|
| 1 | Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead |
| 2 | Removing and dismentlling cement plaster from walls including raking out the joints 12mm deep and removing the drbries within 50mtr lead . |
| 3 | Earth work in all kinds of soil including rough dressing and levelling the bed. |
| 4 | Carriage of earth/slushy soil after excavation |
| 5 | Filling F&P with sand well watered and rammed. |
| 6 | C:C: (1:4:8) using 4 cm. size H.G. metal (C.B) including the cost of all materials, labour etc complete. |
| 7 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth and super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 8 | Super Structure |
| 9 | R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying Compound wall plinth |
| 10 | Paver locking |
| 11 | Gate Column base |
| 12 | lintel |
| 13 | Gtae Column |
| 14 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 15 | 12mm thick C:P (1:6) over brick work |
| 16 | Supplying all materials, albour, T&P and making of out door signage structure board of MS angles including wrought and put up etc. complete. |
| 17 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 18 | Supplying,fixinging of precast kerb stone size 300 x300 x 150mm with all cost. |
| 19 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 60mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern. |
| 20 | 16mm thick C:P (1:6) over brick work |
| 21 | Priming one coat with any approved primer including the cost of labour & primer. |
| 22 | 6mm thick C:P (1:4) over brick work |
| 23 | Wall painting two coats with plastic emulsion paint with cost of paint. |
| 24 | Fixing granite in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 25 | Providing fifting and fixing of shoulder mounted informatory Sign Board of size (1150 mm x 743mm) using upper high efficiency full cubic reflective sheeting type-XI DG3-ASTM on 4mm thick Aluminium Composit Panel (ACP) over which alphabets and numericals and reverse cut with computerised cut plotter on frame made out of 30x30x1.5mm square SS pipe main frmae, 25x5mm SS flat back suppoirt frame, 1 nos 80NB SS post with top cover including screws and revets as may be required. The frame will be fixed after necessary excavation, concrete and transportations to work site with loading and unloading and installation of the board digging 1 no ( 450x450x800mm) foundation and trench and filling with M-15 grade concrete and compacting properly including all cost, conveyance, taxes, royality etc. complete as directed by EIC. |
| 26 | Fixing tiles (300mm x300mm/400mm x 400mm) in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles |
| 27 | Fixing tiles (300mm x300mm/200mm x 200mm)in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 28 | Fixing tiles (200mm x200mm/300mm x 300mm) in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles |
| 29 | Supplying fixing M S square hollow section with all cost. |
| 30 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 31 | Labour for fixing of Tata/Bhusan/Jindal Make Aluminium semi corrugated colour sheet 0.5 in roof drilling holes in wind ties including fixing ridges and valleys etc complete. |
| 32 | Supplying,fixing 40 liters capacity water cooler with all cost |
| 33 | Supplying fixing Children play equipment & GYM equipment with all cost. Merry go round |
| 34 | Spiral slider |
| 35 | Rainbow climber |
| 36 | Air swing |
| 37 | ABB crunch |
| 38 | Twester |
| 39 | Glider or shete back leg press |
| 40 | Providing & Fixing to wall or ceiling & floor pvc pipes class 15mm diameter |
| 41 | 25mm diameter |
| 42 | Brass Screw-down Bib-Cocks (Taps) Polished Bright 15mm dia Brass Screw-down Bib Cock |
| 43 | 20mm dia Brass Screw-down Bib Cock |
| 44 | 15mm dia Brass Srew -down Stop Cock |
| 45 | Fixing water closet, squatting pan(Indian type W.C pan) |
| 46 | P.V.C. low level flushing cistern |
| 47 | Vitreous china pedestal for wash basin white |
| 48 | Fixing Rotational moulded polythylene cylindrical vertical water |
| 49 | Hoisting Rotational moulded Polythylene cylindrical vertical water storage tanks |
| 50 | Cutting grooves in pucca floors & walls for taking GI/PVC pipes & making good the damages as per specification comploete. |
| 51 | 110mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 52 | Coupler (110 mm dia) |
| 53 | 75mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 54 | Fixing Standard Sized Chromium Plated brass towel rail complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws, |
| 55 | Fixing standard sized Chromium plated brass towel ring fixed to wooden plugs with chromium plated brass screws, complete as per specification |
| 56 | CP soap holder |
| 57 | Supplying, fitting & fixing of Stainless steel gate of 304 grade with all cost |
| 58 | Cutting holes through existing brick work including making good the same in cement mortar(1:4) for taking GI/PVC pipes & fittings etc. all complete as per specification. |
| 59 | Brass Gun Metal Full Way Valve confirming to IS:781-1995 of the following nominal sizes with wheel as per specification complete |
| 60 | Brass Ball Valve (Horizontal plunger type) confirming to IS:1703-1997 as per specification complete. |
| 61 | Fixing PVC waste pipe of following nominal diameter for basin or sink including brass check nut complete as per specification. |
| 62 | Supply & planting of shrubs - saplings, well developed, min. 0.6m high, well branched, preferably in bloom, in polybag of 30x20cm size, disease free and development including excavation up to 450mm deep, spreading good quality soil and FYM mix, continuous weeding operations, pre-treating area with anti-termite insecticide, planting of plants as specified in drawings including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant.Plant name - Acalypha wilkesiana (Cooper Leaf) |
| 63 | Plant name - Alpinia Variegated (Shell Ginger) |
| 64 | Plant name - Chlorophytum comosum (Spider Plant) |
| 65 | Plant name - Cordyline terminalis (Ti Plant) |
| 66 | Plant name - Halmelia patens (Firebrush) |
| 67 | Plant name - Hymanucallis littoralis (Beach Spider Lily) |
| 68 | Plant name - Ixoro sp White (Ixora) |
| 69 | Plant name - Roheo tricolor (Oyester plant) |
| 70 | Supply & planting of Ground covers - saplings, well developed, min. 0.10m high, disease free and development including excavation up to 150mm deep, spreading good quality soil and FYM mix, continuous weeding operations, pre-treating area with anti-termite insecticide, planting of plants as specified in drawings including supply of necessary labor and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant. |
| 71 | Post Top - 3.0m (10Ft.) high |
| 72 | Cabling |
| 73 | FSP, junction boxes, etc. |
| 74 | 12mm thick C:P (1:4) over brick work including cement punning & bitumen painting over Top of wall (Data for 1 M2) |
| 75 | Display Board Please Enable Macros to View BoQ information |
