|
| 1 | Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store, complete all as specified and directed. |
| 2 | Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store, complete all as specified and directed. |
| 3 | Cutting existing steel tubing of size 20mm for alterations or additions (Each cut measured) complete all as specified and directed. |
| 4 | M & L for Cutting chases for concealed water tubing of any type of wall, pinning in. making good to facings where required and pointing in CM 1:3 etc., and making good by applying wall care putty etc, cutting not exc 10 cm girth complete all as specified and directed. |
| 5 | Supply and laying of 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laing in floors complete all as specified. |
| 6 | Same as per item No 5 herein before but outer dia of pipe 25 mm |
| 7 | Cutting holes into or through brick walls superficial area exc 150 sqcm but nexc 400 sqcm built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. |
| 8 | S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified. |
| 9 | S&F in repairs 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed. |
| 10 | S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed. |
| 11 | S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed. |
| 12 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 13 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 and n.exc 1000ltr and from mouths of circulating pipes, etc. complete all as specified and directed |
| 14 | S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), complete all as specified and directed. |
| 15 | S&F in repairs 15mm bore angle/stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed. |
| 16 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed. |
| 17 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 18 | S&F in repair Lid for rotational moulded polyethylene water storage tanks (any capcity) complete all as specified and directed |
| 19 | S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges,complete all as specified and directed. |
| 20 | S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed. |
| 21 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on PVC moulding and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 22 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 23 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 24 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 25 | S & F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed. |
| 26 | S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding complete all as specified and directed. |
| 27 | S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified. |
| 28 | S & F in repairs of Vitreous china flat back urinal of size 465x355x265 mm white (minimum) with grating and union for discharge pipe (including flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia fixed in repairs complete all as specified and directed. |
| 29 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints complete all as specified and directed. |
| 30 | S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed. |
| 31 | S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and directed. |
| 32 | S&Fin repairs PVC waste pipe 32mm bore all as specified |
| 33 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 34 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 35 | Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified. |
| 36 | S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 37 | S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 38 | S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 39 | S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed. |
| 40 | S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 41 | S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 43 | M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 44 | M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished, area of each tiles n.exc 0.36 Sqm, but in vertical surface (dado/skirting) to match the shade of floor tiles laid over and including 10mm thick back coat in CM (1:3), complete all as specified and directed. |
| 45 | Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 46 | M&L Glazed ceramic coloured tiles (300x450mm) x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed. |
| 47 | S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen of laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 48 | M&L Complete removal of existing treatment of wall and applying two coats of oil bound distemper, white or colour over one coat of 3mm thick wall care putty over a coat of alkali resistant primer, including cleaning the floor / joinery, surfaces, glass panes complete all as specified. |
| 49 | Material and labour for preparation of old surfaces including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion distemper on wall all as specified and as directed. |
| 50 | Material and labour for prepartion of old painted surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 51 | Material and labour for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 52 | Material and labour for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on ceiling and applying one coat of white wash all as directed. |
| 53 | S & F in repairs for curtain rails with modular brackets, stainless steel, chromium plated with fixing brackets, stops, rollers etc all as specified and as directed |
| 54 | S&F in repair solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 55 | S&F in repair factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed. |
| 56 | S&F in repair of 75mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed. |
| 57 | S&F in repair of 100 mm length aluminum, anodised, barrel tower bolts of extruded section and fixed. |
| 58 | S&F in repair of 100mm size aluminum handles, cast type anodised complete all as specified & directed. |
| 59 | Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed |
| 60 | S&F in repairs anodised aluminimum window shutters (Powder coated), fixed type without sash bar, aluminimum section 0.55kg/m including necessary joining cleats, glazing clips, handles, hinges, screws, rubber packing, anodised aluminimum snap beading screws etc., complete all as specified and directed |
| 61 | S & F in repairs anodised aluminium frame (Powder coated) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 62 | S & F in repairs anodised aluminium door shutters (Powder coated), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, locks, etc. complete all as specified & directed. |
| 63 | S & F in repair of Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed. |
| 64 | S&F for 5.5mm thick sheet glass, ordinary/figured quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed |
| 65 | M&L for 12mm thick prelaminated particle board exterior garade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminimum frame work shutter etc.,all as specified and as directed. |
| 66 | S & F in repair of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 67 | Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 68 | M & L for forming Jambs etc to openings (to forgoings items) incl cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in CM 1:6 complete all as specified and as directed |
| 69 | S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed. |
| 70 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc completed all as specified. |
| 71 | M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed. |
| 72 | S&F Second class hardwood wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 73 | S & F of 35mm thick 2nd class hard wood (Kail) Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed. |
| 74 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 75 | S&F in repair 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 76 | S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 77 | S&F in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified |
| 78 | S&F in repair 150mm long Aluminium handles, cast type, anodised, all as specified and directed. |
| 79 | S&F in repair of floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 80 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed. |
| 81 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed. |
| 82 | M&L Brickwork with sub class B bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed |
| 83 | M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified |
| 84 | M&L Rendering 5mm thick in CM 1:4 with WPC compound over a coat of 10mm thick in CM 1:6 on other than fair faces of brick work surfaces, even and smooth (without using extra cement), complete all as specified. |
| 85 | M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement, complete, all as specified |
| 86 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified. |
| 87 | M&L for preparation of newly plastered surface of walls and finishing wall with Acrylic smooth exteriuor paint of required shade: New work ( Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm. |
| 88 | M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified. |
| 89 | Dismantling of ceiling board of any thickness. Including frame work complete all as specified. |
| 90 | S & F in repair of aluminium snap grid frame work for false ceiling , size of grid 605 x 605 mm all as specified. |
| 91 | M&L 6 mm thick Non asbestos fibre cement building boards in ceiling flat, fixed or laid inserted to aluminium frame works with screws complete all as specified and directed. |
| 92 | M & L in repair for refixing of PVC laminated Gypsum ceiling tiles or Perforated or semi-perforated particle board/tiles obtained from item no 91 complete all as specified and as directed. |
| 93 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) of any thickness including cover fillets complete all as specified and directed. |
| 94 | S&F 5 mm thick PVC sheet fillet of widtyh 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 95 | S&F Solid PVC wall lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 96 | Demolition of cement concrete(un reinforced) in ground floor and pavings not exc 15 cm ( below or above GL ) complete all as specified and directed. |
| 97 | M/L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate, as in sub base to floor finishes complete all as specified and directed. |
| 98 | M&L sand filling under floors including spreading and levelling in layers n exc 25 cm thick, watering and consolidation (Sand cushning) complete all as specified and directed. |
| 99 | S&F Machine pressed precast concrete interlocking paver blocks with grey cement and pigment any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 100 | S&F Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigment , set and jointed and pointed in neat cement slurry in floors over 20 mm thick screed bedding in cm 1:6 complete all as specified and directed. |
| 101 | Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth upto 1m deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank wit complete all as specified and directed. |
| 102 | Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth exc 1m but nexc 2m in deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank wit complete all as specified and directed. |
| 103 | Cleaning of manholes of any description of cross section area n exc 1.00 Sqm and depth exc 2m but nexc 3m in deep including lifting up and removing sludge, accumulated solid sludge and other foreign materials by using vehicle mounted with compressor and sucker tank wit complete all as specified and directed. |
| 104 | Removing blockage from WC by using rubber cup 125mm dia with wooden handle and clearing the blockage upto manhole with cleaing rod including removal of all materials from gully trap of WC and depositing of complete all as specified and directed. |
| 105 | Removing blockage from Kitchen & bathroom/WHB by using rubber cup 125mm dia with wooden handle and clearing the blockage upto manhole with cleaing rod including removal of all materials from floor trap/Nahani trap and depositing of complete all as specified and directed. |
| 106 | Cleaning of blocked sewage pipe lines 100mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing the delogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed. |
| 107 | Cleaning of blocked sewage pipe lines 150mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing thedelogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed. |
| 108 | Cleaning of blocked sewage pipe lines 200mm bore pipe and removing the blockages by means of rodding with and including bamboo splits /flexible iron wire or concrete malacces rods from manhole to manhole, through pipes from trap to MH, rendering the system clear and flushing thedelogged line with sufficient qty of water and removing sludge /waste material etc to outside of MD land complete all as specified and directed. |
| 109 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc in hard/ dense soil complete all as specified and directed. |
| 110 | M&L Reinforced concrete pipes, 100mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1, including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed. |
| 111 | M&L Reinforced concrete pipes, 150mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1 including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed. |
| 112 | M&L Reinforced concrete pipes, 200mm bore class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1 including demolition and breaking of existing salt glazed ware/ AC/ Reinforced concrete pipe complete all as specified and as directed. |
| 113 | Material and labour for concrete bed to SWG/Reinforced concrete pipe line of 100mm bore with PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 114 | All as per Item No 113 described herein before but for 150mm bore pipe. |
| 115 | All as per Item No 113 described herein before but for 200mm bore pipe. |
| 116 | Demolition of reinforced cement concrete concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 117 | Material and labour for mild steel deformed TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 118 | Material and labour for precast cement concrete in (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar 1:6 as in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face including necessary form work complete all as directed. |
| 119 | Material and labour for cement concrete (1:3:6), type C1 (using 20mm graded stone aggregate) as in copings, including weathering, slightly rounded or chamfered angles and throating, as directed., including necessary form work complete all as specified and directed. |
| 120 | Material and labour for rendering 15mm thick in cement mortar (1:4) with WPC on other than fair faces of brick work or concrete surface as in manholes, Septic tank etc., finished fair and even complete all as specified and as directed. Note : WPC shall be measured and paid separately |
| 121 | Supply only Liquid water proofing compound all as specified and as directed. |
| 122 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and as directed. |
| 123 | Removal of excavated surplus soil to a distance exc 50 m and not exc 250m and depositing where directed at a level n. exc 1.50m above the starting point complete all as specified and directed. |
| 124 | Dismantling of MS work of any description not otherwise provided for complete all as specified and directed. |
| 125 | S&F MS rolled sectioons as in main and cross beams, hip and jack rafters, purlins where connected fo common rafters, Fe-410-W(Gde- E -250) quality A complete all as specified and directed. |
| 126 | M&L for preparation of new steel surface over 10 cm width or girth and applying two coats of paint synthetic enamel over a coat of redoxide primer complete all as specified and directed. |
| 127 | Dismantling plain /corrugated steel sheeting any gauge, any thickness in roof covering, valley gutters or wall cladding etc complete all as specified and as directed. |
| 128 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws complete all as specified and directed. |
| 129 | S&F in repairs Chromium plated mixing valves wall mixer including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed. |
| 130 | S&F in repairs Chromium plated mixing valves Basin mixer including two joints to steel pipes or unions and plugging and screwing complete all as specified and directed. |
| 131 | Dismantling exisiting worn out bitumen tarfelt treatment on plastered RCC Roof surfaces and removed from site complete all as specified. |
| 132 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 133 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) mixed with liquid water proofing compound and finished even and fair complete all as specified and as directed. |
| 134 | M&L for PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate ) as in roof kerbs, benching, etc rounding or chamfered angle and throating including mixed with liquid water proofing compound complete all as specified and as directed. Note : Liquid wter proofing compolund measured and paid seperately |
| 135 | M&L 15 mm thick rendering in cm 1:4 over levelling course, finished even and smooth without using extra cement with using liquid water proofing compound complete all as specified and directed. (Note: Liquid water proofing compound will be measured and paid separately) |
| 136 | M&L in repairs for preparing RCC roof surfaces by removing exisiting damaged waterproofing treatment completely, cleaning surface with wire brush, washing with water to remove all loose particles and foreign materials, brushing neat cement slurry using 3.0 kg of cement per sqm complete all as specified and directed. |
| 137 | M&L for applying one coat of bituminous primer @ 200 gms per sqm, and then laying 3 mm thick APP (Atactic Polypropylene) modified bituminous membrane weighing not less than 3.50 Kgs/sqm, reinforced with polyester mat not less than 160 gms/sqm, , laid by torch application method with overlaps of 75 mm on longitudinal joints and 100 mm on transverse joints, all junctions , angles and changes in plane sealed with care . and finishing with aluminium paint @ 100 gms/sq, pver horizontal and vertical surfaces, complete all as specified and directed. |
| 138 | Dismantling of mild steel rolling shutter of any description and type area exc 10 sqm each complete all as specified and directed. |
| 139 | Supplied and fixed Steel Rolling shutters 1.25 mm thickness of laths with gear operated type with bevel gear box and crank handle with ball bearing , as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete all as specified and directed. |
| 140 | Supplied and fixed in repairs ball bearing for rolling shutters complete all as specified and directed. |
| 141 | Supplied and fixed in repairssafety locks mild steel withy 4 levers for rolling shutters complete all as specified and directed. |
| 142 | M&L Preparation of new surface of ceiling and applying two coats white wash complete all as specified and directed. Please Enable Macros to View BoQ information |
