Tender For Provision Of Street Lighting Arrangement For Drain From Police Station, Jamia Nagar To Police Station, Shaheen Bagh In Ward No 188 Under Central Zone, Delhi-Delhi
TDR : 55618483
Tender Notice
BOQ
2 Days Left
Delhi
Delhi
Tender For Provision Of Street Lighting Arrangement For Drain From Police Station, Jamia Nagar To Police Station, Shaheen Bagh In Ward No 188 Under Central Zone
Name of Work:- Provision of street lighting arrangement for drain from Police Station, Jamia Nagar to Police Station, Shaheen Bagh in Ward No 188 under Central Zone
Sl. No.
Item Description
1
Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required .(a) 3 x 1.5 sq. mm
2
LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy>135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4- 5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70,under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 45 watt
3
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade offollowing size in the existing masonry open duct as required. Up to 35 sqmm
4
Supply of XLPE insulated and PVC sheathed Al. Conductor Armored cable 1.1 KV gradeconforming to IS 7098 of 2x6 sqmm as reqd.
5
Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat ironwith primer and finish paint etc. as reqd. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
