|
| 1 | Taking down shutters of any description exc 1 sqm and nexc 2 sqm each. |
| 2 | S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commerical type on both side with second class hardwood lipping all round complete all as specified and directed. |
| 3 | M & L 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass, gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. |
| 4 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed |
| 5 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 6 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised. |
| 7 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 8 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 9 | M&L two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer |
| 10 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) |
| 11 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 13 | S&F 100mm butt hinges, aluminium extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21. |
| 14 | S&F Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:3) on fair face of brick or concrete surface incl dismantling of tiles and taking out backing coat. |
| 15 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM(1:4) incl dismantling of tiles and taking out backing coat. |
| 16 | S & F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl Taking up or down steel tubing 15 mm bore incl Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth. complete all as specified and directed. |
| 17 | S & F in repair 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 18 | S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection 600mm long etc. |
| 19 | S&F in repairs Bib tap cast copper alloy fancy type chromium plated long body screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed. |
| 20 | S&F in repairs Pillar taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs |
| 21 | S&F in repair Stop valves /angle cocks 15 mm bore fancy type, CP with long shank & cup cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions |
| 22 | S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed as in waste pipe of kitchen sink incl fittings. Complete all as specified and directed. |
| 23 | S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed as in WHB waste pipe incl fittings. Complete all as specified and directed. |
| 24 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm |
| 25 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 26 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers |
| 27 | S&F in repairs Brass CP shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union. |
| 28 | S&F in repair CP grating 100mm dia. Complete all as specified and directed. |
| 29 | S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) |
| 30 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) |
| 31 | S&F repair 20mm dia CP towel rail 600mm long incl all fittings complete all as specified and as directed. |
| 32 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including tarfelt/bitumen sheets. |
| 33 | M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm including cleaning of surfaces complete all as specified and directed. |
| 34 | M&L PCC (1:2:4) type B1, using 20mm graded stone aggregate for fixing of spouts pipes in sunken portion, complete all as specified and as directed. |
| 35 | M&L PCC 1:5:10 type E2, using 40mm graded stone aggregate as in foundation, filling and mass concrete for sunken portion complete all as specified and as directed. |
| 36 | S&F 40mm bore GI tubing, light grade, with all fittings and fixed under floor as spout pipe complete all as specified and directed. |
| 37 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces (in sunken portion) with mixing WPC @ 3% by weight of cement and finished even & smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid separately as supply only. |
| 38 | M&L for cutting holes into or through cement concrete , slabs, chajjas, etc reinforced or otherwise superficial area exc 100 Sqcm but not exc 250 sqcm complete all as specified and as directed. |
| 39 | M & L for 25mm thick PCC 1:2:4 type BO, using 12.5mm graded stone aggregate as in floor complete all as specified and directed. |
| 40 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM(1:4). |
| 41 | S&F in repair 32mm dia Waste coupling for WHB of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) |
| 42 | S&F in repair 40mm dia stainless steel waste coupling for sink. |
| 43 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 44 | M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white laminations fixed with screws to timber frame work. |
| 45 | M&L IInd class hardwood nexc 3 sq cm, plain fillets square, rectangular in section, clean sawn, secured with nails or brads. |
| 46 | S&F 40mm width of flaps (when open) continous (piano) hinges, mild steel, bright finish or electrogalavanised. |
| 47 | S&F 125mm long hasp & staple, safety type of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws. |
| 48 | S & F in repair CP curtian rod 20mm internal dia with bracket etc and fixed on wall. Complete all as specified and directed |
| 49 | S & F in repairs stainless steel kitchen plate rack of size nexc 1.00 sqm and 1 mm thick (18 gauge) complete all as specified and directed. |
| 50 | M&L one coats of acrylic Distemper, white or tinted on old wall surface including necessary scaffolding, trestles, ladders, cradles etc for necessary execution of work and protective measures and removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 51 | M&L two coats of acrylic Distemper, white or tinted on old wall surface including over a coat of 1mm thick wall care putty and including necessary scaffolding, trestles, ladders, cradles etc for necessary execution of work and protective measures and removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. |
| 52 | M & L for preparation of old plastered or unplastered surfaces of ceilings including cornices, etc and applying one coat of white wash including necessary scaffolding, trestles, ladders, cradles etc for necessary execution of work and protective measures, removing of nails, making good holes, cracks etc, work in patches etc, spreading and removing coveings to doors, windows, floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 53 | M & L for rendering 10 mm thick in CM 1:6 on brick Work or concrete surface incl taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed |
| 54 | M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling incl taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed |
| 55 | M & L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick Work or concrete surface incl taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed |
| 56 | M&L two coats of acrylic Distemper, white or tinted on new wall surface including over a coat of 1mm thick wall care putty and including necessary scaffolding, trestles, ladders, cradles etc for necessary for execution of work and protective measures, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. |
| 57 | M & L for preparation of new plastered or unplastered surfaces of ceilings including cornices, etc and applying three finishing coat of white wash necessary scaffolding, trestles, ladders, cradles etc upto 10m height for necessary for execution of work and protective measures and removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 58 | M&L two coats of cement base paint, white or tinted on new wall surface including preparation of surface including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures, removing of nails, making good holes, cracks etc, work in patches etc, spreading and removing coveings to doors, windows, floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 59 | S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures |
| 60 | S&F Figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures |
| 61 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples. |
| 62 | S&F in repair 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed |
| 63 | S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 64 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised. |
| 65 | S&F in repair 100mm long MS butt hinges for pressed steel chowkhat or wooden chowkhat. |
| 66 | Rescuring or easing & adjusting without taking down the shutter exc 1 sqm and nexc 2 sqm each. |
| 67 | S&F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete fixed on MS pressed steel chowkhat or wooden chowkhat as per site requirements. |
| 68 | S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 69 | M&L cement concrete type B1-1 1:2:4 (using 20mm graded aggregate) as in roof padding, roof/chajjas kerbs or mud stops, rounded or chamfered on edges, haunching etc. finished even and smooth without using extra cement with water proofing compound. including necessary scaffolding, trestles, ladders, cradles etc upto 12M height for necessary for execution of work and protective measures. (Note- WPC shall be paid separately) |
| 70 | Supply only liquid water proofing compound. |
| 71 | M&L for providing APP 3MM thickj polyster membrane after Applying bitumen-based primer over the prepared surface as per manufacture instruction at recommended coverage and allowing it to dry till tack-free condition before membrane application at consumption of 0.25- 0.4 KG /sq.mtr. and applying APP modified polyester (PY) reinforced bituminous membrane of thickness 3 mm by torch-on method, heating both primed substrate and underside of membrane uniformly to achieve proper bonding. incl . Making of angle fillets all around the periphery of the wall with polymer modified mortar Supplying & grouting the gaps around the pipe / inserts with General Purpose Grout, a non shrink cementitious waterproof grout. Conforming to the following standards: ASTM C 109 - 1999 18, ASTM C 1107, Grade C complete as per instructiions. complete as per manufacturer's instructions. Membrane shall have: Weight mininum 4Kg/sq.mtrThickness - Not less than 3mmMinimum tensile strength and elongation as per ASTM D 6222 - 600N/5cmSoftening point ≥ 150°CResistance to water pressure up to 5 bar without leakage. Applying the aluminum reflective paint of for better Solar Reflection. Incl taking down and refixing the water tank and GI tubing any size and capacity after laying the membrane. |
| 72 | Demolition and breaking up drain pipes any size (salt glazed ware, AC, PVC(SWR), cast iron or reinforced concrete) complete all as specified and directed.. |
| 73 | S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall incl cutting holes and make in good PCC type B-0, 1:2:4 (using 12.50mm graded agg) incl taking down existing pipes including necessary scaffolding, trestles, ladders, cradles etc upto 12M height for necessary for execution of work and protective measures |
| 74 | S&F 75 mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall incl cutting holes and make in good PCC type B-0, 1:2:4 (using 12.50mm graded agg) incl necessary scaffolding, trestles, ladders, cradles etc upto 12 M height for necessary for execution of work and protective measures |
| 75 | S&F 110 mm bore PVC (SWR) bends any radius. |
| 76 | S&F 75 mm bore PVC (SWR) bends any radius. |
| 77 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal. |
| 78 | S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal. |
| 79 | S&F 110mm PVC (SWR) vent cowl. |
| 80 | S&F in repair brass spindle for bib cock, angle valve, stop cock etc. Compelete all as specified and directed. |
| 81 | S&F aluminium powder coated frame/track for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 82 | S&F aluminium powder coated of any colour (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 83 | S&F aluminium powder coated of any colour (thickness of powder coating not less than 50 micron) window and ventilator shutters, side hung/sliding any type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings. |
| 84 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing in square n exc 0.5 sq.m in each pane for aluminium windows |
| 85 | S&F Sheet glass 4.80mm thick, ordinary quality & glazing in square n exc 0.5 sq.m in each pane for aluminium for doors. Please Enable Macros to View BoQ information |
