|
| 1 | REPAIR TO BOOK CASE /SIDE BOARD/ BIN SOILED LINEN MULTI PURPOSE, (FD-26/241) , (FD-287) , FD/E6/MAP/09, FD-1112 |
| 2 | Removing the existing unserviceable/ broken shutter of side board and S&F New shutter of size 400x650mm made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina fixed with 40 mm wide chromium plated continuous piano hinges including CP handle, 100 mm long,01 Nos knob and magnetic catcher to stick the doors. Edges of the Shutters to be covered PVC beading 2mm thick machine pressed all around, and shown in drawing and complete all as specified and as directed by the Engineer-in-Charge. NOTE : Each leaf to be measured separately |
| 3 | Removing the unserviceable broken back ply of side board and S&F New 6 mm thick BWP grade plywood conforming to IS: 710 and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Removing the unserviceable/ broken drawers of side board and S&F New drawers made of front 18 mm thick prelaminated MDF Board exterior Grade as per existing shade both one side laminated and other side white balancing paper rest all the sides bottom etc to be made out of 12mm thick PLMDF Board exterior grade,also fixing of 40 mm knob of matching colour as per shade of Board, alongwith one set of telescopic channel existing and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Removing the unserviceable handle made from Stainless steel of appropriate size in Side board and bin linen multipurpose as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | REPAIR TO CHAIR EASY (FD-17(M),202 & 229) |
| 8 | Removing the existing unsv/broken rear leg and S&F 1st class hard wood rear leg and shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 9 | Removing the existing unserviceable/ broken front leg and S&F1st class hard wood front leg complete all shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 10 | Removing the existing unserviceable/ broken arm rest and S&F 1st class hard wood arm rest complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each arms shall be rest measured separately |
| 11 | M&L for preparation of surfaces of chair easy (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 12 | REPAIR TO CHAIR DINNING ,(FD-16,FD-228 & FD- 279) |
| 13 | Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard wood rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.Note : Each leg shall be measured separately |
| 14 | Removing the existing unserviceable/ broken front leg and S&F 1st class hard wood front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 15 | Removing the existing unserviceable/ broken Side batterns if broken and canning and S&F 1st class hard wood battern and S&F PVC Seat instead of canning complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Removal of unserviceable back rest batten and S&F new back rest batten made out of 1st class hard wood of size as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for preparation of surfaces of chair dining (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 18 | REPAIR TO CHAIR WRITING ,(FD-20, FD-250 & FD- 280) |
| 19 | Removing the existing unserviceable/ broken rear leg and supplying and fixing 1st class hard wood rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 20 | Removing the existing unserviceable/ broken front leg and S&F 1st class hard wood front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 21 | Removing the existing unserviceable/broken arm rest and S&F 1st class hard wood arm rest complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each arm shall be rest measured separately |
| 22 | M&L for preparation of surfaces of chair writing (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by Spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 23 | REAPIR TO CHAIR DINNING WITH PVC SEAT (FD/MAP-II/05) |
| 24 | Removing the existing unserviceable/Broken rear leg and S&F 1st class hard wood rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 25 | Removing the existing unserviceable/ broken front leg and S&F 1st class hard wood front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 26 | Removing the existing unserviceable/ broken PVC Seat of Chair Dining and S&F new PVC Seat complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Make : Cello / Brite/ Swastic/Harmony as Approved by GE. |
| 27 | Removal of unserviceable back rest batten and S&F new back rest batten made out of 1st class hard wood of size as per drawingg and complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | M&L for preparation of surfaces of Chair Dining with PVC Seat (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 29 | REPAIR TO CHAIR DINNING CUSHIONED (FD/MAP-II/04)(FD/E6/MAP/10R |
| 30 | Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X450X75mm thick, density 40 Kg/cum with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | Removing the existing unserviceable/Broken rear leg and S&F 1st class hard wood rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 32 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately |
| 33 | M&L for preparation of surfaces of Chair Dining cushioned (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 34 | REPAIR TO CHAIR Dining LONG BACK (FD-357) |
| 35 | M&L for removing of old broken front leg of chair Dining Long back and S&F new components made out of 1st class wood without crack and knots of similar size,shape,plained and fixed with wood pinning and fevicol as under |
| 36 | Front/Side/Rear rail as specified in drg |
| 37 | Cushioned back with tapestry cloth as specified in drg |
| 38 | Cushioned Seat with tapestry cloth as specified in drg |
| 39 | M&L for preparation of surfaces of Chair Dining long back (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 40 | COMMON ITEMS FOR CHAIRS ,(FD-FD-17,20,250 & 280) (FD-16,228 & FD- 279) (FD-202, 229) |
| 41 | Removing the existing unserviceable/ broken plastic cane and S&F canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair of all types including couch with detachable chair, bin soiled linen, stool dressing complete as per Godrej pattern complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | S&F stiffeners for chairs made out of 25 X 25 mm 1st class hard wood after removing the existing unserviceable stiffeners complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | REPAIRS TO SOFA SET 1/3/4/5 SEATER SEAT (FD-281/373) |
| 44 | Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. Note: The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM. |
| 45 | Replacement of cover of tapestry cloth of cushion of sofa and S&F new cover of tapestry cloth on existing foam cushion with Velcro on one edge of best quality. cloth not less than 350/- per RM, Shade and texture to be got approved before bulk stiching and complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Removing unserviceable long rail of seat or back side of three seater sofa set and S&F new long rail made out of first class Hard Wood of size 1590x100x35mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Removing unserviceable short rail of any side of sofa set 4/5 seater and S&F new short rail made out of first class Hard Wood of size 525x100x35mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Removing unserviceable wooden bearer of any side of sofa set 4/5 seater and supply and fix new wooden bearer made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Removing unserviceable wooden Arm of any side of sofa set 4/5 seater and S&F new wooden Arm made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. . |
| 50 | M&L for preparation of surfaces of sofa set 5 seater (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 51 | M&L for preparation of surfaces of sofa set 4 seater (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 52 | REPAIR TO TABLE DINING 6/8 PERSON (FD-273/FD-255/FD/MAP-II/03) |
| 53 | Removing the existing unserviceable/ broken top of Table dining 6 person and S&F new top of 1500x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | Removing the existing unserviceable/ broken top of Table dining 8 person and S&F new top of 1800x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | Removing the existing unserviceable/ broken top long rail of Table dining 6 person and S&F new long rail made of 1st class hard wood of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | Removing the existing unserviceable/broken top short rail of Table dining 6 person and S&F new short rail made of 1st class hard wood of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Removing the existing unserviceable/ broken leg of Table dining 6 person and S&F new leg made of 1st class hard wood all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | M&L for preparation of surfaces of Table Dining (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 59 | REPAIR TO TABLE DRESSING LADIES, FD-32/251 & 378/FD/MAP-II/07) |
| 60 | Removing the existing unserviceable/ broken drawers of Table dressing ladies and S&F new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWR grade plywood duly fixed with aluminium anodised knobs 40 mm complete all as per existing and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing ladies and S&F new mirror minimum 5 mm thick suitable for the existing frame alongwith 6mm thick BWR grade plywood back all as per existing and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | Removing the existing unsv/broken any sides of Table Dressing ladies and S&F in repair new sides made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Preparation of old surface and Melamine polishing to Table dressing ladies except laminated portion complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Table Dressing Gents with Mirror FD-230: |
| 65 | M&L for removing old unserviceable broken looking mirror and S&F new looking mirror of size 760 x 380, 5.5 mm thick duly framed made out of Ist class teak wood without crack and knots of size 25 x 20 mm & 6mm thick commercial ply on back and supported with batten 35 x 25mm all as specified in drawing |
| 66 | M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated MDF board 18 MM Thick with drawer complete all as per drawing (back shall be 12 mm ply) |
| 67 | M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engr-in-Charge |
| 68 | REPAIR TO TABLE DINING 4 PERSON 1200 x 900MM , FD-273, FD/MAP-II/03 |
| 69 | Removing the existing unserviceable/ broken top of Table dining 4 person and supply and fix new top of 1200x900mmx18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | Removing the unserviceable /broken legs of table dining and S&F new leg made of 1st class hard wood all as specified as shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. Note :- each leg will be measured separatel |
| 71 | All as per srl item No. 14.02 here-in-before above but top long rails of table dining Note :- Each rail will be measured separately |
| 72 | All as per srl item No. 14.02 here-in-before above but top short rails of table dining Note :- Each rail will be measured separately |
| 73 | M&L for preparation of surfaces of Table Dining (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 74 | REPAIR TO TABLE 900x600x760 MM WITH AND W/O DRAWER, FD-42M/41/224/283 |
| 75 | Removal of unserviceable top and S&F new top made out of18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF Board to be fixed with 4mm thick Half round Bidding duly polished all around with matching colour complete all as specified and as directed by the Engineer-in-Charge. |
| 76 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for table of size complete all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 77 | Removal of unserviceable top long rail and S&F new front top long rail made out of 1st class hard wood for table of size all as per drawing and as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Removal of unserviceable top short rail and S&F new front top long rail made out of 1st class hard wood for table of size all as per drawing and as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 79 | Removal of unserviceable stiffener Complete under the top and S&F new long stiffener made out of 1st class hard wood for table of size all as per drg and complete all as per specification and directed. |
| 80 | Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approved quality and including one set of powder coated telescopic channels to move the drawers all as per drawing and all as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | M&L for preparation of surfaces of Table 3 x 2 (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 82 | REPAIR TO TABLE BED SIDE ( FD-276, 248) |
| 83 | Removal unserviceable plywood at back of table bed side and S&F plywood 6mm thick BWR Gde as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Removal of unserviceable Top and S&F new top of size 230mm X 450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/ Mehogany/Wall nut chest shade with edges covered with 4mm thick Half round Bidding duly polished complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | M&L for Melamine polishing of complete table exposed to view except laminated portion per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | REPAIR TO TABLE WRITING (FD- 33, 249 & 275) |
| 87 | Removal of unserviceable top and S&F new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) with 4mm thick Half round Bidding duly polished the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | Removal of unserviceable leg and S&F new leg made out of 1st class hard wood as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 89 | Removal of unserviceable knob/handle of drawer from front shutter of cabinet and S&F new aluminium anodised knob/ handle heavy duty of quality as per sample available as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde)plywood at the bottom of drawer over one set of powder coated telescopic channels to move the drawers all as per drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 91 | M&L for preparation of surfaces of Table writing (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 92 | REPAIR TO TABLE CENTRE (FD-274) |
| 93 | Removing the existing unserviceable top of table centre and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with half round wood beading of thickness 4mm duly french polished to match the existing surfaces of repaired table centre of uniform shade complete all as specified shown on drawing and as directed by the Engineer-in-Charge. . |
| 94 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for table centre of appropriate size as shown on drawing all as specified and as directed by the Engineer-in-Charge. |
| 95 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood fornt for long rail of table centre. |
| 96 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Short rail of table centre. |
| 97 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Stiffeners (complete H type) of table centre. |
| 98 | M&L for preparation of surfaces of Table centre (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 99 | REPAIRS TO CHAIR REVOLVING (TP)/DK-6001/DK-1101/DK-6101/DEC-1077N |
| 100 | Removing the existing unserviceable arm rest and S&F New armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane(PU) reinforced with MS insert scratch complete all as specified and as directed by the Engineer-in-Charge. |
| 101 | Removing unserviceable Seat of chair Revolving and S&F New Seat 50-55mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardness over ready made plywood base of 12mm thick and duly covered with tapestry/ leatherite (as directed by Engineer -in- Charge) cloth not less than 350/- per RM and PVC liping complete all as specified and as directed by the Engineer-in-Charge. Note :- Design/ Moulding of seat should be as per trade pattern and as directed by Engineer- in- Charge |
| 102 | Removing unserviceable back of chair Revolving and S&F New Seat 50-55mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardness over ready made plywood base of 12mm thick and duly covered with tapestry/ leatherite (as directed by Engineer -in- Charge) cloth not less than 350/- per RM and PVC liping complete all as specified and as directed by the Engineer-in-Charge. Note :- Design/ Moulding of seat should be as per trade pattern and as directed by Engineer- in- Charge |
| 103 | Removing unserviceable castor wheels of chair revolving and S&F new castor wheels of chair complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | Removing unserviceable Pedestal made of stainless steel for chair revolving and S&F new Pedestal of chair complete all as specified and as directed by the Engineer-in-Charge. |
| 105 | Removing unseviceable gas lift mechanism/hydrolic shocker and S&F New SS gas lift hydrolic mech of the chair revolving as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 106 | Chair Visitor with arms cushioned (TP)/ DVC 8003 |
| 107 | Removing unserviceable Seat of chair visitor and Supply and Fix new Seat 50-55 mm thick polyurethane foam(PU) moulded with density 50 kg per cubic metre thick and hardness over readymade plywood base of 12mm thick BWR Grade and duly covered with tapestry cloth not less than 350/- per RM and PVC lipping all as specified and directed. Texture and shade of the tapestry to be got approved by GE before bulk repairs complete all as specified and as directed by the Engineer-in-Charge |
| 108 | Removing unserviceable back of chair visitor and Supply and Fix new back 50-55 mm thick (PU) polyurethane foam moulded with density 50-55kg per cubic metre thick and hardness over readymade plywood base of 12mm thick BWR Grade and duly covered with tapestry cloth not less than 350/- per RM all as per drg and as specified. Texture and shade of the tapestry to be got approved by GE before bulk manufacturecomplete all as specified and as directed by the Engineer-in-Charge. |
| 109 | Removing the existing unserviceable arm rest and S&F New armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane(PU) /wooden duly painted reinforced with MS insert scratch complete all as specified and as directed by the Engineer-in-Charge. |
| 110 | PEG TABLE (FD - 277, FD - 384) |
| 111 | Removing the existing unserviceable top of table peg and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with half round wood beading of thickness 4mm duly french polished to match the existing surfaces of repaired table peg uniform shade complete all as specified shown on drawing and as directed by the Engineer-in-Charge. |
| 112 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for table peg of appropriate size as shown on drawing all as specified and as directed by the Engineer-in-Charge. |
| 113 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood fornt for long rail of table centre peg table. |
| 114 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Short rail of peg table. |
| 115 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Stiffeners (complete H type) of peg table |
| 116 | M&L for preparation of surfaces of Table Peg (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 117 | Teapoy Wooden (FD - 278, FD - 382) |
| 118 | Removing the existing unserviceable top of Teapoy wooden and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with half round wood beading of thickness 4mm duly french polished to match the existing surfaces of repaired table peg uniform shade complete all as specified shown on drawing and as directed by the Engineer-in-Charge. |
| 119 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for teapoy wooden of appropriate size as shown on drawing all as specified and as directed by the Engineer-in-Charge. |
| 120 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood fornt for long rail of table centre Teapoy wooden. |
| 121 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Short rail of Teapoy wooden. |
| 122 | Removal of unserviceable leg and S&F new leg made of 1st class hard wood for for Stiffeners (complete H type) of Tepoay woodn. |
| 123 | M&L for preparation of surfaces of Teapoy wooden (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 124 | REPAIR TO BED PLY WOOD TOP (FD-21/245/246) |
| 125 | Removing the existing unserviceable/ broken long rail and supplying and fixing new 1st class hard wood long rail for charpoy wooden including French polishing all as specified and shown on Drg (Each long rail shall be measured separately). |
| 126 | Removing the existing unserviceable/broken head board including legs and supply & fixing new head board for bed ply wood top including wood legs and French polishing complete all as specified and shown on drg |
| 127 | Removing the existing unserviceable /broken foot board including legs and supply & fixing new foot board for bed plywood top including wood legs and French polishing complete all as specified and shown on Drgs. |
| 128 | Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood exterior grade complete all as shown on Drg and as specified. |
| 129 | M&L for preparation of surfaces of Bed Hard wooden (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 130 | Table Bed side MAP (FD/E6/MAP/15R) |
| 131 | M&L for removing of old broken top of table bed side MAP and S&F new top made out 18mm thick prelaminated MDF board exterior grade (ISI Marked) with 25 mm projection and PVC beading fixed to open sides. All as shown in drg and as directed by Engr-in Charge. |
| 132 | M&L for removing of old broken side purlin of table bed side MAP and S&F new side purlin made out 18mm thick prelaminated MDF board exterior grade (ISI marked). All as shown in drg and as directed by Engr-in Charge. |
| 133 | M&L for removing of old broken upper drawer of Table bed Side MAP and S&F new Upper drawer of tabler bed side MAP made out 18mm thick prelaminated MDF board including goog quality of telescopic channel rest as shown in drg and directed by Engr-in-Charge. |
| 134 | M&L for removing of old broken Lower drawer of Table Bed Saide MAP and S&F new Lower drawer of tabler bed side MAP made out 18mm thick prelaminated MDF board ncluding goog quality of telescopic channel rest as shown in drg and directed by Engr-in-Charge. |
| 135 | M&L for removing of old U/s back side of Table Bed Saide MAP and S&F new Back side of tabler bed side MAP made out 12mm thick Ply wood BWR Grade (ISI Marked), rest as shown in drg and directed by Engr-in-Charge. |
| 136 | M&L for removing of old U/s MS tube frame of Table Bed Saide MAP and S&F new MS frame of tabler bed side MAP made out 18 x 18mm, 18 Gauge MS Square pipe, rest as shown in drg and directed by Engr-in-Charge. |
| 137 | Supply and fix copper oxidised steel Handle for Table Bed Side MAP. All as shown in drg and as directed by Engr-in-Charge. |
| 138 | TABLE COMPUTER (FD/E6/MAP/03) |
| 139 | Removing the existing TOP of table computer 900x600mm and S&F new top of same size made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 140 | Removing the existing any kind of unserviceable MDF Board Shelf and S&F new shelf of size 450x300mm made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 141 | Removing unserviceable existing keyboard tray of table computer and Supply and Fix new key board tray of size 480mmx300mm duly made up of 18 mm thick pre laminated MDF board alongwith Telescopic channel. The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 142 | Removing unserviceable drawers of table computer and S&F new drawer of size made up of 12 & 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed.alongwith telescopic channel The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing all as directed by GE/Engr-in-Charge |
| 143 | REPAIRS TO TRESTLE WOODEN (FD-96M) |
| 144 | M&L for smoothening surfaces with sand paper of Trestle wooden and repainting the old painted surface with one coat of synthetic enamel paint black colour complete all as specified and directed. |
| 145 | REPAIRS TO RACK RIFLE 10/12 Rifles HQ/134/22/F/89 |
| 146 | M&L for preparation of surfaces of Rack Rifle (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying sealer and two or more coat of Melamine polish by spray machine (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge |
| 147 | REPAIRS TO HAT STAND WITH MIRROR FD-233/361/362 |
| 148 | Removing unsv Veeneerply from Hat stand and S&F new Veneerply shade of size 1000x700mm of BWR Grade |
| 149 | Removing unsv mirror and S&F new mirror of size 450x300mm conforming to IS 2553(Part 1) 2018 of Make Modi Guard/Saint Gobain/Atul/Swastic |
| 150 | Removing unsv pegs and S&F new pegs made of brass for hanging Hat complete all as specified and directed. |
| 151 | Removing existing unsv beading and S&F new beading all around the Hat as shown in Drg |
| 152 | M&L for smoothening surfaces with sand paper of Hat stand and polishing the old polished surface with two coats of Melamine polish by spray machine complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
