Name of Work:- Resurfacing of 130m wide road from Tilpta rotary point to Makora rotary (Both side), Greater Noida.
Sl. No.
Item Description
1
Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.25kg/Sqm on prepared bituminous surface cleaned with mechanical broom (MORTH-5.02/503/(i))
2
Providing and laying dense graded bituminous macadam with Higher capacity batch type HMP using crushed aggregates of specified grading Premixed with bituminous binder VG-30 @4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve to desired compaction as per MORTH Specification CLAUSE No 505 complete in all respects (Morth/5.04/505(B))
3
50mm compacted thickness with bitumen perpetration of [email protected]% by weight of total mix. (MORTH-/5.05/505(B))
4
Providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @5.40 Percent of mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled vibratory and tandem rollers to achive the desired compaction as per MORTH specification clause No 507 complete in all respects. (MORTH/5.05/507(B))
5
40mm compacted thickness with bitumen penetration of [email protected]% by weight of total mix. (MORTH-5.05/507(B))
6
Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. (SOR-2020/New item/Sr.No.19.01)
7
Reflective Raised Pavement Markers (Road Studs/Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrile) or HIPS (Hi-impact Polystyrene) or aa acrylonitrile butadiene styrene (ABS). The marker shall supported a load of 1335 Kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably by 351 5 ̊ to base and area of each retro-reflecting surface shall not be less than 13.0Sacm road studs shall be legibly marked with name trade mark or other means of densification of the manufacture. Dimensions of road studs should not be less than 100mmX100mmX10mm. RPM (with shank) as per ASTM. Chapter-26 Traffic sign S.N.5
8
Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
