|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 m in depth in any type of soft and loose soil complete all as specified. |
| 2 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm complete all as specified. |
| 3 | Removing excavated material not exc 50 meters and depositing where directed at a level not exc 1.5 m above the statring point. |
| 4 | Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints of 200mm size including burning out joints and recovering lead |
| 5 | All as per item srl No. 4 above, But 150 mm dia. |
| 6 | Taking down old unserviceable Valves, Sluice 200 mm (8”) dia |
| 7 | Taking down old unserviceable Valves, Sluice 150 mm (6”) dia |
| 8 | Taking down old unserviceable Air release valve 200 mm (8”) dia |
| 9 | Taking down old unserviceable Air release valve 150 mm dia |
| 10 | Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” ,200 mm (8\\") dia complete all as specified and directed. |
| 11 | Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” ,150 mm (6\\") dia complete all as specified and directed. |
| 12 | Supply and fix Cast Iron Air Valves with Single air Outlets, conforming to IS 14845 of size 200 mm dia bore and fixing up in DI Water supply mains of size 200 mm dia all as specified and directed. |
| 13 | All as per srl item No 12 here-in-before but 150 mm dia bore. |
| 14 | Supply and fixing in replacement of sluice valve flanged end drilled type with steel spindle including nuts, bolts and jointing materials class PN-1.6. of size 200 mm bore. all as specified and directed by Engr-in-Charge. |
| 15 | All as per srl item No 14 here-in-before but 150 mm dia bore. |
| 16 | M&L cutting of road, hard standing made of concrete or premix carpet, suitable for soiling and morrum filling incl excavation for laying of pipe upto 200 mm dia, all as directed and making Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded roadmetal, watering and well ramming (including supply of road metal) ® |
| 17 | M & L for repair/construction of valve chamber of internal size 1200 x 1200 x 1200 mm suitable for 150/200 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed. |
| 18 | S&F up to 200 mm bore dia spigot/flanged/ socketed DI fittings class K-12. such as reducer, bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F up to 150 mm bore dia spigot/flanged/ socketed DI fittings class K-12. such as reducer, bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for ductile iron Di Mechanical Joint for 200 mm dia size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for ductile iron Di Mechanical Joint for 150 mm dia size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for DI Tyton joints for 200 mm dia size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for DI Tyton joints for 150 mm dia size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for Mild steel in flat iron round or square bars, as in supporting for pipe line securing bolts complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for PCC 1:3:6 Type C1 20mm grade agg as in concrete bed to supply pipes including packing under, and haunching against the sides of DI pipes after they are laid and tested for up to 150 mm bore DI pipe complete all as specified and directed by Engr-in-Charge. |
| 26 | Schedule of credit amount of Rs 1263536 to be deducted during AOC Please Enable Macros to View BoQ information |
