|
| 1 | Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L 75 mm thick cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing complete all as specified and directed. |
| 3 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. |
| 5 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate mixed with WPC (in proportion as per manufacturer's instruction) as in bedding in sunken portion of slab complete all as specified and directed. |
| 6 | M&L for rendering 10mm thick plaster in cement mortar (1:3) mixed with water proofing admixture (in proportion as per manufacturers instructiion) as in sunken portion, finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 7 | Taking up or down steel/PVC tubing and connections,15/20 mm bore, and making good the surfaces complete all as specified and directed. |
| 8 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 9 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 10 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 11 | S&F in repair 15 mm dia bib tap cast copper alloy(fancy type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 12 | S&F in repair Bib tap standard of PTMT 15mm any colour high pressure screwed for iron pipe and fixed.(Minimumweight15mm-90gms/20mm-125gms) complete all as specified and directed. |
| 13 | S&F in repair, stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed. |
| 14 | S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms complete all as specified and directed. |
| 15 | S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 16 | S&F in repair fancy type pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed. |
| 17 | S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed. |
| 18 | S&F in repair shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. |
| 19 | S&F in repairs 125 mm dia, chromium plated shower rose with or without swivel joints,including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 20 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm CI 'P' trap complete all as specified and directed. |
| 21 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and directed. |
| 22 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket complete all as specified and directed. |
| 23 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed. |
| 24 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 25 | S&F in repair grating doom 100mm dia with waste hole of PTMT (Min wt 25gms) complete all as specified and directed. |
| 26 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 27 | S&F in repairs CP wall mixer (3 in 1) 15mm complete all as specified and directed. |
| 28 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 29 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 30 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed. |
| 31 | S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and directed. |
| 32 | S & F in repairs waste coupling of PTMT (half or full threaded) 40 mm dia , complete all as specified and directed. |
| 33 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement, , finished even and smooth without using extra cement, complete all as specified and directed.Note - WPC shall be measured & paid separately. |
| 34 | M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 35 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 36 | M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 37 | M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed. |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and as directed. |
| 39 | M&L for providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 40 | M&L for tendering 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed. |
| 41 | M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 42 | M&L for coloured Glazed ceramic tiles, 300/350 x 450 x 7mm thick, on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 43 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 44 | All as per ser No 43 but on vertical surfaces such as skirting , dado risers to steps over , set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 45 | S&F in repair vitreous china bowl urinal flat back size of 465x355x265mm white (minimum) with grating and union for discharge pipe ,complete including providing and fixing plugs waste coupling of PTMT (minimum weight 32 mm-45gms/40mm-60gms), bedding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 46 | S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed. |
| 47 | M&L for PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed. |
| 48 | M&L for PVC (SWR) pipes, 100/110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall complete all as specified and directed. |
| 49 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 50 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed. |
| 51 | S&F of 110mm dia PVC (SWR) bends complete all as specified and directed. |
| 52 | S&F of 75mm dia PVC (SWR) bends complete all as specified and directed. |
| 53 | S&F of 110 mm dia PVC (SWR) Vent cowl complete all as specified and directed. |
| 54 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1 mm thick complete all as specified and directed. |
| 55 | M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and directed. |
| 56 | M&L for one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified and directed. |
| 57 | M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine as specified and as directed. |
| 58 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub floor,sub base,floors andpavings etc complete all as specified and directed. |
| 59 | M&L for sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed. |
| 60 | M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments complete all as specified and directed. |
| 61 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate in sub floor,sub base,floors andpavings etc complete all as specified and directed. |
| 62 | M&L prepolished Chequered cement concrete tiles 20cmx20cmx25 mm thick, set jointed and pointe in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 63 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in side of path / benching / coved fillets etc rounded or chamfered on edges complete all as specified and directed. |
| 64 | M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor topping of hard standing finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size complete all as specified and directed. |
| 65 | M&L for, 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone agg.) as in plinth protection, finished even and fair complete all as specified and directed. |
| 66 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 67 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 68 | All as per item No 67 above but except bricks. |
| 69 | Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 70 | M&L for Painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of Zinc chrome primer including preparation of surfaces complete all as specified and directed. |
| 71 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works complete all as specified and directed. |
| 72 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately under respective item of BOQ/schedule 'A'. |
| 73 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 74 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 75 | M & L for cement concrete ( 1:3:6 ) type C2 using 40 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately. |
| 76 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 77 | M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 78 | M&L for preparation of new steel/iron surfaces of any description applying two coates of synthetic enamel ordinary tint over coat of red oxided of any description n exc 10 cm girth , not otherwise described complete all as specified and directed. |
| 79 | S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 80 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 81 | Restraining resecuring including making good staples etc galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 82 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and complete all as specified and directed. |
| 83 | Dismantling Iron/RCC fencing posts or struts any section embedded in natural ground including taking out embedded portion and making good disturbed ground after embedding new posts complete all as specified and directed. |
| 84 | Material and labour for PCC 1:3:6 type C-2 (using 40mm graded stone agg.) in foundation filling and mass concrete and filling of footing for fencing post complete all as specified and directed. |
| 85 | M&L round bars Fe 410W of 10 mm dia and above cut to length, bent to shape required, cindluding cranking, bending spirally for hooping and fixing as required complete all as specified and directed. |
| 86 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and directed. |
| 87 | Supply only chain link MS galvanised fencing, of any size and type complete all as specified and directed. |
| 88 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.(Supply of chain link shall be measured under serial item No 87 here-in-after) complete all as specified and directed. |
| 89 | Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5cm above the starting point complete all as specified and directed. |
| 90 | Dismantling fencing wire mesh,any type complete all as specified and directed. Please Enable Macros to View BoQ information |
