|
| 1 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (B) Above 95 sq. mm and up to 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 2 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 X 25 sq. mm (28mm) |
| 3 | (b) 3½ X 95 sq. mm (45mm) |
| 4 | (c) 3½ X 185 sq. mm (57mm) |
| 5 | Supplying and installation following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. (a) 200 mm width X 50 mm depth X 1.6 mm thickness |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a) Above 95 sq. mm and upto 185 sq. mm |
| 8 | Supplying and Laying and fixing of one number armoured XLPE copper power cable of 1.1 KV grade of following size on cable tray as required. (a) 4 x 25 sqmm |
| 9 | Supplying and Laying and fixing of one number armoured XLPE Aluminium power cable of 1.1 KV grade of following size on cable tray as required. (a) 3.5 x 95 sqmm |
| 10 | Supplying and fixing of 250 A HRC fuse link and HRC Fuse Base DMC Type 250 Amp 500V AC with steel fasteners and necessary accessories of adequate size as per site requirement, Rated Voltage:- 500V AC,Breaking Capacity:- 80kA,Rated watt loss:- 32W,ISI MARK:- As per IS 13703, Pt-2, Sec-1 for overload and short circuit protection for circuits up to 500 Volts. ( DIN TYPE ) Body Material Ceramic,HIGH BREAKING CAPACITY 80kA,500 VOLTS: 50HZ, 80KA, \\"gG\\". Make: seimens/ABB/Schneider |
| 11 | Supplying and fixing of 400 A HRC fuse link and HRC Fuse Base DMC Type 400 Amp 500V AC with steel fasteners and necessary accessories of adequate size as per site requirement, Rated Voltage:- 500V AC,Breaking Capacity:- 80kA,Rated watt loss:- 45W,ISI MARK:- As per IS 60269, Pt-2, Sec-1 for overload and short circuit protection for circuits up to 500 Volts. ( DIN TYPE ) Body Material Ceramic,HIGH BREAKING CAPACITY 80kA,500 VOLTS: 50HZ, 80KA, \\"gG\\". Make: seimens/ABB/Schneider |
| 12 | Less Credit Please Enable Macros to View BoQ information |
