|
| 1 | Supplying all materials, labour and T&P for Earth work excavation in foundation and trenches in all kind of soil , laying servicable and unservicable material in layers not exceeding 0.3m in depth etc. all complete as per specification and direction of the Engineer-in-charge. |
| 2 | Supplying all labour, T&P and earth work in excavation in stoney earth and gravel mixed with stone boulders not exceeding 0.014 cum in volume within 50M initial lead and 1.5M initial lift, in foundation as per the direction of the Engineer-in-charge. |
| 3 | Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge. |
| 4 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 5 | Supplying all labour T&P for provision of pump set for dewatering from the trenches including cost of POL and operator etc all complete and as per the direction of Engineer-in-charge. |
| 6 | Supplying all labour T&P for Cutting of C.I pipe by eletric arc welding at site including cost of materials,labour,T & P etc all complete e as per the direction of Engineer-in-charge. |
| 7 | Supplying all materials, labour and T&P for of ISI Marked Centrifugally Cast (Spun) Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete. (Cost of rubber gaskets shall be inclusive in the cost of pipes of different diameters.) |
| 8 | 150MM DIA D.I. S/S Pipe (K7) PRESSURE PIPE |
| 9 | Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. |
| 10 | 150mm.dia Push-on-joints |
| 11 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials) |
| 12 | 5% of Pipe weight (620 x 0.228 x 5%) |
| 13 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 14 | 150 mm dia MS pipe (6.30mm thick) |
| 15 | 150 mm dia M.S. Flange x 12 mm thick |
| 16 | 150mm dia M.S X 12 mm thick Blank flange |
| 17 | 150 mm dia x 90* Plain Bend |
| 18 | 150 mm dia x 45* Plain Bend |
| 19 | 200mm x 150mm x 200mm dia M.S.Plain Tee |
| 20 | 200 mm dia M.S. Flange x 12 mm thick |
| 21 | Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of Engineer-in-charge |
| 22 | 150mm dia flange joints |
| 23 | 200mm dia flange joints |
| 24 | Supplying all labour and T&P for cutting of following dia MS pipe of 7.00mm thick in treanches by gas cutter set of pocket etc all complete |
| 25 | Supplying all labour and T&P for jointing following dia MS pipe of 7.00mm thick in treanches by electric arc welding & genetator set of pocket etc all complete |
| 26 | Supplying of materials, labour and T&P for laying in trenches C.I. specials conforming to I.S.-1538 of the following diameter as per P.H. specifications . (excluding earth work in excavation,jointing and cost of specials) as per direction of Engineer-in-charge. |
| 27 | 200 mm dia mech joint socketed tail piece |
| 28 | 150 mm dia mech joint socketed tail piece |
| 29 | Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve/ AIR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve . |
| 30 | 25mm dia Air Valve (PN1.6) Vag/Talis/AVK Make |
| 31 | 150 mm dia Sluice Valve (PN 1.6) with wheel Vag/Talis/AVK/Hawal Make |
| 32 | Supply, installation, testing & commissioning of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 68 signal converter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagnostics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition .The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation.The Approved Make : (ABB,Krone,Immersion,Bermad,E & H) including cost of material with all taxes transporataion to Site/Storage with insurance. |
| 33 | 150mm dia |
| 34 | Supply, installation, testing & commissioning of double chamber DI Control valve (globe type) with solenoid , hydraulic operated with stem amd Positioner for feed back switch, selonoid valve, integral orifice plate assembly, differential control, reverse flow control, restriction orifice Body PN-1.6 can be integrated with PLC pannel for operation with a minimum Pressure in upstream 0.2 kg/cm2 to a maximum pressure of 8 kg/cm2 of The Approved Make : CLA,DOROT S-300,SINGER,BERMAD-700,VAG to control water supply including cost of material with all taxes transporataion to Site/Storage with insurance. |
| 35 | 150mm dia |
| 36 | Supplying all materials,labour and T&P for constructing brick masonry chamber with HD-20 Cover Slab as per P.H. specification and design all complete. |
| 37 | S.V. chamber internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S/V.. with HD 20 Factory made Cover Slab |
| 38 | S.V. chamber internal size:-[0.90x0.90x1.20mtr] Flow Meter & Control valve Chamber with HD 20 Factory made Cover Slab |
| 39 | Filling in foundation with sand watered and rammed including cost of materials, labour,T & P etc all complete as per specification & direction of Engineer-in-charge. |
| 40 | Providing cement concrete (1:3:6) with 12mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. allcomplete as per specification and direction of Engineer-in-charge. |
| 41 | Providing Cement Concrete (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in-charge. |
| 42 | Filling foundation and plinth with excavated materials including watering and ramming as per specification & direction of Engineer-in-charge. |
| 43 | Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. Please Enable Macros to View BoQ information |
