|
| 1 | REPAIRS TO ALMIRAH STEEL LARGE/ MEDIUM (FD-67M, 1031) |
| 2 | Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | S&F New 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Medium steel including removing the existing unserviceable lock complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Removing unserviceable legs and S&F New leg of Almirah large steel made of 1mm thick CRCA sheet bend to shape duly painted including one coat of red oxide primer and fix with Gas welding as shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | All as per item No 1.03 here-in-before above but leg of Almirah medium steel. |
| 6 | Removing unserviceable 3 way locking device from Alimarh large steel and fixing New locking device complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | All as per item No 1.05 here-in-before above but of Almirah medium steel. |
| 8 | M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm for foot rest of almirah large steel by gas welding wherever required complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Removing of old paint completely from surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | All as per item No 1.08 here-in-before above but of Almirah medium steel. |
| 11 | Locker Bedside steel (FD-1029) |
| 12 | Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size for Locker steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | S&F New Hasp & staple for Locker bedside steel including removing the existing unserviceable complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Removing of old paint completely from surfaces of Locker bedside steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | REPAIRS TO CHAIR VERANDAH (FD-359 & 256)/(FD/MAP-II/06) |
| 16 | Removing the existing unserviceable/ plastic cane, from chair verandah and S & F new PVC Seat and Back made of PPCP material 4mm thick complete all as specified and as directed by the Engineer-in-Charge. Make : AMKO/SWASTIC/HARMONY |
| 17 | Preparing the existing steel surfaces and spray panting including one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah and including taking down old shoes and shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220) |
| 19 | M&L for tightening of loose charpoys GI after removing of the existing unserviceable ply wood and S&F 12mm thick plywood, BWP grade, conforming to IS :710 ISI marked alongwith two iron stiffeners 900x25x3mm with 08 Nos Nut Bolt complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE. |
| 20 | Removing the existing unserviceable / broken long rail 32mm dia and S&F New long rail for charpoy GI Pipe medium grade complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Preparing short rail from broken long rail obtained from Serial item No 4.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Preparing leg of GI Charpoy made from old long/short rail obtained from Serial item No 4.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | S&F GI 3 way elbow 32mm bore, ISI marked, length not less than 65mm in each way including dismantling of old GI elbow complete all as specified and as directed by the Engineer-in-Charge. . |
| 24 | S&F GI check nut, 5mm thick suitable for 32mm GI pipe (ISI Marked) including dismantling of unserviceable check nut complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Preparing the existing steel surfaces by scrapping with sand paper and painted with two coats of synthetic enamel paint of silver colour over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | CHARPOY IP HARD TOP (FD/MAP-II/01 ) |
| 27 | Removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightening of MS Pipes thereafter preparation of old surface by sand paper No 50 and wire brush and applying one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Removing the existing unserviceable /broken ply wood top and S&F New 12mm thick BWP plywood conforming to IS: 710 top ISI marked alongwith countersunk screws bolted on the stiffeners 08 in Nos all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE. |
| 29 | Preparation of steel surfaces of Charpoy IP and applying two coats of synthetic enamel paint of black colour complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | S & F new shoe of charpoy complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | REPAIRS TO CHAIR WRITING OFFICERS (FD/E6/MAP/12) |
| 32 | Removing the existing unserviceable PVC arm rest and S&F New PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | Removing unserviceable Seat of chair writing and Supply and Fix new Seat moulded with 50/55 mm thick polyurethane foam(PU) 50-55kg per cubic metre density and hardness pasted over 12mm hot pressed plywood and duly covered with tapestry cloth/fabric not less than 250/- per RM complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | Removing unserviceable Seat of chair writing and Supply and Fix new Back moulded with 50/55 mm thick polyurethane foam(PU) 50-55kg per cubic metre density and hardness pasted over 12mm hot pressed plywood and duly covered with tapestry cloth/fabric not less than 250/- per RM complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | Removing unserviceable shoe of chair writing and S&F new shoe of chair complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | TABLE DINING ORS STEEL (FD-165M) |
| 37 | Cleanliness/Preparation of surface and painting of complete lower M.S frame and applying two coat of synthetic enamelled paint of black colour complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Removal of unserviceable Top of table and S&F New top of size 1800x600x18mm made out of 18 mm thick plain MDF board exterior grade confirming to IS:14587: 1998 covered from all side with Aluminium sheet 22 gauge thick covered all-round, top fixed with steel screw of required size complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | Removal of unserviceable PVC shoe and S&F New PVC shoe suitable for MS pipe 25mm square complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | TABLE OFFICE OFFICER/ CLERK/ TYPIST STEEL (FD-84/1004/1003) |
| 41 | Removing the existing unserviceable/ broken top of steel table office offrs and S&F new table top of 1370 X 760 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | Removing the existing unserviceable/ broken top of steel table office clerk and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Removing the existing unserviceable/ damaged drawers of table office offrs steel/ table clk steel and S&F New drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | Removing the existing unserviceable lock and S&F New brass lock of 50mm 4 lever with duplicate keys complete all as specified and as directed by the Engineer-in-Charge. Make :- Harrison/Link/Godrej as approved by GE. |
| 45 | Preparation of old painted surfaces of tables internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even applying one coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. . |
| 46 | TABLE (900x600) STEELWITHOUT/WITH DRAWER (FD-1007/1008) |
| 47 | Removing the existing unserviceable/ broken top of steel table and S&F new table top of 900 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Removing the existing unserviceable/ damaged drawer of table 900x600 and S&F New drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Removing the existing unserviceable lock and S&F New lock of size 65mm 6 lever with duplicate keys complete all as specified and as directed by the Engineer-in-Charge. Make :- Harrison/Link/Godrej as approved by GE. |
| 50 | Preparing steel surface of table and applying one coat of synthetic enamel paint by spray painting as per shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | Teapoy verandah (FD-383/FD/E6/MAP/17) |
| 52 | Removing the existing unserviceable top and S&F 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade of size 450mmx450mm with 2 mm thick PVC edging all round complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | Preparing old painted steel surfaces of frame and applying one coat of black/ White synthetic enamel paint including removing the unserviceable rubber shoes and S&F New of same size rubber shoes complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | Repairs to Trestle store room Iron (FD-86M) |
| 55 | M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of Trestle store room Iron by arc welding wherever required complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | M&L for preparation of old painted surfaces of trestle No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
