Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated plaster or un-plastered surfaces and providing one coat of white wash on wall including cornices, complete all as specified and directed. |
| 2 | All as per item No. 1 here in before but on ceilings complete all as specified and directed. |
| 3 | M&L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes, cracks etc and applying one coat of oil bound distemper on wall white or tinted, complete all as specified and directed. |
| 4 | M & L for complete removal of existing treatment of old plastered surfaces of wall and applying one coat of wall primer,followed by application of wall Putty in two coat with proper sanding to obtain smooth and even surface, again applying one coat of primer and finally applying two coats of Distempering with 1st quality acrylic emulsion distemper (ready mixed ) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour,complete all as specified and directed. |
| 5 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 6 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 7 | M&L for washing, rubbing down, preparing and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint, complete all as specified and directed. |
| 8 | M&L complete removal of existing treatment and applying two coats of weather proof acrylic emuslion paint over a coat of emulsion wall primer on Exterior Surfaces, all as per manufacture's instructions complete all as specified and directed. Make :- Asian / Apex / Berger (Wheather coat All Guard). |
| 9 | M&L for complete removal of existing treatment and preparation of surface of lore tile/ Asbestos Roof sheet and applying two coats of terracotta roof paint /Apex wheather coat complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiles/stone slab including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 11 | M&L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 12 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile size 400x400 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 13 | M&L for vitrified ceramic tiles with matt finish of approved make and shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc, laid using polymer modified tile adhesive(chemical Fixing)) of approved brand over prepared surfaces complete all as specified and directed. |
| 14 | All as per item No. 13 above but in skirting complete all as specified and directed. |
| 15 | M&L Glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.36 Sqm , laid using polymer modified tile adhesive(chemical Fixing)) of approved brand over prepared surfaces complete all as specified and directed. |
| 16 | M&L for Modern design elevation tles in vertical surfaces of extreme face of columns, facades etc of sizes 300x450x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in Cement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed. |
| 17 | M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge, complete all as spcified and directed. |
| 18 | Taking down cement /lime plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 19 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 20 | M&L 10mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed. |
| 21 | M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed NOTE:- (WPC shall be measured and paid separately) . |
| 22 | M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 23 | Demolition of brick or stone Masonary built in cement mortar etc complete all as specified and directed. |
| 24 | M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 25 | All as per item No. 24 here in before but except stone complete all as specified and directed. |
| 26 | M&L for flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 27 | M&L for brick work with flyash bricks, straight or curved on plan exc 2M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 28 | M & L for preparation of newly plastered antifungal treatment surface of wall and applying one coat of wall primer,followed by application of wall Putty in two coat with proper sanding to obtain smooth and even surface, again applying one coat of primer and finally applying two coats of Distempering with 1st quality acrylic emulsion distemper (ready mixed ) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour,complete all as specified and directed. |
| 29 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 30 | M & L for preparation of new plastered of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over and over two coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and as directed. Make :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 31 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 17.5cm thickness (below or above ground level).complete all as specified and directed. |
| 32 | M&L for machine cut Kota stone slab flooring 18-20mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 33 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as spd & directed. |
| 34 | M&L Only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified & directed. |
| 35 | M&L ENDURA MAXGRIP FLOOR TILES– size exc 0.08 sqm but n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6.complete all as specified and directed.(Make : Johnson and equivalent as approved by GE |
| 36 | M & L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 37 | Taking own old paver block any types complete all as specifie and directed |
| 38 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 39 | Refixing 60mm thick factory made cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc.,by table vibratory method & pattern over and including new 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 40 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 41 | M&L in repair precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 and jallies design as per site requirement complete all as specified and directed. |
| 42 | Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed |
| 43 | Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,including dismantling of old boards/ ciling etc complete at all heights as per direction of Engineer-in-charge. |
| 44 | S&F solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame and 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specified and directed |
| 45 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. |
| 46 | M&L pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength og 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as complete all as specified and directed. |
| 47 | Hacking out old broken glass (any size, quality or description) from metal or wooden frames, glazing with putting or beads and S&F 3 mm thick sheet /Figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and directed. |
| 48 | Taking down chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed. |
| 49 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed. |
| 50 | Taking down shutters of any description exc 1.0sqm and n. exc 2.00 sqm each shutter complete all as specified and directed. |
| 51 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and apply anti rust treatment,restoring the section with polymer modified mortar,followed by cement plaster in CM (1:3) and finishing to match existing surfaces complete all as specified and directed. |
| 52 | M&L for rolled mild steel work as in door frame (chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand including dismaintling of old steel work complete all as specified and directed. |
| 53 | S&F Plain, solid, straight chowkats in 2nd class wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed. |
| 54 | S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0 complete all as specified and directed. |
| 55 | Raking out joint /pointing to random rubble or polygonal rubble stone masonary uncoursed or brought upto courses built in cement mortar and M&L for raised pointing in cement mortar (1:4) complete all as specified and directed. |
| 56 | M&L for taking down shutters of any description exc 1.00 sqm but n. exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed. |
| 57 | M&L for taking down shutters of any description exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed. |
| 58 | S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed. |
| 59 | S & F 35mm thick 2nd cl HW glazed and skeleton shutters open rebated and prepared to receive glass/wire cloth gauge etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part I, sectiion 8, clause 8.24(a) complete all as specified and directed. |
| 60 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 61 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed. |
| 62 | S & F in repair Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 63 | Supply and fixing Anodised aluminium window(three /two track) and ventilator shutters including frame,fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sheet glass 3.0 mm thick etc. complete all as specified all complete as specified and directed. |
| 64 | M&L providing 50x50mm aluminium anodised grills mesh for fixing in Aluminium windows weight not less than 1.2Kg/ Sqm complete all as specified and directed. |
| 65 | M&L for aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed and as per Chief Engineer Drg No |
| 66 | S&F fixed type ventilators aluminium powder coated of frame size 50.80x25.40mm, 1.5mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading, aluminium grill with fixing arrangement (weight of grill not less than 2.50Kg/sqm) aluminium wire mesh 0.45mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as per sample kept in GE office. (AL section thickness 1.50mm) complete all as specified and directed. |
| 67 | Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only. |
| 68 | Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. |
| 69 | Supply only soft close clip on hinge bright finish complete all as specified & directed. |
| 70 | Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. |
| 71 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and directed. |
| 72 | All as per item No. 71.00 here in before but in repairs complete all as specified and directed. |
| 73 | S&F MS butt hinges, medium weigh, cold rolled, ISI marked of size 125mm, complete all as specified and directed. |
| 74 | All as per item No. 73.00 here in before but in repairs incl necessary welding work etc complete all as specified and directed. |
| 75 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed. |
| 76 | All as per item No.75.00 here in before but in repairs complete all as specified and directed. |
| 77 | S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 78 | All as per item No.77.00 here in before but in repairs complete all as specified and directed. |
| 79 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed. |
| 80 | All as per item No. 79.00 here in before but in repairs complete all as specified and directed. |
| 81 | S&F in repair floor door stopper over all length of cover plate 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floors etc complete all as specified and directed. |
| 82 | S&F in repair Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 83 | S&F in repair hasp and staple of size 100mm aluminium safety type including bolt to hinge plate and fixing screw etc complete all as specified and directed. |
| 84 | S&F in repair Stainless steel curtain rod powder coated 25 mm dia with fixing brackets and decorative type knobs etc complete all as specified and directed. |
| 85 | Supply and fixing in repairs brackets mild steel chromium plated powder coated curtain rod brackets and decorative type knobs complete all as specified and directed. |
| 86 | Dismantling of existing unserviceable RCC/PVC water tank and S&F 500 litre capacity rotational moulded polythene water storage tanks three layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 87 | Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 litre capacity rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 88 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed. |
| 89 | Supply and Fixing in repairs vitreous china One piece EWC with slim soft close seat cover including good making, etc complete including making good to floor etc complete all as specified and as directed. Make Cat No. : S1013210 or equivalent) as approved by GE |
| 90 | S & F for repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed. |
| 91 | S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed. |
| 92 | Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting point complete all as specified and directed. |
| 93 | M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed. |
| 94 | M&L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive complete all as specified and directed. |
| 95 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed. |
| 96 | S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as spcified and directed. |
| 97 | S&F in repair PVC flush pipe bend 32mm dia with two nos check nuts for connecting low level flushing cistern to European type WC or IWC including all joints complete all as specifiied and directed. |
| 98 | S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed. |
| 99 | S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed |
| 100 | S&F in repair Swanneck pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed. |
| 101 | S&F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 102 | S&F in repair 25mm bore Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed. |
| 103 | S&F in repair 32mm dia PTMT waste pipe suitable for WHB or Sinks etc complete all as specified and directed. |
| 104 | S & F in repairs grating round 140mm dia PTMT / SS minimum weight 50 gms fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed. |
| 105 | S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed. |
| 106 | S & F in repair stainless steel plate rack made of 0.50mm thick of over all size 914mm x 609mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. |
| 107 | S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed |
| 108 | S&F in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 109 | S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and directed. |
| 110 | S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and directed. |
| 111 | Supply and fixing in repairs for Toilet fittings chromium Coated towel rack 600mm long without lower Haners but three hooks complete all as specified and directed (Make : Jaquar or equivalent as approved by GE (Cat No. CON -1181FHN) |
| 112 | Supply and fixing in repairs 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 113 | Supply and fixing in repairs for Toilet fittings Corner Glass shelf with bracket complete all as specified and directed (Make : Jaquar or equivalent as approved by GE). (Cat. No. CAN-CHR-1173) |
| 114 | Supply and fixing in repairs for Toilet fittings Wall mixer (wall mounted model) with 1.5m flexible tube and hook complete all as specified and directed.(Make : Jaquar or equivalent as approved by GE ). (Cat No. CON - 217 KN) |
| 115 | Supply and fixing in repairs for Toilet fittings Health faucet complete all as specified and directed. (Make : Jaquar or equivalent as approve by GE). |
| 116 | Supply and fixing in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed.(Make : Prayag or equivalent as approved by GE . (Cat No. 555) |
| 117 | Supply and fixing in repairs for Toilet fittings Two way bib cock of 15mm bore complete all as specified and directed. (Make : Jaquar or equivalent as approved by GE). (Cat No. - OPP -CHR- 15041PM) |
| 118 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 119 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 120 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 121 | S&F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 122 | S&F 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 123 | S&F 25mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 124 | Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 125 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 126 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 127 | Supply only liquid water proofing compound complete all as specified and directed. |
| 128 | Taking down the existing material and S&F Mild Steel handle right or left suitable for Mild Steel window duly painted with two coats of stove enamelled paint etc. complete all as directed. |
| 129 | Repair to seel window / gate including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device,glass pane,wiremmesh and making them in serviceable condition complete all as specified and directed. |
| 130 | M&L 2nd class HW palin fillets square, rectangular or triangular exc 6 & n. exc 13 sqcm in section, clean sawn, secured with nails complete all as specified and directed. |
| 131 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 132 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 133 | S & F in repairs 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 134 | S & F in repairs 110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 135 | S & F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 136 | S & F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 137 | M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 138 | M&L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 139 | S&F in repair Jet flush including plate & connection pipe complete all as specified and directed. |
| 140 | M&L for crack repair in wall, ceiling and roof with CM 1:3 mixed with water proofing compound @3% by weight of cement, width of crack is 25mm and 50mm deep including necessary demolition and making good disturbed surface complete all as specified & directed. Note :- WPC shall be measured and paid separately |
| 141 | S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 142 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 143 | S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed. |
| 144 | S & F in repairs Roof tiles, alore pattern, interlocking at side joints, laid dry, complete all as specified and directed. |
| 145 | S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),white with grating and union for discharge pipe including waste pipe, fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs and 60 mm long brass screws pointing around urinal back in cement, excluding flushing cistern, flush pipe, complete all as specified and directed. |
| 146 | Supply and fix in repair vitreous china urinal, Half stall type, white with grating and union for discharge pipe including waste pipe, fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs and 60 mm long brass screws pointing around urinal back in cement, excluding flushing cistern, flush pipe, complete all as specified and directed. |
| 147 | Providing and fixing of Urinal Sensor flushing valve for existing urinal in complete all as specified and directed. |
| 148 | S&F mild steel framed work such as grills, grating cooler stands, water tank staging etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 including dismaintling of old steel work complete all as specified and directed. |
| 149 | Providing and fixing mortise lock(65mm) with key, 6- lever or pin cylinder type, including stainless steel/brass handle,strike plate,key cylinder,screws and all accessories,suitable for any door shutter,including cutting,fitting,testing and making good complete all as specified and directed. |
| 150 | Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed. |
| 151 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: |
| 152 | One light point/bell point/ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch. |
| 153 | One 5 pin 5 Amps socket outlet on same board with other switch. |
| 154 | One 5 Pin 5 Amps socket outlet on independent board with other switch. |
| 155 | One light point controlled by two, 2-way switches. |
| 156 | All as per item No 151.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board. |
| 157 | M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:- |
| 158 | One light point/bell/Fan point controlled by one, one way switch. |
| 159 | One three pin 5 Amp socket on same board with other switches. |
| 160 | One 3 pin 5 Amp socket on independent board. |
| 161 | One light point controlled by two Nos two way switch. |
| 162 | All as per item No.153.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed. |
| 163 | S&F switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed. |
| 164 | S&F switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed. |
| 165 | S&F switch piano flush type 5 amps, single pole two way 240 volts complete all as specified and directed. |
| 166 | S&F bell push piano flush type 5 Amp. complete all as specified and directed. |
| 167 | S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as specified and directed. |
| 168 | S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all as specified and directed. |
| 169 | S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC complete all as specified and directed. |
| 170 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm. complete all as specified and directed. |
| 171 | S&F in repair of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 172 | S&F in repair of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. |
| 173 | S&F in repair of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed. : |
| 174 | S&F in repair of modular bell push, 6 Amp, 1 module, complete all as specified and directed. |
| 175 | S&F in repair of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 176 | S&F in repair of mdoular socket 6 Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 177 | S&F in repair modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 178 | S&F in repair modular TV Socket, complete all as specified and directed. |
| 179 | S&F in repair modular Telephone Socket, complete all as specified and directed. |
| 180 | S&F in repair of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed. |
| 181 | S&F in repair in repair lamp holder with 9W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed. |
| 182 | Supply & fix Mirror Light surface/wall mounting LED batten (1200mm) 20 watt 6500 k Triyca is a 20 W three color CCT change LED batten which can change the color of batten from warm white to natural white to cool white with the help of a simple toggle switch. complete with wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. |
| 183 | Supply & fix Mirror Light surface/wall mounting LED batten (600mm) 20 watt 6500 k warm white/natural white / cool complete with wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. |
| 184 | S&F in repair in repair wall mounted decorative luminarie fitting alongwith 9/10 Watt LED lamp champagne gold finish fixture with plastic body suitable for B22 Base complete all as specified and directed. |
| 185 | S&F in repair recess/surface mounted OCTANE PLUS LED 2X2 PANEL Light 36 W 6500 K Ultra modern recess mounting luminaire with high performance LEDs White or off white, suitable for mounting with Armstrong/Grid ceiling.including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 186 | S & F in repair surface/Recess mounted LED downlight 18 watt round/Square shaped, Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >120 lumen/watt & total system lumens >2150 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed. |
| 187 | S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 188 | S & F in repair Crafted from Aluminum Die Cast with Four-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protectedcomplete all as specified and directed. |
| 189 | S & F in repair Crafted from Aluminum Die Cast with Two-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected complete all as specified and directed. |
| 190 | S&F in repair in repair testing and commissioning energy saving street light luminaire 30 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete alongwith GI Bracket 1.2 mtr made of GI Pipe 32 mm dia suitable for fixing street light on wall alongwith clamps ,nut and bolt all as directed at site complete all as specified and directed. |
| 191 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.complete all as specified and directed. |
| 192 | All as per item No 183.00 here-in-before but with 4 Sqmm complete all as specified and directed. |
| 193 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections , one twin core cable flat or circular 16 sqmm complete all as specified and directed. |
| 194 | S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 195 | S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed. |
| 196 | S&F in repair of MCB SPN 63 Amp capacity, 10 KA , 'C' curve complete all as specified and directed. |
| 197 | S&F in repair of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed. |
| 198 | S&F in repair of MCB TPN 100 Amp capacity, 415 volt, complete all as specified and directed. |
| 199 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 200 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 201 | S&F in repair of in repair MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. . |
| 202 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level complete all as specified and directed. Please Enable Macros to View BoQ information |
| 203 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
