dia M.S. Flange Joint |
| 32 | 150mm dia M.S.Pipe (4.5 mm thick) |
| 33 | 150mm dia M.S. Flange.(12mm thick) |
| 34 | 150mm dia x 90' M.S. Bend |
| 35 | 150mm dia M.S. Flange Joint |
| 36 | 200mm dia M.S.Pipe (6.30mm thick) |
| 37 | 200mm dia M.S. Flange.(12mm thick) |
| 38 | 200mm dia x 90' M.S. Bend |
| 39 | 200mm dia M.S. Flange Joint |
| 40 | 250mm dia M.S.Pipe (6.30mm thick) |
| 41 | 250mm dia M.S. Flange.(12mm thick) |
| 42 | 250mm dia x 90' M.S. Bend |
| 43 | 250mm dia M.S. Flange Joint |
| 44 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by Flame cutting set of pocket etc all complete. |
| 45 | Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site |
| 46 | Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK |
| 47 | Valve Cost |
| 48 | 100mm dia |
| 49 | 150mm dia |
| 50 | 200mm dia |
| 51 | 250mm dia |
| 52 | Laying Cost |
| 53 | 100mm dia |
| 54 | 150mm dia |
| 55 | 200mm dia |
| 56 | 250mm dia |
| 57 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab. |
| 58 | Construction of brick masonry sluice valve Chamber of size (9.0x.9x1.5mtr) |
| 59 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge. |
| 60 | Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour. |
| 61 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 62 | Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 63 | Removing & re-fixing of precast cement concrete interlocking paving blocks of all sizes over 50 mm thick course sand bedding (duly compacted) including filling of joints with sand complete in all respect. |
| 64 | Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. |
| 65 | Supplying all materials, labour, and T&P for removal / carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge. |
| 66 | Supply installation of globe valve OS & Y type rising spindle bolted bonnet with parabolic disc for manual flow control Moc - ASTM 216 Gr WCB SS410 disc nut stem and back sheet bush with handle wheel and nut flanged end with pilot threaded bore on both flange for pressure gauge attachment etc all complete as per the direction of Engineer-in-charge. |
| 67 | Valve Cost |
| 68 | 100mm dia |
| 69 | 150mm dia |
| 70 | Laying Cost |
| 71 | 100mm dia |
| 72 | 150mm dia |
| 73 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete as directed by Engineer In-charge |
| 74 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014cum in volume within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department |
| 75 | Intake Automation at (Balugaon and Banpur) includes supply, installation, testing, and commissioning of automated systems with sensors, valves, and SCADA integration for efficient, reliable, and remotely controlled water intake operations. |
| 76 | PLC PANEL & AUTOMATION SYSTEM AT INTAKE WELL |
| 77 | PLC panel for Raw water pump House with two Pumps: Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration.The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse.PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO.DI –16 num DO – 16 num AI –8 num AO – 4 num.10 inch color TFT HMI complete with programming shall be provided to interact with PLC. The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house.MCB 10A DP – 1 num MCB 4A DP – 4 num ,24 VDC Power Supply 10A – 1 num, Push Buttons – 7 num Selector Switch - 2 num Control Contactor – 2 num, Annunciator with 6 Windows NO to NC Type,Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num,Panel Light with Door Switch – 1 num Control Indication Lamp – 5 num ,Wiring + TB etc – 1 lot Hardware – 1 lot and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 78 | Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 &Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license and completed as per Engineering-In-Charge. |
| 79 | Supply, Installation and commissioning of single phase 1KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance free battery system for 1hour backup including cables power plug, switch etc. all Complete Works and completed as per Ingineering-In-Charge. |
| 80 | Supply, Installation and commissioning of AC 1.5 Ton 5 Star and completed as per Engineering-In-Charge. |
| 81 | Supply, Installation of Control Desk -1 no., Table - 1 no. & Chairs - 2 nos. at SCADA room and completed as per Engineering-In-Charge. |
| 82 | Supply, Installation, Testing, Intgeration & Commissioning of 43\\" LCD monitor at Conf. Room for display of total water system (Online) complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 83 | Designing, Supplying, Installing, commissioning & testing of Raddar type Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART.Power supply - 24V DC ext.Display - 4\\" LEDRange- 0-10 mtr - 20 mtr.Accuracy - +/- 0.25% of FullScale or betterEnclosure- IP 68Mounting - On PLC panel all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 84 | Supplying,Installation & testing of 4G/5G Dual Sim LTE Router with 1 X LAN, 1 X WAN, RS485 on board with one at a time usage, WI-FI (802.11 b / g / n), 1 X Cellular Antenna, 1 X WIFI Antenna, Model- SW245 (RS485) Make- SWTPL and comlpeted as per Ingineering_In-Charge. |
| 85 | Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum with linear scale and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 86 | Pressure Transmitter for raw& pure water pumping station:Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement.Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scale or betterEnclosure- IP 68 and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 87 | Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 C x 1.5 sq.mm as per IS 694 twisted shielded copper armoured conductor on wall in GI tray or in ground suitable for supplied DC Voltage and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge (Make:- Finolex/L&T/Anchor/Havells/V-Guard/Equivalent Make with approval of the Authority) |
| 88 | Supplying and erecting armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner. 4c X 2.5 sq mm Copper conductor PVC insulated, armoured control cable and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge (Make:- Finolex/L&T/Anchor/Havells/V-Guard/Equivalent Make with approval of the Authority) |
| 89 | Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 90 | Supplying, Fitting,fixing & Commissioning,of The body PN-16 and cover will be ASTM A536 Ductile Iron can be integrated w ith PLC panel for operation with a minimum pressure in upstream 0.2 kglcm2 to a maximum pressure of 8 kglcm2. The valve seat shall be a solid, one-piece SS-316 desian and shall have a minimum five-degree taper on the se ating surf ace for a positive , drip-tight shut off. The diaphragm assembly shall contain a self-cleaning S5-303 stainless steel stem of sufficient diameter to withstand high hydraulic pressure differentials and shallbe fully guided atits both ends by a bearing in the main valve cover and an integral bearing in the valve seat, in order to be pr actically in balance along its fullift for limiting encessive friction, thus incre asing its ability| to react when performing a correction. The diaphragm shall not be usedias the seating surface and it shall be fully |supported by machined surfaces of the valve body or cover in its closed or opened position. In operating position, its inactive surface shall be completely supported for securing its maximum longevity. The control willbe achieved by, operating 2 number Solenoid Valves mounted on the main Valve. The Connecting tubing on the Main Valve willbe SS with |SS fiting from reputed companies makes. The flexible tubing on Main valves will not be allowed. of the approved make:(Krohne marshal / E&H / Abb / Siemens/Equivalent make with approval of authority) to control water supply, including cost of material with alltaxes transporatation to sitelstorage with insurance. |
| 91 | 300mm dia |
| 92 | Supply & installation of full-bore type electromagnetic water flow meter at various locations for monitoring volume of water flow, with following technical specification: Drinking Water Application, Liner:- Hard rubber, Process Connection:- PN10, St37-2/FE 410W B, flange EN1092, Electrodes:- 1.4435/3161, Calibration: 0.5%, Approval: Nonhazardous area Housing Field Alu, Sensor IP68 NEMA6P, Cable, Remote Version: 20 m coll and signal cable, Power Supply: 20-28VDC /11-40VDC Display: 2-line, push buttons, all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge Make- Krohne marshal / E&H / Abb / Siemens make |
| 93 | 400mm dia |
| 94 | Supply, installation, testing & commissioning of Chemical earthing System with Backfill compound covered with earthpit and cover including transportation to site, unloading etc. all complete as per direction of Engineer-in-charge |
| 95 | Supplying all materials,labour,t&p and fixing of PLC Compatable ATV930-VFD-90KW, HEAVY DUTY 16AMP, WITH BREAKING UNIT VFD floormounted with Control Panel made out of 2MM C.R Powder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1 No ,RY Bindicator-1set, digital ammeter-1No digital volt meter- 1No, 4A control all complete as per specification and the direction of Engineer-in-charge. |
| 96 | 90 KW |
| 97 | WTP Automation (10.5 MLD) includes supply, installation, testing, and commissioning of automated systems with sensors, actuators, and SCADA integration for efficient, reliable, and remotely controlled water treatment operations. |
| 98 | Instrumentation of WTP(10.5 MLD) |
| 99 | HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/ equvalent) in cable trench or buried as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 100 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints etc. as per specification. all Complete Works Screened cable unarmoured. |
| 101 | 1.5 sqmm 4 C CU AR Shielded Cable |
| 102 | 1.5 sqmm 2 CU AR Shielded Cable |
| 103 | Instrument Cable- 2 Pair 1.5 mm2 cable |
| 104 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints Screened cable unarmoured etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 105 | CAT-6 Dlink cable |
| 106 | Supply & installation of Open channel flow meter - ultrasonic/RADER BASED for inlet channel flow meter(Measurement Range:0-1500cum/hr),Accuracy 0.2%,Repeatability : Better than 1% of Span,Controller shall be panel mountes all completed as per direction of Engineer in charge.Make- Reputed make with ISI standard like Forbes Marshall/ AQUADAX/Siemens/VEGA/E&H |
| 107 | LOH ( Loss of Head) indicator with display unit - 4 sets at filter house for auto wash of filter bed with following technical specifications:-Housing : Cast Aluminium, Powder Coated. Mounting: Wall Mounting Power Supply : 230 V AC, 50 Hz Power Consumption : 4 VA (approximately) Adjustment Range : Span : Min 10%cof Electrode Length Alarm : A relay C/O rated 6 Amps 230 V, non-inductiveload adjustable throughout range Current output : 4-20mA DC non isolated, max. load resistance 600 Ohms, corresponding to differential level Accuracy : ±4% of Electrode Length Option : 1. Local as well as Control Room Display. 2. Loss of Head (LoH) can be supplied with Rate of Flow (RoF) in a common CA Housing with IP-55Protection Make-Reputed make like Siemens/Sapcon. |
| 108 | PLC panel for Filter bed: Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration.The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse.PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO.DI –16 num DO – 16 num AI –8 num AO – 4 num.10 inch color TFT HMI complete with programming shall be provided to interact with PLC. The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house.MCB 10A DP – 1 num MCB 4A DP – 4 num ,24 VDC Power Supply 10A – 1 num, Push Buttons – 7 num Selector Switch - 2 num Control Contactor – 2 num, Annunciator with 6 Windows NO to NC Type,Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num,Panel Light with Door Switch – 1 num Control Indication Lamp – 5 num ,Wiring + TB etc – 1 lot Hardware – 1 lot and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge.(2 no's of Twin Bed, 1 no's of PLC) |
| 109 | Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 &Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license and completed as per Engineering-In-Charge. |
| 110 | Supply, installation of online chlorine,Turbidity & PH analyser with following technical specification(ABB/E & H/Forbes Marshall) a)Chlorine sensor b)Battary 4X19AH c)5 Micron Cartridge filter d) 4G Modem with GSM/Ethernet/Fibre Output e)FRP/Stainless Enclosure f)Flow cell for chlorine & Turbidity Sensor g)Turbidity sensor with RS 485 Modbus output h)PH sensor i)Controller 4 channel |
| 111 | Supply of Pressure transmeter (transducer) to be installed in delivery main with following technical specification i,e. Range up to 7 kgf/cm2,Type-Sensor, Power Supply-24 DC, Out put-4 to 20mA, Make-E & H/ABB/VEGA/WIKA.Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scaleor betterEnclosure- IP 68 |
| 112 | Provision of Glycerine filled Pressure Gauge with fittings & isolation ball valve with socket including cost of all materials, Transportation to site etc all complete all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 113 | Supply, Installation and commissioning of soft Starter with six wire bypas arrangement up to 150HP and completed as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 114 | Wash water tank (Back wash tank) Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext.,Display - 4\\" LED ,Range- 0-10 mtr - 20 mtr.,Accuracy - +/- 0.25% of Full Scale or better ,Enclosure- IP 68 ,Mounting - On PLC panel. |
| 115 | Design Engineering Procurement Supply Installation and commissioning of complete Gas chlorination system with 1W-15 gas chlorination each of capacity 10kg/hr with all associated accessories such as remote vacuum regulator automatic change over module.Anti syphon ejectors,instruments,pipes valves,fittings including chlorine leak neutralization system with caustic tank tower,packing,pumps,blowers,detectors,sensors.Chlorine safety scrubbing system including other safety equipments etc all complete as per the specification mentioned in DTCN Design Engineering Procurement ,supply and installation of choirmaster pumps of capacity 5 m3/tir,Head 20m(MOC C.CS Bronze 200% Design Engineering,Procurement & Supply and installation of safety shower & eye wash facility Design Engineering.Procurement Supply and installation of diffused arrangement of 2 inch dia preforated pipes with all support joints etc EOT of 3 ton capacity with tonner lifting bar and weigh scale Exhaust fan as required.Flow meter with data recorder |
| 116 | Supply and delivery of Actuator control sluice valve of PN 1.6 with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof . Fitting and fixing of sluice valves with tail pieces, nesaceery rubber packing, SS 204 nut bolt including labour, T&P, transportation to site from store and fixing the surface boxes with electric actuator resistant to high pressure and robust design, torque 7-2000 Nm, motion range 0-360°, voltage 220V AC, applicable for actuating multi-turn valves, with Case Body, Opening Mete, Inlet Wire Lock, Rubber Cover of Handle Shaft, No-Bracket Installation, Gear Box Cover, Electric Cover, Wiring Cover, Handle Shaft Cover, Output Shaft & Adapter. |
| 117 | 100 mm |
| 118 | 150 mm |
| 119 | 250 mm |
| 120 | 300 mm |
| 121 | 300x300 mm |
| 122 | Supply, Installation and commissioning of single phase 1KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance free battery system including cables power plug, switch having application in 24V lot DC Battery (drytype) charging to output continuous 3 hrs power backup all Complete Works. |
| 123 | Design, manufacture, supply, installation, testing and commissioning of SCADA System for WTP Plant, Sand Filter beds & pump house.Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares. PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW,Rs232 & Rs485 port, 2no RJ45 ports, Keyboard, Optical Mouse,32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.SCADA Software of reputed company with developer & runtime license with minimum 512 number of Tags with following features & functions.1. Supervise real-time data in the form of graphical presentation.2. Control WTP processes locally or through Remote locations.3. Dynamic process Graphic, It should resemble the process mimic. SCADA should have good library of symbols so that develop the mimic as per required. When operator sees the screen he should know what’s going in plant.4. Alarm summery & Alarm history, SCADA system must be able to detect, display, and log alarms and events. When there are problems the SCADA system must notify the operators to take corrective action.5. Acquire real-time data as well as logs data with Real time trend & Historical time trend.6. Web Connectivity, Real-time displays can be accessed on remotely attached PCs and notebooks using internet.SCADA Programming shall be done so as operator can visualize and control complete WTP operation from operator desk. All important alarms & events shall be logged. All the data from field instruments & equipments shall be logged. There shall be provision to take reports in required formats of real time & historical data, events & alarms. There shall be provision of broadcasting messages, emails of reporting information. There shall be provision of access security.An Industrial grade Din rail mounting ethernet switch with 5 ports shall be provided. An Industrial grade modem with 4G/5G LTE connectivity shall be provided complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 124 | Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1200 mm X 700 mm X 1500mm (LBH), fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at WTP Plant (raw water monitoring, alum dosing control,clariffaculator operation & control, recirculation & mud pump operation). PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO DI –72 num ,DO – 40 num ,AI –12 num ,AO – 4 num 10 inch color TFT HMI complete with programming shall be provided to interact with PLC The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of WTP plant. MCB 16A DP – 3 num MCB 10A DP – 1 num MCB 4A DP – 4 num, 24 VDC Power Supply 10A – 1 num,Push Buttons – 30 num Selector Switch -16 num Control Contactor – 16 num Annunciator with 12 Windows NO to NC Type,Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num,Panel Light with Door Switch – 1 num Control Indication Lamp – 16 num Wiring + TB etc – 1 lot,Hardware – 1 lot. complete as per specification and directions of Site Engineer /Engineer-in-Charge. (PLC for other Instrument Contrl Except Filter Bed) |
| 125 | Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 &Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 5 years license. |
| 126 | Supply, Installation and commissioning of LT surge arrester having 5KA capacity with Spike and all accessories including cost of all materials, labour, T & P etc all complete. |
| 127 | 1TB SSD (Solid State Device) for RAM |
| 128 | Supply, Installation, Testing, Intgeration & Commissioning of 43\\" LCD monitor at Conf. Room for display of total water system (Online) complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 129 | Laserjet black & white Printer |
| 130 | Gigabit SFP to RJ45 Fibre multi Media Converter | Fibre to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fibre (Make - Delink or equivalent). |
| 131 | 24 port fiber optic panel or light interface unit (LIU) draw out Type |
| 132 | OFC Splicing with pigtails |
| 133 | Fibre Pigtail/patch cord 1 mtr |
| 134 | Laying of CAT-6 cable either in HDPE duct underground or GI wire support |
| 135 | Internet Modem with static IP for data communication |
| 136 | Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft.with IR Dome camera, control key board, DVR, Hard Disk, cables, UPT transreceivers etc. complete. Make- Hikvision, CP Plus, Evision, Honeywell with 4 nos camera,32 inch LED Screen |
| 137 | Supply, installation, testing & commissioning of Chemical earthing System with Backfill compound covered with earthpit and cover including transportation to site, unloading etc. all complete as per direction of Engineer-in-charge |
| 138 | Control Desk -1 no., Table - 1 no. & Chairs - 2 nos. at Control Room |
| 139 | Supply, Installation and commissioning of AC 1.5 Ton 5 Star and completed as per Engineering-In-Charge. |
| 140 | CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.2metres or below towards laying of 40mm dia HDPE pipe along water Pipeline including backfilling the trench, job complete in all respects, including all labour and materials complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 141 | Hot Dip Galvanised Tees for Cable Tray, |
| 142 | Hot Dip Galvanized Bends for Cable Tray |
| 143 | Supply, Installation and commissioning of cable tray 80mm width to wall, celling with necessary bracket, for laying of power and data cable etc. as per specification. all Complete Works. |
| 144 | Supplying,Installation & testing of network gateway(RTU), often including firewall, VPN, and traffic management features of (Firewall throughput 7000Mbps, Firewall IMIX - 2900Mbps, IPS throughput - 1355Mbps, Threat protection throughput - 330Mbps, Concurrent Connection - 1600000, New connection/sec - 44400, Xstream SSL/TLS Inspection - 420Mbps, Xstream SSL/TLS Concurrent connections - 81924G and comlpeted as per specification and Engineering_In-Charges. |
| 145 | Supplying,Installation & testing of 4G/5G Dual Sim LTE Router with 1 X LAN, 1 X WAN, RS485 on board with one at a time usage, WI-FI (802.11 b / g / n), 1 X Cellular Antenna, 1 X WIFI Antenna, Model- SW245 (RS485) Make- SWTPL and comlpeted as per Engineering_In-Charge. |
| 146 | Clear Water Pump House Automation includes supply, installation, testing, and commissioning of automated control systems with sensors, motorized valves, and SCADA integration for efficient, reliable, and remotely operated pumping operations. |
| 147 | CLEAR WATER PUMP AT WTP |
| 148 | Supplying, Fitting,fixing & Commissioning,of The body PN-16 and cover will be ASTM A536 Ductile lion can be integrated w ith PLC panel for operation with a minimum pressure in upstream 0.2 kglcm2 to a maximum pressure of 8 kglcm2. The valve seat shall be a solid, one-piece SS-316 desian and shall have a minimum five-degree taper on the se ating surf ace for a positive , drip-tight shut off. The diaphragm assembly shall contain a self-cleaning S5-303 stainless steel stem of sufficient diameter to withstand high hydraulic pressure differentials and shallbe fully guided atits both ends by a bearing in the main valve cover and an integral bearing in the valve seat, in order to be pr actically in balance along its fullift for limiting encessive friction, thus incre asing its ability| to react when performing a correction. The diaphragm shall not be usedias the seating surface and it shall be fully |supported by machined surfaces of the valve body or cover in its closed or opened position. In operating position, its inactive surface shall be completely supported for securing its maximum longevity. The control willbe achieved by, operating 2 number Solenoid Valves mounted on the main Valve. The Connecting tubing on the Main Valve willbe SS with |SS fiting from reputed companies makes. The flexible tubing on Main valves will not be allowed. of the approved make:(Make- Krohne marshal / E&H / Abb / Siemens Equivalent make with approval of authority) to control water supply, including cost of material with alltaxes transporatation to sitelstorage with insurance. |
| 149 | 300 mm |
| 150 | Pressure Transmitter :Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement along with snubber and needle valve, 1.0 sq.mm 2 core copper braided screen cable Wire, screw, grip & clamp for DI / MS pipe fitting.Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scaleor betterEnclosure- IP 68 all complete as per the direction of Engineer-in-charge. |
| 151 | Provision of Glycerine filled Pressure Gauge with fittings & isolation ball valve with socket including cost of all materials, Transportation to site etc all complete all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 152 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints etc. all Complete Works Screened cable unarmoured and all complete as per specification and the direction of Engineer-in-charge. |
| 153 | 1.5 sqmm 4 C CU AR Shielded Cable |
| 154 | 1.5 sqmm 2 CU AR Shielded Cable |
| 155 | Instrument Cable- 2 Pair 1.5 mm2 cable |
| 156 | HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/ equvalent) in cable trench or buried as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 157 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints etc. as per specification. all Complete Works Screened cable unarmoured. |
| 158 | CAT-6 Dlink cable |
| 159 | Supplying all materials,labour,t&p and fixing of PLC Compatable ATV930-VFD-160 KW, HEAVY DUTY 16AMP, WITH BREAKING UNIT VFD floormounted with Control Panel made out of 2MM C.R Powder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1 No ,RY Bindicator-1set, digital ammeter-1No digital volt meter- 1No, 4A control all complete as per specification and the direction of Engineer-in-charge. |
| 160 | 150 KW |
| 161 | CWR (Clear Water Reservoir) Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext.,Display - 4\\" LED ,Range- 0-10 mtr - 20 mtr.,Accuracy - +/- 0.25% of Full Scale or better ,Enclosure- IP 68 ,Mounting - On PLC panel. |
| 162 | Supply & installation of full-bore type electromagnetic water flow meter at various locations for monitoring volume of water flow, with following technical specification: Drinking Water Application, Liner:- Hard rubber, Process Connection:- PN10, St37-2/FE 410W B, flange EN1092, Electrodes:- 1.4435/3161, Calibration: 0.5%, Approval: Nonhazardous area Housing Field Alu, Sensor IP68 NEMA6P, Cable, Remote Version: 20 m coll and signal cable, Power Supply: 20-28VDC /11-40VDC Display: 2-line, push buttons, all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge Make- Krohne marshal / E&H / Abb / Siemens make |
| 163 | 400mm dia |
| 164 | Supply, installation, testing & commissioning of Chemical earthing System with Backfill compound covered with earthpit and cover including transportation to site, unloading etc. all complete as per direction of Engineer-in-charge |
| 165 | MCC Room Civil and Instrumentation at Zone-2 ESR location includes construction of MCC building, cable laying, panel installation, and integration of instrumentation systems for reliable and efficient control. |
| 166 | MCC ROOM INSTRUMATION AND CIVIL WORK at Zone-2 ESR Location |
| 167 | CONTROL ROOM PLC for ESR/Hill Top OGR and Distribution system OPERATION: Supply all material, labour T&P for installation & testing commissioning of PLC System of appropriate capacity & sufficient provision of digital & analog input and output to rum the plant & machineries within the campus limit, with minimum 20% spare cards, being operated locally at ESR campus, with provision of PLC operation (On & Off) of feed pump with respective Chlorine analyzer with an architecture of maintaining water quality in distribution pipeline at identified location. Complete operation of the feed pump depends upon the water quality communicated via point to point(P2P) signal from the remote analyzer unit to main PLC. Provision should be there for LIVE data communication (by agency) between the PLC panels through FO Cable for the operation (on & off) of clear water Well Pumps as per the water requirement . Local data storing facility should be there and for monitoring and analysis as per the user needs and report generation. (The Cost is inclusive of cost of materials, installation & successful commissioning etc) The PLC & all necessaries shall be of high standard make all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge. (Schneider/Siemens/Rockwell). |
| 168 | Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Rockwell) and cost for development of 24x7 distribution management system software, with Graphical processor visualisation Advanced alarm management, historical and Real time trending, Built-in-reporting, Stastical process control, Multithreaded citect VBA and Cicode programming language including installations of Desk top PC, Modem for receiving data etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 169 | Supply, Installation and commissioning of single phase 1KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance free battery system for 1hour backup including cables power plug, switch etc. all complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 170 | Supply, Installation and commissioning of Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares.PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 &Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 171 | Supply, Installation, Testing, Intgeration & Commissioning of 43\\" LCD monitor at Conf. Room for display of total water system (Online) complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 172 | Supply of 1TB SSD (Solid State Device) for RAM and complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 173 | Supply, Installation and commissioning of OFC Splicing with pigtails and complete as per specification and directions of Site Engineer /Engineer-in-Charg |
| 174 | Supply the Fibre Pigtail/patch cord 1 mtr and complete as per specification and directions of Site Engineer /Engineer-in-Charg |
| 175 | Supplying,Installation & testing of network gateway(RTU), often including firewall, VPN, and traffic management features of (Firewall throughput 7000Mbps, Firewall IMIX - 2900Mbps, IPS throughput - 1355Mbps, Threat protection throughput - 330Mbps, Concurrent Connection - 1600000, New connection/sec - 44400, Xstream SSL/TLS Inspection - 420Mbps, Xstream SSL/TLS Concurrent connections - 81924G and comlpeted as per specification and Engineering_In-Charges. |
| 176 | Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft.with IR Dome camera, control key board, DVR, Hard Disk, cables, UPT transreceivers etc. complete. Make- Hikvision, CP Plus, Evision, Honeywell and complete as per specification and directions of Site Engineer /Engineer-in-Charge |
| 177 | Supply, installation, testing & commissioning of Chemical earthing System with Backfill compound covered with earthpit and cover including transportation to site, unloading etc. all complete as per direction of Engineer-in-charge |
| 178 | Supply, Installation of Control Desk -1 no., Table - 1 no. & Chairs - 2 nos. at Control Room and completed as per Ingineering-In-Charge. |
| 179 | Supply, Installation and commissioning of AC 1.5 Ton 5 Star and completed as per Ingineering-In-Charge. |
| 180 | CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.2metres or below towards laying of 40mm dia HDPE pipe along water Pipeline including backfilling the trench, job complete in all respects, including all labour and materials and complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 181 | Supply, Installation and commissioning of Hot Dip Galvanised Tees for Cable Tray and complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 182 | Supply, Installation and commissioning of Hot Dip Galvanized Bends for Cable Tray and complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 183 | Supply, Installation and commissioning of cable tray 80mm width to wall, celling with necessary bracket, for laying of power and data cable etc.and complete as per specification and directions of Site Engineer /Engineer-in-Charge.. |
| 184 | Supply Installation of Laserjet Colour Printer and complete as per specification and directions of Site Engineer /Engineer-in-Charge.. |
| 185 | CIVIL Work For Automation |
| 186 | Design, Drawing and Construction of RCC frame structure with brickwork wall single store dbuilding(Control Center System Room, Electrical Sysstem Room, Toilet) for SCADA control room with Toilet block at intake & WTP site and 2no's UGR site, complete as per the direction of Engineer-in-charge.(40sqm x4 no's) |
| 187 | Distribution Automation at Zone-1 and Zone-2 includes supply, installation, testing, and commissioning of flow, pressure monitoring, and control systems with SCADA integration for efficient, reliable, and remote network management. |
| 188 | INSTRUMENTATION WORK AT DISTRUBUTION SITE |
| 189 | HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/ equvalent) in cable trench or buried as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 190 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints Screened cable unarmoured etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 191 | CAT-6 Dlink cable |
| 192 | Supply and installation of MS pipe including required numbers of bends and flanges and dismentaling joint etc required for installation of control units (i.e- Globe valve, flow meter, PG, PT etc.) and fiber cover over the arrangement fixing on CC(1:3:6) platform including cost of all materials, labour for fitting and fixing etc. all complete.as per site requirement and as per the direction of the engineer in charge.( excluding cost of Sluice valve, flow meter, PG, PT.) |
| 193 | 150 mm |
| 194 | 200 mm |
| 195 | 250 mm |
| 196 | 300 mm |
| 197 | Supply with fitting and fixing of of D.I. Mechanical Dismantling Joints for use to main uninterrupted water supply in the pipeline in case of repair of Flow meter as per specification and direction of Enginer - in - charge |
| 198 | 150 mm |
| 199 | 200 mm |
| 200 | 250 mm |
| 201 | 300 mm |
| 202 | CONTROL ROOM PLC for ESR/Hill Top OGR and Distribution system OPERATION: Supply all material, labour T&P for installation & testing commissioning of PLC System of appropriate capacity & sufficient provision of digital & analog input and output to rum the plant & machineries within the campus limit, with minimum 20% spare cards, being operated locally at ESR campus, with provision of PLC operation (On & Off) of feed pump with respective Chlorine analyzer with an architecture of maintaining water quality in distribution pipeline at identified location. Complete operation of the feed pump depends upon the water quality communicated via point to point(P2P) signal from the remote analyzer unit to main PLC. Provision should be there for LIVE data communication (by agency) between the PLC panels through FO Cable for the operation (on & off) of clear water Well Pumps as per the water requirement . Local data storing facility should be there and for monitoring and analysis as per the user needs and report generation. (The Cost is inclusive of cost of materials, installation & successful commissioning etc) The PLC & all necessaries shall be of high standard make all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge. (Schneider/Siemens/Rockwell). |
| 203 | Supply, Installation, Testing, Intgeration & Commissioning of 43\\" LCD monitor at Conf. Room for display of total water system (Online) complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 204 | Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Rockwell) and cost for development of 24x7 distribution management system software, with Graphical processor visualisation Advanced alarm management, historical and Real time trending, Built-in-reporting, Stastical process control, Multithreaded citect VBA and Cicode programming language including installations of Desk top PC, Modem for receiving data etc all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 205 | Supplying,Installation & testing of 4G/5G Dual Sim LTE Router with 1 X LAN, 1 X WAN, RS485 on board with one at a time usage, WI-FI (802.11 b / g / n), 1 X Cellular Antenna, 1 X WIFI Antenna, Model- SW245 (RS485) Make- SWTPL and comlpeted as per Ingineering_In-Charge. |
| 206 | Supply, Installation and commissioning of single phase 1KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance free battery system including cables power plug, switch having application in 24V lot DC Battery (drytype) charging to output continuous 3 hrs power backup all Complete Works and all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge |
| 207 | Supply, Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cablejoints etc. as per specification. all Complete Works Screened cable unarmoured and comlpeted as per Ingineering_In-Charge. (Make:- Finolex/L&T/Anchor/Havells/V-Guard/Equivalent Make with approval of the Authority) |
| 208 | 1.5 sqmm 4 C CU AR Shielded Cable |
| 209 | 1.5 sqmm 2 CU AR Shielded Cable |
| 210 | Instrument Cable- 2 Pair 1.5 mm2 cable |
| 211 | Supplying, Fitting,fixing & Commissioning,of The body PN-16 and cover will be ASTM A536 Ductile lion can be integrated w ith PLC panel for operation with a minimum pressure in upstream 0.2 kglcm2 to a maximum pressure of 8 kglcm2. The valve seat shall be a solid, one-piece SS-316 desian and shall have a minimum five-degree taper on the se ating surf ace for a positive , drip-tight shut off. The diaphragm assembly shall contain a self-cleaning S5-303 stainless steel stem of sufficient diameter to withstand high hydraulic pressure differentials and shallbe fully guided atits both ends by a bearing in the main valve cover and an integral bearing in the valve seat, in order to be pr actically in balance along its fullift for limiting encessive friction, thus incre asing its ability| to react when performing a correction. The diaphragm shall not be usedias the seating surface and it shall be fully |supported by machined surfaces of the valve body or cover in its closed or opened position. In operating position, its inactive surface shall be completely supported for securing its maximum longevity. The control willbe achieved by, operating 2 number Solenoid Valves mounted on the main Valve. The Connecting tubing on the Main Valve willbe SS with |SS fiting from reputed companies makes. The flexible tubing on Main valves will not be allowed. of the approved make:(Make- KROHNE MARSHALLIE&HIABBISIEMENS/Equivalent make with approval of authority) to control water supply, including cost of material with alltaxes transporatation to sitelstorage with insurance. |
| 212 | 150 mm |
| 213 | 200 mm |
| 214 | 250 mm |
| 215 | 300 mm |
| 216 | Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum with linear scale and all complete as per the direction of Engineer-in-charge. |
| 217 | Pressure Transmitter :Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement along with snubber and needle valve, 1.0 sq.mm 2 core copper braided screen cable Wire, screw, grip & clamp for DI / MS pipe fitting.Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scaleor betterEnclosure- IP 68 and all complete as per the direction of Engineer-in-charge. |
| 218 | Supplying all materials Labour & T&P for Fixing of DI tamper proof Kinatic Air Valve P.N 1.0 for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve and isolation valve all complete and as per the direction of Engineer-in-charge. |
| 219 | 50 mm dia |
| 220 | Supply, installation, testing & commissioning of online Chlorine Analyser with following technical specification. i.e.Single Channel free Chlorine Analyser, FRC sensor with 10 feet cable (with manual PH compensetion), Complete system pre mounted on plate with FTC sensors, Power supply110-240VAC, Transmitter wall /Panel mount type, Range FRC-0-10 ppm, Complete plate mounted system, (The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) and all complete as per the direction of Engineer-in-charge. make (Forbes Marshall/Tethys/Horiba/Hach) |
| 221 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab(chamber internal size:-[3.00x2.00x1.50mtr] for SCADA Instrumentation) and all complete as per the direction of Engineer-in-charge |
| 222 | Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext.,Display - 4\\" LED ,Range- 0-10 mtr - 20 mtr.,Accuracy - +/- 0.25% of Full Scale or better ,Enclosure- IP 68 ,Mounting - On PLC panel at ESR/UGR and all complete as per the direction of Engineer-in-charge |
| 223 | Supply & installation of full-bore type electromagnetic water flow meter at various locations for monitoring volume of water flow, with following technical specification: Drinking Water Application, Liner:- Hard rubber, Process Connection:- PN10, St37-2/FE 410W B, flange EN1092, Electrodes:- 1.4435/3161, Calibration: 0.5%, Approval: Nonhazardous area Housing Field Alu, Sensor IP68 NEMA6P, Cable, Remote Version: 20 m coll and signal cable, Power Supply: 20-28VDC /11-40VDC Display: 2-line, push buttons, all Complete Works as per specification and directions of Site Engineer / Engineer-in-Charge Make- KROHNE MARSHALL, E&H, ADEPT, ABB, SIEMENS |
| 224 | 150 mm dia |
| 225 | 200 mm dia |
| 226 | 250mm dia |
| 227 | 300mm dia |
| 228 | Supply, Installation, Testing and commissioning of Chlorine Dosing machine incluiding laying of pvc pipe interconnection with main waterline, Chemical storage and handling equipment etc. 0-500 Lph Zeroleakge pneumatic diapharm dosing pump - 2nos, one primary and one standby mode, pressure upto-10bar, 1000 Ltr Chemical tank capacity. Agitator motor - 1nos, strainer, NRV on Pump Outlet, Electrically actute Flow control Valve with PLC compatible VFD Panel for dosing pump and agitator etc. transportation & packaging including cost of materials, all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 229 | Earthing: Providing Electrical system system's earthing as per latest IS 3043, and the work shall include the following: Earthing electrodes comprising of GI pipe 40mm dia 2.9 mm thick 2.5 mtrs long with mesh covered funnel. Digging 300mm dia earthing pits to suitable depth for buring the main electrodes in the pit. The pit shall be filled with alternate layers of salt and charcoal 150mm thick around the pipe to the entire depth. An inspection chamber of 300x300x300mm size shall be constructed with CC 1:3:6 prop. The chamber shall be provided with CI/MS cover hinged to the frame. The Electrical Metering & switching , encloser electrical equipment shall be connected to the earth pit through 4 Sqmm Cu (green) for equipment/PLC earthiing. |
| 230 | Supplying all materials,labour,t&p and fixing of PLC Compatable ATV930-VFD, HEAVY DUTY 16AMP, WITH BREAKING UNIT VFD floormounted with Control Panel made out of 2MM C.R Powder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1 No ,RY Bindicator-1set, digital ammeter-1No digital volt meter- 1No, 4A control all complete as per specification and the direction of Engineer-in-charge. |
| 231 | upto 11 KW (Zone-1) |
| 232 | Way to Banapur Site |
| 233 | OFC: Supply and Laying of 12core unarmoured Optical fibre cable (OFC :fiber glass with F-G 62.5/125micron, 2.6DB/KM F600) to various sites through HDPE pipe, prelaying testing of nos cable drum for nos fibre and taking the OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer, blowing of OFC through previously laid HDPE, jointing / splicing of OFC, post installation testing of OFC for nos fibre for nos drum laid & taking OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ SiteEngineer as per the scope, specifications and directions of Engineer-in-charge/ Site Engineer. |
| 234 | Supply and Installation of OFC jointing kits as per drawings, specifications anddirections of Engineer-in-charge/Site Engineer. |
| 235 | Supply and laying of pre-cast RCC Joint Box 600mm dia, depth 600 with Iid as per specification and directions of Site Engineer / Engineer-inCharge. |
| 236 | HDPEPIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/ equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 237 | Pressure Transmitter :Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement along with snubber and needle valve, 1.0 sq.mm 2 core copper braided screen cable Wire, screw, grip & clamp for DI / MS pipe fitting.Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scaleor betterEnclosure- IP 68 and all complete as per the direction of Engineer-in-charge. |
| 238 | Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum with linear scale and all complete as per the direction of Engineer-in-charge. |
| 239 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab(chamber internal size:-[3.00x2.00x1.50mtr] for SCADA Instrumentation) and all complete as per the direction of Engineer-in-charge |
| 240 | Supply and installation of MS pipe including required numbers of bends and flanges and dismentaling joint etc required for installation of control units (i.e- Globe valve, flow meter, PG, PT etc.) and fiber cover over the arrangement fixing on CC(1:3:6) platform including cost of all materials, labour for fitting and fixing etc. all complete.as per site requirement and as per the direction of the engineer in charge.( excluding cost of Sluice valve, flow meter, PG, PT.) |
| 241 | 300 mm |
| 242 | Supplying, Fitting,fixing & Commissioning,of The body PN-16 and cover will be ASTM A536 Ductile lion can be integrated w ith PLC panel for operation with a minimum pressure in upstream 0.2 kglcm2 to a maximum pressure of 8 kglcm2. The valve seat shall be a solid, one-piece SS-316 desian and shall have a minimum five-degree taper on the se ating surf ace for a positive , drip-tight shut off. The diaphragm assembly shall contain a self-cleaning S5-303 stainless steel stem of sufficient diameter to withstand high hydraulic pressure differentials and shallbe fully guided atits both ends by a bearing in the main valve cover and an integral bearing in the valve seat, in order to be pr actically in balance along its fullift for limiting encessive friction, thus incre asing its ability| to react when performing a correction. The diaphragm shall not be usedias the seating surface and it shall be fully |supported by machined surfaces of the valve body or cover in its closed or opened position. In operating position, its inactive surface shall be completely supported for securing its maximum longevity. The control willbe achieved by, operating 2 number Solenoid Valves mounted on the main Valve. The Connecting tubing on the Main Valve willbe SS with |SS fiting from reputed companies makes. The flexible tubing on Main valves will not be allowed. of the approved make:(Make- Krohne marshal / E&H / Abb / Siemens make with approval of authority) to control water supply, including cost of material with alltaxes transporatation to sitelstorage with insurance. |
| 243 | 300 mm |
| 244 | Supplying,Installation & testing of 4G/5G Dual Sim LTE Router with 1 X LAN, 1 X WAN, RS485 on board with one at a time usage, WI-FI (802.11 b / g / n), 1 X Cellular Antenna, 1 X WIFI Antenna, Model- SW245 (RS485) Make- SWTPL and comlpeted as per Engineering_In-Charge. |
| 245 | Provision for installation of centrifugal pump set with interconnection arrangements at Zone-2 (Mamubhanja), including supply, installation, testing, and commissioning of two pumps, complete with suction and delivery manifolds, valves, fittings etc |
| 246 | Provision for Installation of Centifugal pump and VT Pump set with interconnection arrangements at Zone-2(Mamubhanja) and Intake |
| 247 | Providing, erecting and giving test of Centrifugal pump set conforming to IS 9079 operating at 2900 RPM with Bronze impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. |
| 248 | 35 HP (1W+1S),Q-194 Cum/hr,Head-34m |
| 249 | Supplying all materials, labour,t&p and fixing of PLC Compatable ATV 930 VFD , HEAVY DUTY 16AMP ,WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MMC. RPowder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1No,RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No, 4A control |
| 250 | VFD and Panel (Upto 30 kw - 2 nos.) |
| 251 | SITC of approved make V.T pump set at Intake of given capacity and head with VFD compatible, TEFC squirrel cage solid shaft induction motor working on 3- Phase 50 Hz ± 5%, 415 V ± 10%, complete set as per relevant IS and following material of Construction.(Discharge-563 cum/hr,Head-40 m). |
| 252 | 120 HP |
| 253 | Supplying all materials, labour,t&p and fixing of PLC Compatable ATV 930 VFD , HEAVY DUTY 16AMP ,WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MMC. RPowder coated sheet & alluminium Bus Barinter connected with copper wire and lugsh having 50KA-125A MCCB including spreader link and extended ROM-1No,RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No, 4A control |
| 254 | VFD and Panel (Upto 90 kw) |
| 255 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 256 | Pumping Arrangement |
| 257 | 200mm dia M.S.Pipe (6.30mm thick) |
| 258 | 200mm dia M.S. Flange.(12mm thick) |
| 259 | 200mm dia x 90' M.S. Bend |
| 260 | 200mm dia M.S. Flange Joint |
| 261 | 250mm dia M.S.Pipe (6.30mm thick) |
| 262 | 250mm dia M.S. Flange.(12mm thick) |
| 263 | 250mm dia x 90' M.S. Bend |
| 264 | 250 mm dia M.S. Flange Joint |
| 265 | 350mm dia M.S.Pipe (8mm thick) |
| 266 | 350mm dia M.S. Flange.(16mm thick) |
| 267 | 350mm dia M.S. Flange Joint |
| 268 | 350mm dia x 90' M.S. Bend |
| 269 | 400mm dia M.S. Flange Joint |
| 270 | 400mm dia M.S.Pipe (8.8mm thick) |
| 271 | 400mm dia M.S. Flange.(16mm thick) |
| 272 | 400mm dia x 90' M.S. Bend |
| 273 | Supplying all labour and T&P for cutting of following dia MS pipe of 8mm thick in treanches by Flame cutting set of pocket etc all complete |
| 274 | Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete |
| 275 | Supplying all materials Labour & T & P for Fixing Ductile Iron Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve . |
| 276 | 200mm dia D/F Sluice Valve (PN1.6) Vag/Talis make |
| 277 | 250mm dia D/F Sluice Valve (PN1.6) Vag/Talis make |
| 278 | 200 MM NRV |
| 279 | Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement. |
| 280 | Supply installation testing & commissioning of Float Control valve to the fixed in UGR/OGR to shutup the incoming flow after filled up the reservoir & open automatically when water receeds in a particular level etc. complete as per direction of Engineer in charge. |
| 281 | 250mm dia - |
| 282 | Construction of OGR at Zone-2 with 600 KL capacity, construction of a boundary wall and overall site development. |
| 283 | Supplying all materials, labour, t&p and design, construction, testing & commisioning of R.C.C Reservoir/ R.C.C ESR and piping arrangement up tp 50 Running meter from external face , Raft foundation including all work such as soil investigation, earth work in excavation, back filling & disposal of earth, RCC & PCC of required grade, centering and shuttering, brick work, painting, finishing, connection pipes valves fitting, expansion joint, mechanical level indicator etc with lead of all materials to site. |
| 284 | Proposed UGR Zone-2 (600 KL). |
| 285 | RCC Boundary Wall at Proposed UGR Site |
| 286 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014cum in volume within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department(30*.20*30) |
| 287 | 5 Years Maintenance Estimate (AUTOMATION AND SCADA SYSTEM O & M) |
| 288 | Automation and SCADA systems enhance water supply operations through real-time monitoring and remote control of equipment. They improve efficiency, reduce manual intervention, and enable quick responses to faults. These systems ensure reliable water distribution, optimize resource usage, and support preventive maintenance across treatment plants and distribution networks. |
| 289 | 1st Year |
| 290 | 2nd Year |
| 291 | 3rd Year |
| 292 | 4th Year |
| 293 | 5th Year Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
