Tender For Installation Of New Gauge Posts And Re-Installation Of Broken Gauges Available At Various Ho Sites Under Mgd-3 Cwc Varanasi., Varanasi-Uttar Pradesh
TDR : 55621741
Tender Notice
BOQ
6 Days Left
Varanasi
Uttar Pradesh
Tender For Installation Of New Gauge Posts And Re-Installation Of Broken Gauges Available At Various Ho Sites Under Mgd-3 Cwc Varanasi.
Name of Work:- Installation of New Gauge Posts and Re-installation of Broken Gauges available at various HO sites under MGD-3 CWC Varanasi.
Sl. No.
Item Description
1
Installation of New Gauge Posts and Re-installation of Broken Gauges
2
Fabrication and Installation of Gauge Posts at river banks including cost of civil works in foundation embedded in 1:2:4 reinforced cement concrete pedestal block of size 60 cm x 60 cm x 60 cm including the cost of steel reinforcement, centering, shuttering, finishing, reinforcement over the 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc. complete (excluding retro reflective paints).Reinforced Cement Concrete gauge post of size 15 cm x10 cm (one side tapered in 5 cm length) made with 1:2:4 concrete mix (1 cement: 2 coarse sand: 4 graded stoneaggregate 20 mm nominal size)-1.80 m long. (rates excluding retro reflective paints) CWC SOR 2025 Item No. 3.1.1.2
3
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains(Not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m- DSR Vol. 01-2.8.1
4
Painting of gauge Post 1.8 m long with synthetic enamel of approved brand & manufacture to give an even shade by two or more coats and marking the gauge with Japan paint Red, Black and White with standard metric gradation marking of 5 mm thickness in black & white alternately & Red synthetic enamel of width 5 mm at every 50 mm etc complete CWC SOR 2025 Item No. 3.1.8.1
5
Painting of gauge Post 1.8 m long with synthetic enamel of approved brand & manufacture to give an even shade by two or more coats and marking the gauge with Japan paint Red, Black and White with standard metric gradation marking of 5 mm thickness in black & white alternately & Red synthetic enamel of width 5 mm at every 50 mm etc complete CWC SOR 2025 Item No. 3.1.8.1 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
