|
| 1 | Earthwork in hard soil of foundation in ordinary soil within initial leads & lifts including dressing and levelling of bed etc, complete. |
| 2 | Filling foundation and plinth with sand well watered and rammed including all costs etc complete. |
| 3 | Filling foundation and plinth with sand well watered and rammed including all costs etc complete. |
| 4 | P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete. |
| 5 | R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. In foundation & plinth including all necessary centering and shuttering complete.( A) Foundation for Gallery |
| 6 | COLUMNS |
| 7 | PLINTH BEAM |
| 8 | Lintels |
| 9 | Staircase gallery |
| 10 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 11 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percent in cement mortar (1:6) in super structure. GROUND FLOOR |
| 12 | 12mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete. |
| 13 | 16mm thick cement plaster in cm (1:6) with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete. |
| 14 | 6mm thick c.p. in cm (1:4) Over RCC surface with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete. |
| 15 | Fixing industrial vetrified tile in floor on 20mm thick bed (1:4) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles.(printed series) |
| 16 | Fixing vetrified tile in Wall Or Dado with 12mm thick cement plaster (1:3) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles.(printed series) |
| 17 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 18 | Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor |
| 19 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint all labour T&P etc complete. |
| 20 | Both Side Laminated Flush Door all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 21 | Providing and fixing factory made uPVC white colour sliding glazed window screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. with 5mm Clear soft coating glass saint gobain ST-167 upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 22 | Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming, and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 23 | Painting 2 coats with any approved paint on new iron work including cost of all labours and materials etc. all complete. |
| 24 | 2.5 cm grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips etc complete |
| 25 | Turfing the slopes of embankment,ground with compact turf grass as per approved Drawing & Technical Specifications and as per Clause - 307 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete. |
| 26 | Earth work in excavation of foundation in hard soil or gravelly soil with 50m. initial lead and 1.5m.initial lift including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying in layers not exceeding 0.3m. in depth and as per the direction of the Engineer-in-charge. |
| 27 | Filling foundation and plinth with sand well watered and rammed including all costs etc complete. |
| 28 | Supplying, filling in F&P with clean course good river sand including watering, ramming, poking & compacting & cost, conveyance royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer-in-charge. |
| 29 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge. |
| 30 | Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, and royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge |
| 31 | R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. a) Column base Footing |
| 32 | B) Plinth Band |
| 33 | c) Column superstructure |
| 34 | d) Lintel Bend |
| 35 | e) Chajja |
| 36 | G) Roof Beam |
| 37 | h) Roof slab |
| 38 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 39 | Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. |
| 40 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 41 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 42 | 6mm thick in C.P.(1:4) Celling Plaster to old R.C.C. surface to the smooth surface including clsoed deep chipping all costs etc. complete. |
| 43 | Fixing ultra tile in floor on 20mm thick bed (1:4) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles. |
| 44 | Supplying, fitting and fixing tiles in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.(For new work only) |
| 45 | Supplying, fitting & fixing of Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 13755 of size 60cm x 60cm coloured/printed series in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 46 | Both Side Laminated Flush Door all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 47 | Providing and fixing of 30mm thick Flush door shutter with hinges,tower bolt,handle, stainless steel screws etc Including the cost of all materials, hardware fittings, cost of all labour, conveyance,taxes, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-charge. |
| 48 | Providing and fixing factory made uPVC white colour sliding glazed window screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. with 5mm Clear soft coating glass saint gobain ST-167 upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 49 | Supplying fittinf and fixing of M.S. window grills made out of M.S Square bar/ flat etc. in wooden choukaths and ventilators etc.including painting with a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. |
| 50 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 51 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 52 | Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 53 | Priming one coat with water bound wall cement primer with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 54 | Painting two coats with plastic emulsion paint over a coat of Water Bound Wall cement Primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 55 | Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of Water Bound Wall cement Primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance of all materials, cost of all labours, labour cess, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. |
| 56 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. |
| 57 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor: |
| 58 | 2.5 cm grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips etc complete |
| 59 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 60 | Earthwork in excavation in foundation in all kinds of soil including hard muroom,stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and tools & plants and dewatering if required for the work etc.complete asper the direction of the Engineer-in-charge. |
| 61 | Supplying and filling in foundation trenches and plinth with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. |
| 62 | Filling foundation and plinth with excavated materials well watered etc complete as per the direction of Engineer-in-charge. |
| 63 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors with 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer -in -charge. |
| 64 | Fly ash Brick masonary in Foundation & Plinth in C.M. (1:6) including all cost etc. complete. |
| 65 | R.C.C work of M-20 grade using 20mm and down sizegraded hard granite crusher broken chips of approved quality and from approved quarry including mixing, hoisting, lowering,laying, compacting concrete in layers of specific thickness conforming to technical terms &condition of M-25 grade concrete including cetering, shuttering, and finished the exposed surface smooth providing beads where necessary including watering,curing with all cost, conveyeance, royality, taxes of all materials,all labour charges tool&plant articles required for the work etc. complete as per the specification and direction of the Engineer-in-charge. A) Column Base |
| 66 | B) Column |
| 67 | C) Grade Beam |
| 68 | d) R C C Beam |
| 69 | Straightening, bentup or coiled rod cutting, bending, cracking, hooking, welding or jointing( if required).the tor rod and binding wire laying the reinforcement and placing in proper position as required for R.C.C work providing fanhooks when necessary including cost conveyance, royality, taxes of M.S or Tor steel and binding wire 18 to20 gauge and cost of all labour,tool & plant required for the work as per the specification and direction of the Engineer-in-charge. |
| 70 | K.B.Brick masonary in Foundation & Plinth in C.M. (1:6) including all cost etc. complete. |
| 71 | 12mm thick cement plaster to uneven surface Building outside of Brick walls in cement mortar (1:6) finished smooth to brick wall after racking out the joints including cost conveyance, royality, of all materials and all labour tool & plant required for the work and including watering, curing, finishing. etc complete as per the direction of the Engineer-in-charge. |
| 72 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respect with providing grooves as directed by the Engineer in charge. |
| 73 | Painting two coat of wether coat with 1coat of primer any approved shade of including all cost as perdirection of E.I.C. |
| 74 | Providing ,fitting,and fixing of MS Grill made out of M.S flats squarebars as per drawing and as per design fixed in poisition to proper plumb , including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes complete in all respect as per direction of E.I.C. |
| 75 | Painting Synthetic Enamel paint 2coats with 1coat of Primer to Iron wok with any approved shade . |
| 76 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge |
| 77 | Supplying of filling sand in foundation and over areas including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-charge. |
| 78 | Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers of floorings etc.using 40mm size black hard crusher broken granite metal of approved quality from approved quarry including mixing ,lowering,laying concrete in not less than 150mm thick and compacting to proper thickness,watering and curing for the required period as per directions of the Engineer-in-charge,including cost of al materials ,all taxes and roytalities,loading and unloading conveyance,all labour,sundries,T& P etc.complete. |
| 79 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 80 | b) Pedestal |
| 81 | c) Plinth beam :- |
| 82 | d) Column up to top :- |
| 83 | f) Beam :- |
| 84 | g) Slab |
| 85 | Providing & fixing Rod Fe--500 reinforcement bar for Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge.Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 86 | 6mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as direction of Engineer-In-charge. |
| 87 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 88 | Painting two coat of weather coat with 1coat of primer any approved shade of including all cost as perdirection of E.I.C. |
| 89 | Earth work in excavation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 90 | Construction of granular sub-base by providing Gr.-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller. |
| 91 | Providing and filling sand with good river course sand and well-watered & rammed etc. complete as per the direction of Engineer-in-charge. |
| 92 | Providing of 80 mm thick factory made cement concrete interlocking paver block of M-35 grade and approved make,varity colour and size made by block making machine with strong vibratory compection of approved design and shape ,laid in required colour and pattern over 50mm thick compected bed of coarse sand ,filling the joints with fine sand etc,all T&P etc complete as per direction of Engineer- in-charge. |
| 93 | Internal & External PH Work Please Enable Macros to View BoQ information |
