|
| 1 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electrograde copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 2 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 2500GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electrograde copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 2500GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electrograde copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 4 | Repair and maintenance of 20 HP / 22.5 HP Motor suitable for 2500GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electrograde copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 5 | Charges for lowering of different capacity submersible pump motor set along with column pipe assembly with all acessories as required in the existing DTW including carrying pump motor set from the workshop in around of udaipur to the existing DTW in different location, complete as per direction of the Engineer-in-charge. |
| 6 | charges for lifting of different capacity of single phrase and 3(three) phrase submersible pump motorset alongwith column pipe assembly with all accessories from the existing DTW and carrying from DTW to the workshop in around of udaipur etc.complete as per direction of the Engineer-in-charge. |
| 7 | Repair and maintenance of 2500 GPH capacity submersible pump set by complete dismantling including providing & fitting fixing of PVC of all necessary spare parts (conforming to IS : 8034) and reassembling the same including servicing & necessary trial run as per specification and direction of the Engineer-in-charge. i. Bronze/SS Impeller |
| 8 | ii. Bronze grade LTB 2 / Cutless rubber bush |
| 9 | iii. Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 10 | iv. Stainless steel pump shaft |
| 11 | v. Cast iron grade (FG200) discharge casing |
| 12 | vi. Cast iron grade (FG200) suction casing |
| 13 | vii. Cast iron grade (FG200) pump bowl/diffuser |
| 14 | viii. SS Impeller lock |
| 15 | ix.SS half coupling |
| 16 | x. Stud bolt & nut |
| 17 | xi. Dismantling, repairing, reassembling, servicing |
| 18 | Repair and maintenance of 5000 GPH capacity submersible pump set by complete dismantling including providing & fitting fixing of PVC of all necessary spare parts (conforming to IS : 8034) and reassembling the same including servicing & necessary trial run as per specification and direction of the Engineer-in-charge. i. Bronze/SS Impeller |
| 19 | ii. Bronze grade LTB 2 / Cutless rubber bush |
| 20 | iii. Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 21 | iv. Stainless steel pump shaft |
| 22 | v. Cast iron grade (FG200) discharge casing |
| 23 | vi. Cast iron grade (FG200) suction casing |
| 24 | vii. Cast iron grade (FG200) pump bowl/diffuser |
| 25 | viii. SS Impeller lock |
| 26 | ix.SS half coupling |
| 27 | x. Stud bolt & nut |
| 28 | xi. Dismantling, repairing, reassembling, servicing |
| 29 | Repair and maintenance of 7500/10000 GPH capacity submersible pump set by complete dismantling including providing & fitting fixing of PVC of all necessary spare parts (conforming to IS : 8034) and reassembling the same including servicing & necessary trial run as per specification and direction of the Engineer-in-charge. i. Bronze/SS Impeller |
| 30 | ii. Bronze grade LTB 2 / Cutless rubber bush |
| 31 | iii. Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 32 | iv. Stainless steel pump shaft |
| 33 | v. Cast iron grade (FG200) discharge casing |
| 34 | vi. Cast iron grade (FG200) suction casing |
| 35 | vii. Cast iron grade (FG200) pump bowl/diffuser |
| 36 | viii. SS Impeller lock |
| 37 | ix.SS half coupling |
| 38 | x. Stud bolt & nut |
| 39 | xi. Dismantling, repairing, reassembling, servicing |
| 40 | Repair and maintenance of Submersible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electrograde copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 41 | 2.0 HP Motor suitable for 2000 GPH capacity submersible pumpset. Please Enable Macros to View BoQ information |
