|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces incl WPC. WPC shall be measured and paid separately complete all as specified and directed. |
| 3 | M&L for two coats of cement based paint over a coat of primer on newly plastered concrete or masonry surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 4 | M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and directed. |
| 5 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 6 | M&L rendering 10mm thick cement plaster in cement mortar (1:3) finished even & smooth without using extra cement on brick/concrete/ceiling surfaces complete all as specified and directed. |
| 7 | M&L for two coats of oil bound distemper over a coat of primer on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 8 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of approved shade of oil emulsion distemper, complete all as specified and directed. |
| 9 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying two coat of approved shade of oil emulsion distemper, complete all as specified and directed |
| 10 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre two or more coats over a coat of primer on including preparation of surfacesof approved manufacturer, of required shade and colour complete, as per manufacturer's specifications complete all as specified and directed. |
| 11 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of cement base paint , complete all as specified and directed. |
| 12 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying two coats of cement base paint , complete all as specified and directed. |
| 13 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on ceiling, complete, all as specified & directed. |
| 14 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on walls, complete, all as specified & directed. |
| 15 | M&L for prepation of old painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for preparation of existing old surface of chequred tile, interlocking tile etc and applying two coats of floor guard paint of specified tint using Roller/Brush complete all as specified and directed. |
| 18 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 19 | M&L for preparing old surfaces of walls plastered plastered by complete removal of existing treatment by electric grinder brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required hade (Company Depot Tinted) with silicon additive @ 1.43 litre/ 10 sqm over and complete all as specified and directed. |
| 20 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 21 | Demolition of RCC in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work Cement concrete (unreinforced) complete all as specified and directed. |
| 22 | M&L RCC type B1 (1:2:4) nominal mix using 20 mm graded crushed stone aggregate in Chajjas of any height complete all as specified and directed. |
| 23 | M&L for Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat of any height complete all as specified and directed. |
| 24 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 25 | M&L for removing the plants/ vegetation upto Six story height including pertreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by making cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) including necessary scaffolding etc wk will be carried out upto 6 th storey complete all as per specification and directions of the Engineer-in-charge. |
| 26 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed. |
| 27 | M&L Vitrified coloured tiles 10 mm thick light shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 28 | M&L Vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 29 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with coloured tiles over with and including 15 mm Screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 30 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 31 | Description all as per item Sr No. 30.00 here in before but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 32 | M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ shade ) of size 300 x 450 / 350x450 / 350x250 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 33 | Demolition of plain cement concrete (Un reinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 34 | M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed. |
| 35 | S&F in repair 600x450mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 36 | S&F in repair Bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair complete. |
| 37 | S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. |
| 38 | S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 39 | S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 40 | Supply & Fixing in repairs 15mm bore CP wall mixter with telephonic shower with tube and hook of complete all as specified and directed. |
| 41 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 42 | S&F in repair towel rail ,D type, brass, chromium plated,, fancy type, 600mm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed. |
| 43 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 44 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 45 | M&L for Cutting chases not exc 10cm girth in brick walls for concealed water tubings and making good complete all as specified and directed. |
| 46 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 47 | Description all as per item Srl No. 46.00 here in before but 20mm bore complete all as specified and directed. |
| 48 | S&F in repair PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed. |
| 49 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed. |
| 50 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed. |
| 51 | S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed. |
| 52 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed. |
| 53 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting for cabinets fixed with screws complete all as specified and directed. |
| 54 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc,laid bedded and pointed in any mortar complete all as specified and directed. |
| 55 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Demolition of stone slab and tiles laid dry or laid dry and pointed in any mortor of any description or thickness in floor, aprons etc complete all as specified and directed. |
| 56 | S&F in repairs Rotational moulded polyethene Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete. |
| 57 | S&F in repairs Rotational moulded polyethene Water Storage Tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed. |
| 58 | S&F table top vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 59 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed. |
| 60 | Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified. |
| 61 | S&F PVC (SWR) 110mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 62 | S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 63 | S&F PVC (SWR) 110mm pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 64 | S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 65 | S&F PVC (SWR) 110mm pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 66 | S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 67 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm with shutter(without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 68 | Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each shutters of any description. complete all as specified and directed. |
| 69 | S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain/ colour PVC sheet reinforced with MS square tube as per specification & drawings specified in SSR Part-II 2010 complete all as specified and directed. |
| 70 | S&F Factory Made Solid PVC Moulded Door Shutter of any colour (as approved by GE) with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 71 | S&F first class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 72 | S&F 40 mm thick first class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 73 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 74 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. |
| 75 | S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 76 | S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed. |
| 77 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs complete all as specified and directed. |
| 78 | Notes:-(i) The work will also be carried out in some multi storey bldgs. Hence necessary complete scaffolding and other safety arrangements will be managed and made by tenderer/ Contractor accordingly at their own expenses.(ii) Tenderer's kind attention is also invited to Srl clause 1.16 of Sec-I on srl page No 6 (General rules for Safety in Construction) as specified in SSR Pt-I (2009) for safety measures/ precautions. Please Enable Macros to View BoQ information |
