|
| 1 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep along the existing sewage line carefully for placing taking out and getting out in soft/loose of soil complete all as specified and directed. |
| 2 | Returning and filling soil in layers not exceeding 25cm thick each layer including spreading leveling watering and well ramming andcomplete all as speicified and as directed. |
| 3 | Removal of surplus material to a distance not exc 50 m and deposited where directred at a level not exc 1.50 m above starting point and complete all as specified and as directed. |
| 4 | M & L salt glazed stone ware drain pipes of internal dia 150 mm bore grade 'A' laid in trenches and jointed complete all as specified and as directed. |
| 5 | M & L salt glazed stone ware drain pipes of internal dia 200 mm bore grade 'A' laid in trenches and jointed in cement mortar complete all as specified and as directed. |
| 6 | M&L for concrete bed to drain pipe including packing under and haunching against the sides of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 150mm dia drain pipe complete all as specified and directed |
| 7 | M&L for concrete bed to drain pipe including packing under and haunching against the sides of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 200mm dia drain pipe complete all as specified and directed |
| 8 | Cutting into existing manholes for connecting new drains pipe of 150 mm dia, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, surfaces smooth finished and reforming benching as required complete all as specified and as directed. |
| 9 | Cutting into existing manholes for connecting new drains pipe of 225 mm dia, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, surfaces smooth finished and reforming benching as required complete all as specified and as directed. |
| 10 | Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 11 | Reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm aggregate )in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 12 | M&L Cement concrete 1:2:4 type B1using 20 mm graded stone aggregate as in lintels, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, padding, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed . |
| 13 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bend to shape required, including cranking, bending spirally for hoopin complete all as specified and as directed.g for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 15 | M & L for 100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone agg) as in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green including complete all as specified and directed. |
| 16 | M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation of manholes, drains, walls and similar works etc, ncluding demolition existing cement concrete,complete all as specified and directed. |
| 17 | M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 all as specified and as directed. |
| 18 | M&L 15mm thick rendering on External fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.Note : WPC shall be measured & paid seperately. |
| 19 | Supply only liquid water proofing compound of approved make (ISI marked) all as specified and directed. |
| 20 | M & L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setting in CM 1:6 work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces including demolition of old reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick in cement mortar (1:4) on brick or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all specified and directed. |
| 22 | M&L Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new /old surfaces. all as specified and directed. |
| 23 | Material and labour for Vitrified ceramic light shade tiles of 8-10mm thick and area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in floor over 15 mm thick rendering in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white cement to match, including dismantling of existing tile and disposal to outside MD land complete all as specified and directed. |
| 24 | Material and labour for Vitrified ceramic light shade tiles of 8-10mm thick and area of each exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in vertical surfaces over 10 mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement to match, including dismantling of existing tile and disposal to outside MD land complete all as specified and directed. |
| 25 | S&F of Powder coated aluminium frame work (minimum thickness of powder coating 50 micron) for partition with one or more rebates incl Joining cleats,hooks, hangers, beadings, rubber gaskets etc, powder coating minimum thickness of powder coating 50 micron and fixed in position for making bed curtains all as per direction of Engr in Charge. |
| 26 | Supply and fix 12mm thick Veneered particle board, solid core, exterior grade, with decorative face veneers for both faces all as specified and directed. |
| 27 | Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed. |
| 28 | Provn of work station / work bench using 16-18mm plywood grade BWR type B-B with factory pressed laminate (1mm colour laminate external and fabric textured 0.5mm internal) and 1mm PVc edge beading on every edge of the frame complete all as specified and directed by Enge-in-Charge. |
| 29 | S&F Ball bearing runners 500mm Telescopic channel full load extension load capacity of 50 kgs fixed drawer and all as specified and directed. |
| 30 | S&F Stainless steel handles 100mm size for drawer/ shutters and all as specified and directed. |
| 31 | Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 32 | Supply and fixing Door closer, aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed . |
| 33 | Supply and fixing brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and directed . |
| 34 | S&F manually operated polyester fabric roller venetian blinds of approved colour and pattern of any size and thickness of 0.45mm (+/- 0.05mm) including high strength aluminium alloy extruded roller grooved tube having outer diameter 38 mm (=/- 0.05mm) and thickness 1.25mm (=/- 0.05mm) with ball chain pulley, ball chain including mounted projected aluminium brackets of powder quoted finish etc, screws and fixing, complete all as specified and directed. |
| 35 | Applying silicon sealent on joints of wall,cill jambs roof etc complete all as specified as directed |
| 36 | Cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed. |
| 37 | S&F in repair 20-25mm thick SS curtain rail incl brackets fixed into wall using wooden plug, screw etc complete all as specified and directed. |
| 38 | S&F 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 39 | Material and labour for 18mm thick WPC board for kitchen cabinets door, shelves, sides and back, one side white in colour and other side dark colour, complete all as specified and directed. |
| 40 | Material and labour for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring surface as in level course etc complete all as specified and directed. |
| 41 | M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. |
| 42 | Supply and fixing anodised aluminiun size 605 x 605 mm snap grid frame work for false ceiling as per manufacturer instructions, with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including 18mm thick gypsum designer tiles, fixed to sheet suitably placed in false ceiling grid made of aluminium/G.I./ M.S.as per pecification and drawing, complete all as specified and directed. |
| 43 | S&F of 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes) complete all as specified and directed. |
| 44 | M&L for Preparation of old decorated surfaces of walls by Washing, rubbing down and stopping of distempered and painted surfaces,applying one coat of wall 1mm thick care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufauture instruction of required shade complete all as specified and directed. |
| 45 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down/ dismantling of old one complete all as specified and directed. |
| 46 | S&F 250 to 300mm wide valley gutter (PVC) incl clamps, bends etc and fixing to the existing structure incl taking down pipe of any dia as opening with required slope fixed all as specified and direcetd |
| 47 | S&F Pre painted Coloured Galvalume roofing sheets 0.50 mm thick having Zinc aluminium alloy coating double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified & directed. |
| 48 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as directed |
| 49 | M&L MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 50 | M&L MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 51 | S&F MS Plates Fe 410 -W (Gde- E- 250) quality- A (plain or chequered) channels, square cut or notched (ordinary and counter sunk forming holes, without any attachment |
| 52 | M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 54 | Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 55 | Supply and fixing 25 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 56 | Supply and fixing 25 mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe all as specified and directed. |
| 57 | Supply and fixing 15 mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe all as specified and directed. |
| 58 | S&F bib tap (suitable for washing machine) brass body chromium plated fancy type fixed to 15mm dia bore of pipe complete all as specified and as directed. |
| 59 | Supply and fixing in repair 15 mm bore fancy type single lever Basin mixer chromium plated cast copper alloy with capstan head, long screwed shanks of Jaquar or equivelent all as specified and as directed. |
| 60 | Supply and fixing 15 mm bore stop/angle valves cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed both ends for pipe or union complete all as specified and as directed. |
| 61 | S&F Grating doom 150 mm dia with waste hole of Chromium plated complete all as specified. |
| 62 | S&F Wash hand basin table counter type 560x400x200mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block, including long shank pillar tap, Brass chromium plated waste coupling 32mm bore, Waste pipe bottle trap, including taking down existing one complete all as specified and directed. |
| 63 | S&F repair Swivel Mirror 630x445 mm of selected quality glass of jaquar or equivalent complete all as specified and as directed. |
| 64 | Supply and fixing in repairs brass Chromium plated Tubular towel rail 20mm D Type dia, 60 cm long complete all as specified and as directed. |
| 65 | S&F 300mm arc size, 5mm thick corner glass shelf with stainless steel brackets, stainless steel railing in bathroom and fixed to wall with brackets including removing the existing fitting as required at site complete all as specified and as directed |
| 66 | Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed. |
| 67 | Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed. |
| 68 | Material and labour for Unplasticiscd PVC pipes 50mm of pressure rating 10 kgf/cm2 laid in trenches in repair complete all as specified and as directed. |
| 69 | S & F in repairs 125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 70 | S&F Rotational moulded polyethylene water storage tank of 500 Ltrs capacity cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed. |
| 71 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 72 | S&F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 73 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 74 | Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed. |
| 75 | Supply and fix 50mm dia PVC bend any radius complete all as specified and as directed. |
| 76 | S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including strap, nut, bolt, screw, rawl plug etccomplete all as specified and directed. |
| 77 | S&F of 75mm dia bore PVC (SWR) bends any radius incl cutting and making good of wall complete all as specified and directed. |
| 78 | S&F of 75mm dia bore PVC (SWR) junction single, (Single Y) equal or unequal any radius incl cutting and making good of wall complete all as specified and directed. |
| 79 | Demolition/breaking up or down PVC /Ac/CI/Cement drain pipe any size fixed in any position complete all as specified and as directed. |
| 80 | S&F 110 mm dia PVC (SWR) pipes any length and in any position(with clamps in wall) complete all as specified and as directed. |
| 81 | Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and supplying and fixing Joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed. |
| 82 | Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and Material and labour for Glazed digital / rustic finish ceramic coloured tiles 350x250mm/ 450 x 300 mm x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as skirting/ dado including 10mm thick 1:4 backing coat complete all as specified and directed. |
| 83 | M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4) including demolition of old stone slabs complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 84 | M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4) including demolition of old stone slabs complete all as specified and as directed. Please Enable Macros to View BoQ information |
