|
| 1 | Work of Snowcem, whitewash, Distemper on Non-Residential Buildings/Boundary Wall of 66KV Sub Station BBMB Chandigarh |
| 2 | Scraping (a) White wash and colour wash Pb. CSR Ref. No. 8.31(a)-L/R |
| 3 | Preparation of plastered surfaces fordistempering including surface, applying fillingwith approved quality filler consisting ofplaster of paris and chalk mitti includingfinishing the surface to the required finishcompletePb. CSR Ref. No. 16.6-T/R |
| 4 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Pb. CSR Ref. No. 16.65-T/R |
| 5 | White washing (two or more coat) Pb. CSR Ref. No. 16.2-T/R |
| 6 | Finishing walls with cement based water soluble paint such as snowcem, robbiacem etc. two or more coats to give aneven shade Pb. CSR Ref. No. 16.13-T/R |
| 7 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed Pb. CSR Ref. No. 16.12-T/R |
| 8 | Distempering with dry distemper of approved manufacture two or more coats on old distempetered surface when shade is changed Pb. CSR Ref. No. 16.9-T/R |
| 9 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint..Pb. CSR Ref. No. 16.18-T/R |
| 10 | Painting two or more coats with aluminium paint to give an even shade excluding priming coatshadePb. CSR Ref. No. 16.25-T/R |
| 11 | Precast Cement Concrete Channel (a) Providing and laying factory made rubber moulded smooth finish cement concrete Channel M-20 grade 300mm wide and 75mm thick made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&Hspecifications (Ref 24.42T/R) |
| 12 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surfaceRef (16.31 ) T/R |
| 13 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.Ref 6.6 T/R |
| 14 | Dismantling concrete (d) Cement concrete plain1:2:4 mix Ref (8.6 d) L/R |
| 15 | Dismantling concrete (b) Cement concrete plain 1:4:8 or 1:5:10 Ref (8.6 b) L/R |
| 16 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth means ( Ref. No.11.5) (T/R) |
| 17 | 12.5 mm thick cement plaster 1:5 Ref (15.10) T/R |
| 18 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. Ref (9.2) |
| 19 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering insuperstructure. Ref 10.20 T/R |
| 20 | Cement concrete 1:2:4 with stone ballast or shingle mixing by manual means (Pb. CSR Ref. No.10.13) (i) (T/R) |
| 21 | Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position:-Tees, angles and channels. ( Ref. No. 18.1) (c) T/R |
| 22 | Welding by gas or by electric plant, including carriage to and from workshop etc. Ref (18.28) T/R |
| 23 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. Ref (16.20) T/R |
| 24 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Ref (16.17) T/R Please Enable Macros to View BoQ information |
