|
| 1 | Material and Labour Charges |
| 2 | Providing and laying weather proof solor reflective ceramic tiles 300mm x 300mm size over screed concrete 1:2:4 using 10 to 6mm HBG metal with average thickness of 50 mm for required gradient and using best quality one course of weather proof solar reflective ceramic tiles of approved quality using CM 1:3, 12mm thick and using 3mm spacer and pointing with water repellent U bond and grout including cost of all mateirals, transport curing etc complete |
| 3 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locationsto a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the baseconcrete. The rate is inclusive of the charges for cutting,bending, welding, grinding, polishing, conveyance,electrical charges, etc. complete |
| 4 | Fabricating, supplying and fixing MS gates of required width and height and embedding the name of TANGEDCO in the gate and as per standard specification and providing two coats of enamel paint over red oxide including cost of all materials, labour, lead, lift, etc complete as per instruction of departmental Engineer at site. |
| 5 | Dismantaling of birck mansondryin cement mortar wall under 3m height the cost of labour, lead charges etc amd removal of debries 1km lead including the cost of loading unloading and transpotation charges. |
| 6 | Providing for false celling with plain Gypsum board with GI chennal sections materials for fixing , lead, lift ,labour charges etc complete. |
| 7 | Providing plywood of 6mm thick over which laminated sheet of 0.8mm thick fixed outside using fevicol along with necessary screws, etc., as directed by the Departmental Officers. The design pattern, plywood, |
| 8 | Providing Granite tiles for stpes (Ruby Red, Raw Silk )finish with 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement / Joint grout in all floors as directed by the Enginer in charge including cutting chase in walls wherever required, cost of all materials, labour charges, lead, lift, curing, T&Ps, etc., complete. Please Enable Macros to View BoQ information |
