|
| 1 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Demolition for Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified. |
| 3 | Precast cement concrete block masonry with solid blocks Type C1, 1:3:6(20mm graded aggregate), exc.10cm in width and setting in mortar of 1:6, complete |
| 4 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 5 | M&L for Hardcore Broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rolled/rammed to a true surface |
| 6 | M&L 75 mm thick PCC (Plain cement concrete) type D-2 1;4;8 (40 mm graded aggregate ) as in sub base. |
| 7 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided formid steel work of any description |
| 9 | Supply and Fix mild steel in framed work such as grills gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes ;framed guard bars;barred iron doors;ladders framed ballusters walk ways railings and similar work confrming to Fe 290.Gde E-165 |
| 10 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome to new steel surfaces of any description over 10 cm width or girh not otherwise described. |
| 11 | Dismantling Asbestos cement (Corrugated, semicororrugated , etc) sheets in roof covering including ridge complete all as specified and directed. |
| 12 | S&F Pre-Painted galvalume aluminium zink coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified. |
| 13 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 14 | S & F in repair PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 110 mm bore in Rain Water pipe |
| 15 | S&F in repair PVC (SWR) bends any radius 110 mm bore |
| 16 | Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement. |
| 17 | Cement concrete in foundations, filling and mass concrete Type D2,1:4:8 (40 mm graded aggregate) |
| 18 | Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) having 75mm thick. |
| 19 | Providing precast cement concrete in cover slabs (for man holes etc.) with plain faces set in cement mortar 1:4 of Type B1, 1:2:4 ( 20mm graded aggregate). |
| 20 | TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 21 | M & L cement concrete type C2 1:3:6 (40 mm graded aggregate) as in cement concrete in foundations, filling and mass concrete all as specified and directed. |
| 22 | Supply and fix post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh or etc) including all necessary drilling, bolting or riveting or welding etc and similar work confirming to Fe-290 and E-165 all as speicified and directed. |
| 23 | Supply only Chain link MS galvanisd fencing, any size or type etc. Including proivision of binding wire all as specified and directed. |
| 24 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. Including proivision of binding wire or welding |
| 25 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground for the posts embedded in concrete. |
| 26 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified |
| 27 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement. |
| 28 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade 'A' all as specified. |
| 29 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 30 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ of 100mm thick Please Enable Macros to View BoQ information |
