Tender For Improvement To Headwork Of Salasala Mip(Diversion Weir) In Narasinghpur Block Of Cuttack District Under Improvement To Diversion Weir Scheme For The Year 2026-27.
Tender Value
51.30 Lakhs
Estimated cost
Bid Submission
30 May 2026
0 days left
EMD
51400
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Narasinghpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Headwork Of Salasala Mip(Diversion Weir) In Narasinghpur Block Of Cuttack District Under Improvement To Diversion Weir Scheme For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish and depositing the same clear of work site with all leads, lifts and delifts etc with supply of all labour and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. |
| 2 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment constructionconstruction & Clause 305 of MoSRT&H Specifications for Road & Bridge works etc. complete in all respect as directed by the Engineer-in-charge. |
| 3 | Excavation loading, unloading and carriage by mechanical means of all kinds of soil, including Stoney earth, gravel and moorum etc inters read with boulders upto1/2 cum size wih all lifts and delifts including trimming of slope and bed to design section and depositing the excavated materials away from site as per the specification and as directed by the Engineer-in-charge within an initial lead of 1 km from the place of excavation complete as directed by the Engineer in-charge. (Measurement will be taken on finished level section)only. (1 KM) |
| 4 | Dismentalling and removing Cement concrete work of all height including stacking the useful materilas for reuse and removing the debrises within 50m lead etc. complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Supplying filling in foundation and plinth with sand in layers not exceeding 23cum (9\\") thick including watering and ramming with the cost conveyance, royalities taxes of the materials and labour with T & P required for the Work etc. Complete as per specification and direction of the Engineer-in-Charge. |
| 6 | Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transportation by mechanical means and unloading the soil with all leads and lift on properly prepared and scientifically approved surface including spreading and levelling the earth in 30.00 cm layers to make ready for compaction with HRR in afflux bund for all height including construction, maintenance and lightening of haul road and borrow area etc. complete as per direction of Engineer-in-Charge.(Excluding OMC) (1 KM) |
| 7 | Providing Cement Concrete M15 grade on approved surface , shape and size using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and any other deleterious materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, all incidental charges required for the work complete in all respect as directed by the Engineer-in-charge. |
| 8 | Providing Cement Concrete M20 grade for RCC works on approved surface, shape and size using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and any other deleterious material, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, ( excluding cost, carriage of M.S. rod and labour for cutting, bending, binding and fixing of M.S. rod) with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, with all incidental charges required for the work complete in all respect as directed by the Engineer-in-charge. |
| 9 | Supplying, straightening, cutting, bending, binding of steel reinforcement of different diameters and tying the grills as per approved design & drawing and placing in position including, cost, conveyance, royalties and other taxes of M.S. Rods, binding wires of 18 to 20 gauge including providing concrete chairs, dowel bars, lapping wherever necessary with supply of all labour and T&P required for the work etc, complete in all respect as directed by the Engineer-in-charge. |
| 10 | Providing rigid shuttering with the box type steel shuttering plates with keys for intermediate construction joints for plain or reinforced cement concrete works including false work and dismantling the same after casting and proper curing including cost, conveyance, royalty and taxes of all materials required for the work with supply of all labour and T&P required for the work etc, complete in all respect as directed by the Engineer-in-charge. |
| 11 | Rough stone dry packing in aprons & revetments to all heights & thickness using hard stones of size (15cm to 30cm) of approved quality free from weathered skin surface including filling the interstices with small stones by wedging & hammering to proper slope and level with cost conveyance, royalty & other taxes of all materials, labour & T & P materials required for this items complete in all respect as directed by the Engineer-in-charge. |
| 12 | Grouting approns and revertment 23cm deep with cement concrete (1:4:8) with 2.5cm. Broken granite metal per 1Sqm with cost conveyance, royalty & other taxes of all materials, labour & T & P materials required for this items complete in all respect as directed by the Engineer-in-charge. |
| 13 | Providing and laying admixture with sand and moorum in (2:3) proportion with cost, carriage royalty of all materials and laying the admixture in canal bed and slopes, wel water and rammed to line and level, with cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of Engineer-in-charge. |
| 14 | Providing, laying, spreading and compacting stone aggregates of specific sizes IRC- GRADE-I (90 mm to 45 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works etc. complete as per approved specification and direction of Engineer-in-charge. |
| 15 | Providing, laying, spreading and compacting stone aggregates of specific sizes IRC- GRADE-II (63 mm to 45 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works etc. complete as per approved specification and direction of Engineer-in-charge. |
| 16 | Supplying and stacking good quality moorum at road sides in regular box heaps and conveying from stacks and spreading in uniform thickness on road surface including watering and rolling with PRR with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in-Charge |
| 17 | Providing weep holes in brick masonary plain/reinforce concrete abutment wing wall/return wall with 100mm dia PVC pipe extending through the full width as structure with slope of 1:2 including cost conveyance, royalities taxes of the materials and labour with T & P required for the Work etc. Complete as per specification and direction of the Engineer-in-Charge. |
| 18 | Excavation in all kinds of soil including moorum, stoney earth, gravel etc. excepting all kinds of rock & boulders exceeding 0.014cum in volume for dam base stripping, cut-off trenches, outfall drains and stripping in borrow areas including rough dressing and dumping the excavated materials away from work site with supply of all labour and T&P required for the work etc., complete in all respect as directed by the Engineer-in-charge. (Measurement will be taken on the finished compacted approved level section). |
| 19 | Fine dressing of earth work in ordinary or hard soil in road formation according to the direction of the department including cutting or filling earth upto 0.15m depth of surface. complete as per specification and direction of the Engineer-in-Charge. |
| 20 | Filling in foundation and plinth with excavated earth with all leads, lifts & delifts including making arrangement for carriage of water and with cost conveyance of all materials, labour required for the works including watering and ramming etc. complete and including supply of labour and T & P required for the work complete in all respects as directed by the Engineer-in-Charge. (By Mechanical means).(Measurement will be taken on finished level section)only |
| 21 | Ramming or rolling earth work with light H.R.R in embankment in layers not exceeding 0.3m. with supply of all labour and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender