|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. |
| 2 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15cm to 20 cm thick including hand packing and compacting etc.complete. |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneissmetal for foundation and bedding / steps including steel centering, formwork, laying/pumping,compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The CementMortar 1:3 plaster is considered for rendering uneven and honeycombed surface,only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batchmix plant (Panmixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) |
| 4 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of externalwalls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 5 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done /striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. |
| 6 | Providing and laying Cast in situ/ReadyMix cement concrete in M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. coping top linth or parapet and sill of door sand windows moulde dasper detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLCwithSCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade |
| 7 | Providing and laying Cast in situ/ReadyMix cement concrete M-40 of trap / granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc.columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is tobe provided and curing etc. complete. (Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)) |
| 8 | Providing and laying Cast in situ/ReadyMix cement concrete M-40 of trap / granite/ quartzite/ gneiss meta lfor R.C.C.columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro process or basedPLCwithSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed includingcutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.. |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. |
| 12 | Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. |
| 13 | Providing andapplying twocoats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required,etc. complete. |
| 14 | Providing and fixing dry rubble stone pitching 23 cm (about 9 ) thick with mortar joint filling including all material, quarry spalls, labour etc. complete |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cementmortar 1:6 in foundations and plinth of innerwalls/ in plinth external walls including bailing out water manually , striking jointsonunexposed faces, rakingoutjoints on exposed faces and watering etc. Complete. |
| 16 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at design ated locations anddisposal of dismantledmaterials up toa leadof 1000metres, stacking serviceable and unserviceable materials separately etc. complete. |
| 17 | Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method pre scribed in IS:2800(part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire&running charges of all equipments, tools, plants&machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. |
| 18 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 3.75 kW/5 HP with discharge 715/200 lpm for head of 17/39 m and 65 mm suction/50 mm delivery pipe on provided CC foundation with required length of armour cable as per specification no. WP-CGP. |
| 19 | Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pumpset of 3.75 kW/5 HP with 415 V, three phase, 50 Hz A.C. supply suitable for 150 mm dia. borewell with 210 to 860 lpm discharge at 38 to 13 m head & discharge & delivery pipe of size-65mm dia. with a necessary H type clamps with required length of armour cable as per specification no. WP-SMP. |
| 20 | Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1000mm diameter in proper line, level and slope etc. complete. |
| 21 | Providing selected hard murum filling including laying in layers of 15 to20cm with watering and compacting etc. complete. |
| 22 | Cutting down trees including trunks and branches with girths above 90cm to 180cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any |
| 23 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . |
| 24 | Painting with approved enamel paint in two coats including cleaning surface and lettering for________ stone etc. complete |
| 25 | Lettering for cautionary/ mandatory sign boards and village name boards |
| 26 | Lettering for informatory sign boards etc. complete. |
| 27 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 28 | Providing and fixing informatory sign boards in square or rectangular shape of any size for overhead gantries or alike made out of 3mm aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type XI Diamond Grade Sheeting (DG3) With ECF( Electronic Cutable Film) Lettring having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame and bracing of size 35 mm X 35 mm X 5 mm and duly painted with flat oil paint including G.I. fixtures etc. and fixing the boards. (The work to be executed with prior approval of Superintending Engineer.) Please Enable Macros to View BoQ information |
