|
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc and getting out in soft/loose soil. |
| 2 | M&L cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundations filling and in mass concrete. all as specified. |
| 3 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified . |
| 4 | M&L Brickwork with Old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 5 | Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing. |
| 6 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 7 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete all as specified and directed. |
| 8 | Formwork to sides of pillars, posts, struts, piers,columns, and stanchions square or rectangular for rough finished surfaces of concrete complete all as specified and directed. |
| 9 | Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work; n.exc 200 mm thick. |
| 10 | Formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs n.exc 20 cm width for rough finished surfaces. |
| 11 | M-25 Design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like using 20 mm graded aggregate. |
| 12 | M-25 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete (using 20 mm crushed stone graded aggregate) all as specified and shown on drg. |
| 13 | M-25 Design mix as in Columns, pillars, piers, posts and struts (using 20 mm crushed stone graded aggregate) all as specified and shown on drg. |
| 14 | M-25 Design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span (using 20 mm crushed stone graded aggregate) all as specified and shown on drg. |
| 15 | TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips. |
| 16 | All as per item No 15 above but 6 mm to 8mm dia. |
| 17 | All as per item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 18 | Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. |
| 19 | Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified. |
| 20 | Rendering 5mm thick on brick work or concrete surface in cement mortar 1:3 finished even and smooth without using extra cement all as specified. |
| 21 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. |
| 22 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 23 | M&L spreading leveling in layers n exc. 25cm thick and well ramming. |
| 24 | M&L 100mm thick cement concrete 1:3:6 type C-2 in sub base. |
| 25 | M&L broken brick Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 26 | M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified. |
| 27 | M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified. |
| 28 | M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified. |
| 29 | M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified. |
| 30 | M&L for treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per running metre complete all as specified. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | All as per item No 31 above but of frame size 65 x 100 mm. |
| 33 | All as per item No 31 above above but of frame size 65 x 125 mm. |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note : stainless steel butt hinges and necessary S.S screws shall not be paid separately) . |
| 35 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item.) |
| 36 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose).(ii) Area not exceeding 2.00 sqm each. |
| 37 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose).(ii) Area exceeding 2.00 sqm each. |
| 38 | S&F 6 mm thick toughened glass as in hinged doors, sliding and fixed windows, glazed partitions, automatic doors and similar works, including cutting to required size and shape, drilling holes, notching, edge polishing and all necessary preparations, complete all as specified and directed. |
| 39 | S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (Brass). |
| 40 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified. |
| 41 | S&F in repair peg set of Six mild steel all as specified. |
| 42 | S&F 5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 43 | S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified. |
| 44 | S&F Aluminium locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size. |
| 45 | Supply only mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified. |
| 46 | S&FAluminium handle, cast type, anodised 150 mm long complete all as specified. |
| 47 | M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified. |
| 48 | M&L for applying two coats of Oil emulsion distemper on walls including preparation of newly plastered surfaces with 3mm thick wall care putty complete all as specified. |
| 49 | M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified. |
| 50 | M&L two coats of cement base paint and including preparation of new surface. |
| 51 | M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 52 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 53 | M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified. |
| 54 | M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 55 | M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 56 | M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 57 | M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified. |
| 58 | M&L for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded aggregate) using waterproofing compound (SBR) for maintaining proper roof slope and finishing cement concrete surface even and smooth wihout using extra cement complete all as specified. (Minimum thickness of concrete should not be less than 25mm at any point).Note : Waterproofing compound should be measured and paid seperately. |
| 59 | Supply of SBR waterproofing compound @ 2% of per kg cement used complete all as speccified.Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger Paints |
| 60 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coating as per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalent by brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat of ShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicator approved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 61 | M&L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed. |
| 62 | S&F in repair wall mounted Viterous China wash down water closet pan pedestral pattern,white including connection pipe to flushing cistern anti syphonage pipe with pvc flush pipe of 32 mm dia and 'P' or 'S' trap device and incl. plastic seat cover and concealed cistern with 05 & 10 Ltr both flushing option with mild steel chromium plated hinging complete all as specified and as directed by engineer-in charge. |
| 63 | S&F Chromium plated health faucet 1 mtr long fixed with screws complete all as specified and directed. |
| 64 | S&F EWC Jet spray complete all as specified and directed. |
| 65 | S&F in repair 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 66 | S&F vitreous china wash hand basin white flat back of size 550x400 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified. |
| 67 | S&F Vitreous China urinals, bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe. |
| 68 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/platic cleats (minimumweight 300gms). |
| 69 | S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic screws. |
| 70 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltr. |
| 71 | Supply & fixing 3 layer PPR CONCEALED PIPES of size 16mm SDR 7.4 (PN16) UV stabilised having thermal stability for hot and cold water supply incl. all PPR plain and brass threaded polypropylene random fittins fixed to walls complete all as specified. |
| 72 | Supply & fixing 3 layer PPR CONCEALED PIPES of size 20mm SDR 7.4 (PN16) UV stabilised having thermal stability for hot and cold water supply incl. all PPR plain and brass threaded polypropylene random fittins fixed to walls complete all as specified. |
| 73 | S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, all as specified. |
| 74 | S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore and fixed in repairs, all as specified. |
| 75 | S&F Stop valve,fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm all as specified. |
| 76 | S&F Bib taps fancy type, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified. |
| 77 | S&F Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, all as specified. |
| 78 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm. |
| 79 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore. |
| 80 | Supply & fixing 100mm bore UPVC (SWR) pipes including necessary fittings like band ,tee,coupler,floor trap etc. single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clampps and laid in trenches or in floors complete all as specified and as directed by Engineer-in- Charge. |
| 81 | Supply & fixing 75mm bore UPVC (SWR) pipes including necessary fittings like band ,tee,coupler,floor trap etc. single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps and laid in trenches or in floors complete all as specified and as directed by Engineer-in- Charge. |
| 82 | Supply for Pipe Supporting Clamping for Single pipe of PVC dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance 75 mm (3\\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 Nos. Fixing Details :Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 83 | S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement. |
| 84 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement. |
| 85 | M&L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 86 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 87 | M&L for Granite (of any type) tiles 16mm to 18mm thick, machine-cut, fixed all around window openings (including sill, jambs and lintel), bedded and jointed with grey cement slurry and pointed with white cement mixed with approved pigment to match the shade of granite; including edge rounding/chamfering as required, and machine polishing to a smooth finish. Granite to be laid on a 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified. |
| 88 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 89 | M&L for preparation of steel and iron (Old/New) surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed. |
| 90 | M&L for Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works in cement mortar 1:4 complete all as specified and directed |
| 91 | S&F each illuminated letter or heart symbol of size approximately 1m height , madw from 5-6 mm thick laser cut acrylic sheet, internally backlit with waterproof IP55-rated LED lighting, including necessary concealed wiring, driver units, conduit protection, standard SS fasteners for fixing on existing wall or surface, along with a background panel made of 3 mm thick ACP (Aluminium Composite Panel) or similar material, finished with powder coating complete all as specified and directed. Note : The cost per letter includes the background panel (ACP), LED lighting, concealed wiring, driver units and all associated fixing works required for installation on the existing surface. |
| 92 | Taking down chowkats with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm each but not exceeding 4 Sqm) removing to store all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 93 | Taking down chowkats with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm each but not exceeding 4 Sqm) removing to store all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
