|
| 1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 4 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacture and of required shade/colour complete as per manufacture specifications two or more doats on new work |
| 5 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 6 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:1 Internal work-Exposed on wall1.1 15 mm dia. nominal bore |
| 7 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:1 Internal work-Exposed on wall 20 mm dia. nominal bore |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 9 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 10 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pairof 15 mm C.P. brass pillar taps. |
| 11 | Providing and fixing c.p brass bib cock of approved quality conforming to IS:8931. (15mm nominal bore ) |
| 12 | Providing and fixing uplasticised PVC connection pipe with brass unions 15mm nominal bore |
| 13 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete flexible pipe 32 mm dia |
| 14 | Providing and fixing CP grading of 100 mm dia of approved brand. (Jaquar Essco) |
| 15 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 16 | Providing and fixing PVC pipe at the weight of 4 kg/sqm Finlex /Supreme 110 mm diametre |
| 17 | Providing and fixing PVC pipe at the weight of 4 kg/sqm Finlex /Supreme 75 mm diametre |
| 18 | Providing and fixing electric point complete in all respect as per necessary as site (NSI) Please Enable Macros to View BoQ information |
