|
| 1 | Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete. |
| 2 | Brick Masonry in cement mortar walls under 3m high |
| 3 | Earthwork excavation &depositing on bank with initial lead of 10m & initial lift of 2m in sand, silt or other loose soil, wet sand not under water and ordinary soil including cost of all labour, lead,lift,etc.,complete. (SS 20B) |
| 4 | Supply and filling with Msand for foundation including watering, consolidation etc.,complete. |
| 5 | PCC 1:4:8 using 40m HB stone for foundation including cost of al materials and labour etc., complete. |
| 6 | RCC 1:1.5:3 using 12 to 20mm(machine crushed) metal for raft concrete without formwork including cost of all materials, lead, lift, etc., complete. (As instructed by the Engineer at site) |
| 7 | RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal with centering, shuttering, form work including cost of all material, lead, lift,etc, complete, but excluding cost of steel reinforcement(As instructed by the Engineer at site) |
| 8 | Column up to GL |
| 9 | Column above GL |
| 10 | Brickwork in CM 1:5 mix using II class chamber bricks of size 9\\"x 4 3/8\\"x2\\"3/4\\" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. Ground Floor |
| 11 | Plastering with CM. 1:3 mix 12 mm thick for fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete. |
| 12 | Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete. |
| 13 | Supply and fabricating of MS angles / flats of required sizes for fixing of chain link wires as per standard drawing and as directed by the field engineer at site including all materials, consumables, two coats of painting ,labour , lead and lift etc., complete. |
| 14 | Supplying and fixing Galvalume sheet roofing with 0.5mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts etc., complete complying with standard specification and as directed by the departmetal officers |
| 15 | Colour washing two coats with Exterior Plastic Emulsion paint over one coat of Plastic Emulsion primer for outside wall including cost of all materials, labour, lead, lift, etc., complete. |
| 16 | SGST & CGST (If applicable quote the value, if not enter '0') |
| 17 | IGST (If applicable quote the value, if not enter '0') Please Enable Macros to View BoQ information |
